Ubuntu :: 9.10 Installed - No Such Device Error On Bootup
Sep 23, 2010
I decided to fully install Ubuntu 9.10 on my computer Using Entire Disk Space. Installation was completed without any problems so I followed the instructions, Rebooted and took the CD out of the mechanic. After rebooting, when the GRUB was loading, it said the following
Error: no such device: 235ea02c-16b5-4abf-af04-af6767b6848f
I tried rebooting several times, even with CD inside. All it did was it moved to choice of System (normal, safe mode, memory check etc...). When I chose Normal, it just refreshed and did not get me anywhere. The same goes for the safe mode. After a certain while I decided to replace it with 10.04. However, this one stopped at 79% saying sth like Retrieving Data *number* of *number*.
It lasted for too long so I rebooted again, now with 9.10 CD inside again. I installed 9.10 hoping that this time it would work the way it should. However, the exact same thing happend. Installation went smoothly but GRUB booting had that error. Now there is Ubuntu 9.10 on my HDD which would not start so I'm writing this using the "10.04 Tryout".
View 8 Replies
ADVERTISEMENT
Dec 9, 2010
why I'd be receiving this error. I have created a partition and filesystem and put the label in fstab. Everytime I reboot the server it is unable to mount the filesystem. However I am able to mount it manually.
View 5 Replies
View Related
May 6, 2010
I'm sure there is something I have done wrong. I have installed GNOME, but on start up it doesnt give me the option to select it. How can I use GNOME?
View 9 Replies
View Related
Oct 8, 2010
I wanted to try 3d desktop so i installed 3d support for nvidia graphics using the instructions on this webpage [url]
I Dont have nvidia i have ati so needless to say i have to gui when i boot up
It shows the fedora loading bubble then a blinking cursor.
I can get to a virtual terminal.
So how do i undo what i did I just want to get it back to normal i dont need 3d support.
View 3 Replies
View Related
Nov 4, 2010
If I try and install, any distro on a ide External hard drive, Will I still get a Bootup Grub installed on my internal Windows MBR. I am thinking the answer is yes.
View 2 Replies
View Related
Feb 25, 2010
What is the signifigance of this error?
[ 8.427117 render error detected, EIR: 0x00000010 ]
[ 8.427124 ] [drm: i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 8.427133] render error detected, EIR: 0x00000010
I get this error on bootup it seems to have no effect, but I am curious as to what it's implications are. using karmic server
View 2 Replies
View Related
Oct 7, 2015
I am running debian testing on a core i3 laptop with a hybrid graphics setup (intel hd 4000 + radeon r5 m230), after the recent upgrade including linux-image-4.2.0-1-amd64, on bootup ...
I get this error:
Code: Select all[ 10.255177] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
[ 10.264718] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
[ 10.271031] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_smc.bin
[ 10.271037] [drm] Internal thermal controller without fan control
[ 10.271118] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[Code] ...
And this:
Code: Select all[ 19.347705] radeon 0000:09:00.0: WB enabled
[ 19.347709] radeon 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880097816c00
[ 19.347711] radeon 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880097816c04
[ 19.347713] radeon 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880097816c08
[Code] .....
Elsewhere in dmesg I see:
Code: Select all[ 9.802728] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.802731] i915 0000:00:02.0: registered panic notifier
[ 9.802756] radeon 0000:09:00.0: enabling device (0000 -> 0003)
[ 9.803006] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x1179:0xF922).
[ 9.803022] [drm] register mmio base: 0xC2500000
[Code] ....
I don't mind using the intel driver and don't really bother about the the boot-up time increase due to this message..
View 0 Replies
View Related
May 31, 2011
I installed F11 on a SATA 500 GB Hard drive. I plugged this HD in various computers. It worked fine.
However, when I try it on the following platform (the one I have to get it to work): (PC104 bus, AMD 1.1GZ with 512 RAM), I get a file system error during bootup.
On the other hand, the system gave the chance to enter the root password. So, once I did this, I tried to run commands "fsck -f /dev/sda" and "fsck -f /dev/sda1". The command could not find sda or sda1.
I tried the fsck on different platforms (with the same HD), it worked fine.
I returned the CPU board to the vendor, and I am expecting a new board soon. I assumed the problem could be with the board itself. But, I am not sure.
View 1 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
May 24, 2011
i want to use linux but i am having some issues getting it to work on my system. my desktop is a p4 3.4gig with 512 DDR. When I insert my ubuntu CD it starts loading but then i get this screen/message:
Busybox v1.15.3(ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for list of built in commands (initramfs) mount:mounting/dev/loop0 on// filesystem.squashfs failed input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem/squashfs) on //filesystem.squashfs if I put the same disc into my HP laptop it boots up ubuntu fine. (however it won't allow me to get online, but that is a different issue).
View 3 Replies
View Related
Sep 17, 2009
Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies
View Related
May 8, 2010
Since upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?
View 9 Replies
View Related
Mar 17, 2011
I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
View 10 Replies
View Related
Sep 22, 2010
I've been having trouble in a couple of distros (including when I had windows installed..) getting my bluetooth working,
I have a dell vostro 1720, and the specs from dell insist there's a bluetooth adapter installed, and the laptop even has a little light which (ostensibly) indicates data being transmitted via bt... and, it's enabled in the bios.
though, dmesg | grep bluetooth
gives no results.
I've read comments on dell bluetooth for other dists, but can't seem to find any deb-specific recommendations.
So, how do i confirm that this laptop does *in deed* have a bluetooth adapter.. and... if there is one... how do let the kernel know about it?
View 2 Replies
View Related
Mar 23, 2011
I downloaded ubuntu 10.10 in my PC alongside with windows 7 yesterday. However it could not detect my wireless LAN then with some hardwork I was able install the wireless device driver but still no internet!
View 1 Replies
View Related
Jul 12, 2010
I am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
View 9 Replies
View Related
Jan 25, 2010
I installed the following packages:
ieee80211-kmdl-2.6.18-164.10.1.el5-1.2.18-22.el5.i686.rpm
ipw2200-kmdl-2.6.18-164.10.1.el5-1.2.0-45.2.0.1.el5.i686.rpm
from [URL] How to remove them completely? The ipw2200 driver complains that it could not agree with certain symbols in ieee80211 module. Before taking another route, I would like to know how to completely remove the files installed by these driver packages.
View 8 Replies
View Related
Aug 1, 2010
How do you determine the source and version of a device driver in your linux box? (The wifi driver, for instance.) In windows you can find that info using "device manager". I suppose there is some corresponding tool in linux.
View 2 Replies
View Related
Jul 18, 2010
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
View 6 Replies
View Related
Mar 17, 2011
So I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong
Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.
View 6 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
Apr 12, 2010
[code]...
How do I fix this?
View 5 Replies
View Related
Jun 14, 2010
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
View 5 Replies
View Related
Feb 26, 2010
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
View 6 Replies
View Related
Mar 8, 2010
I am trying to update Fedora 12 but I always get this error.
Error Type: <class 'yum.Errors.RepoError'>Error Value: Error getting repository data for installed, repository not found File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main() File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
[Code]...
View 3 Replies
View Related
Oct 12, 2010
I decided to go ahead and try out Ubuntu for the first time (never used a Linux OS before) ...it hasn't gone well to say the least. I downloaded the wubi installer and installed the netbook version of Ubuntu (10.04). It was installed on my Samsung NC10, where Windows XP installed on a small partition and program files were kept on the other larger partition. Ubuntu was installed onto the larger partition. After booting into Ubuntu there were some updates which came up, so I went ahead and and let it update... after that it needed to restart -- and from there things have never been the same I now get a "Error: no such device <enter some random letters and numbers here>" error.
I tried googling the solution but haven't managed to get anything to work. I put Ubuntu onto a USB and so I can get into that "live" Ubuntu; I've tried all sorts of strange and meaningless (to me, anyway) commands in Terminal... nothing has worked. I even went into the drive and deleted Ubuntu thinking that perhaps that would stop it trying to load Ubuntu but that didn't work either -- probably not a good move, but I'm desperate. Right now, I'd be quite happy to just fix Windows and forget about Ubuntu. I really need to get this sorted within the next 3 hours before Uni.
View 9 Replies
View Related
Nov 9, 2010
after a failed update attempt from 10.04 to 10.10 I tried to just do a fresh install of 10.10.
This is the error message I am getting:
error: no such device 3f83145b-1925-4793-b0c5-2779446c6b1b
I have tried reinstalling grub with no luck. I have 4 hdd in this machine and I have had various ubuntu installs on them over the years so that may be causing issues. I also ran something that was supposed to delete the mbr and I ran it for each hdd. Currently I am booted into a 10.10 live cd.
View 9 Replies
View Related
Feb 9, 2010
I've reinstalled grub2 in my kubuntu. Iarchive/index.php/t-1215062.html have kubuntu and windows xp. Now, when I choose the option "Windows_xp" it says me:
Error: no such device: ACB00A7FB00A506E
View 1 Replies
View Related
Feb 12, 2010
I am running a Windows 7/Karmic Koala Dualie. I was running Windows 7 first, Shrank Windows, partitioned the drive using the 40 free unallocated gigs of the 300 gig hard drive, and installed a fresh install of Karmic Koala to that. This has been working just fine (minus a few graphic driver issues) for the last week or so. Then wanting all my content to be available to both system and my network easily I decided to shrink the Windows 7 side, and use the 90 now free gigs to create a FAT32 Partition (using Partition Wizard after I had defragged the disk) The process runs fine, I boot back into Ubuntu where I have made my Windows 7 drive NTFS partition mount automatically, and I pull my videos and music to the new partition. At this point everything is going great till I fill the partition, and I decide to boot back into Windows to decide if I need to shrink windows to make the new partition any bigger. Well this time I go to GRUB hit windows and I get: Error: No Such Device: 01caab4e3c9fb9e0
View 3 Replies
View Related
Jun 9, 2010
My dmesg is full of this messages:
Code:
[ 31.571682] +------ PCI-Express Device Error ------+
[ 31.571684] Error Severity: Uncorrected (Non-Fatal)
[code]....
View 2 Replies
View Related
