Fedora :: File System Error During Bootup
May 31, 2011
I installed F11 on a SATA 500 GB Hard drive. I plugged this HD in various computers. It worked fine.
However, when I try it on the following platform (the one I have to get it to work): (PC104 bus, AMD 1.1GZ with 512 RAM), I get a file system error during bootup.
On the other hand, the system gave the chance to enter the root password. So, once I did this, I tried to run commands "fsck -f /dev/sda" and "fsck -f /dev/sda1". The command could not find sda or sda1.
I tried the fsck on different platforms (with the same HD), it worked fine.
I returned the CPU board to the vendor, and I am expecting a new board soon. I assumed the problem could be with the board itself. But, I am not sure.
View 1 Replies
ADVERTISEMENT
Mar 8, 2010
Sometimes, in fact quite frequently, when I boot up my system, PulseAudio does not work. ('Connection Refused'). If I log out of my normal account, log in as root, log out of root, and log back in to my normal account, this seems to reset Pulse Audio and it works again. Seems like a security glitch, but I can't be sure.
Fedora 9
Intel Celeron 1.2GhZ
20 GB HD
384 MB RAM
View 1 Replies
View Related
May 30, 2011
All of a sudden my production system changed to read only. Ran fsck and it ran for about 5-10min before it crapped out. Now when rebooting, getting an ext3-fs error, attached is an image. The system is on an ESX environment.
View 1 Replies
View Related
May 2, 2010
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
View 9 Replies
View Related
Apr 27, 2010
I've got a fresh install of RHEL5 with updates installed running on a PC104. If the machine starts up the screensaver, I can't ever get out of it. The mouse pointer comes back up on the screen, but the desktop doesn't appear or a box to enter a password. I try to reboot X and get an error that X can't be started and it drops me to a prompt. I reboot from the command line and then I get the filesystem error and have to wait 2 hours while it scans.
View 4 Replies
View Related
Sep 14, 2009
I have Red Hat Enterprise 5 and am trying to resize a partition. I am using the resize command within "parted" and am getting the following error - Error: File system has an incompatible feature enabled.
View 3 Replies
View Related
May 14, 2009
reducing the size of LVM. I did it by using the commands, lvreduce,fsck,resize2fs.After reducing the lvm size, my system is not booting...it is saying file system corrupted error.
View 1 Replies
View Related
Jun 22, 2010
i was browsing one of my friend hard drive using knoppix live CD, i was amazed to find that all the folder which he uses was empty, there was no files present in them, for example there was a folder in /usr/local named web, but when i browsed that folder using knoppix it was empty.I searched for files in every partition but still no result found.
After some time when i placed hard disk back and booted the PC normally, everything was in its proper place. Then i thought to make image of the hard drive and use it on my PC, the image booted well, but still those particular files were missing. I want to know how is that possible? Is there any way to get files from the remote system during bootup?
View 8 Replies
View Related
Feb 13, 2010
I just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options. I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system. Even better if there is something I can do is there also another command that can bring back that interface I was used to.
View 3 Replies
View Related
Oct 7, 2015
I am running debian testing on a core i3 laptop with a hybrid graphics setup (intel hd 4000 + radeon r5 m230), after the recent upgrade including linux-image-4.2.0-1-amd64, on bootup ...
I get this error:
Code: Select all[ 10.255177] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
[ 10.264718] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
[ 10.271031] radeon 0000:09:00.0: firmware: direct-loading firmware radeon/hainan_smc.bin
[ 10.271037] [drm] Internal thermal controller without fan control
[ 10.271118] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[Code] ...
And this:
Code: Select all[ 19.347705] radeon 0000:09:00.0: WB enabled
[ 19.347709] radeon 0000:09:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880097816c00
[ 19.347711] radeon 0000:09:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880097816c04
[ 19.347713] radeon 0000:09:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880097816c08
[Code] .....
Elsewhere in dmesg I see:
Code: Select all[ 9.802728] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.802731] i915 0000:00:02.0: registered panic notifier
[ 9.802756] radeon 0000:09:00.0: enabling device (0000 -> 0003)
[ 9.803006] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x1179:0xF922).
[ 9.803022] [drm] register mmio base: 0xC2500000
[Code] ....
I don't mind using the intel driver and don't really bother about the the boot-up time increase due to this message..
View 0 Replies
View Related
Feb 25, 2010
What is the signifigance of this error?
[ 8.427117 render error detected, EIR: 0x00000010 ]
[ 8.427124 ] [drm: i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 8.427133] render error detected, EIR: 0x00000010
I get this error on bootup it seems to have no effect, but I am curious as to what it's implications are. using karmic server
View 2 Replies
View Related
Sep 2, 2011
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies
View Related
Mar 16, 2011
I have configured my system to connect to a wireless network on bootup, but now every time I boot I have to wait and watch it connect (it outputs some dhcp connect stuff) which delays the boot process. is there any way to just initialize the script and then go on with the boot process instead of letting it output some pointless crap and waiting for it to end?
View 5 Replies
View Related
Sep 23, 2010
I decided to fully install Ubuntu 9.10 on my computer Using Entire Disk Space. Installation was completed without any problems so I followed the instructions, Rebooted and took the CD out of the mechanic. After rebooting, when the GRUB was loading, it said the following
Error: no such device: 235ea02c-16b5-4abf-af04-af6767b6848f
I tried rebooting several times, even with CD inside. All it did was it moved to choice of System (normal, safe mode, memory check etc...). When I chose Normal, it just refreshed and did not get me anywhere. The same goes for the safe mode. After a certain while I decided to replace it with 10.04. However, this one stopped at 79% saying sth like Retrieving Data *number* of *number*.
It lasted for too long so I rebooted again, now with 9.10 CD inside again. I installed 9.10 hoping that this time it would work the way it should. However, the exact same thing happend. Installation went smoothly but GRUB booting had that error. Now there is Ubuntu 9.10 on my HDD which would not start so I'm writing this using the "10.04 Tryout".
View 8 Replies
View Related
Mar 31, 2010
I am using Ubuntu server 9.10. Also for shutdown and restart too.
View 3 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
May 24, 2011
i want to use linux but i am having some issues getting it to work on my system. my desktop is a p4 3.4gig with 512 DDR. When I insert my ubuntu CD it starts loading but then i get this screen/message:
Busybox v1.15.3(ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for list of built in commands (initramfs) mount:mounting/dev/loop0 on// filesystem.squashfs failed input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem/squashfs) on //filesystem.squashfs if I put the same disc into my HP laptop it boots up ubuntu fine. (however it won't allow me to get online, but that is a different issue).
View 3 Replies
View Related
Dec 9, 2010
why I'd be receiving this error. I have created a partition and filesystem and put the label in fstab. Everytime I reboot the server it is unable to mount the filesystem. However I am able to mount it manually.
View 5 Replies
View Related
Aug 26, 2009
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies
View Related
May 31, 2010
Was struggling with this for a little, no really clear answers around.Anyways, edit /etc/mstab, kill the entire line with the faulty drive.Unplug the drive/usb, restart, then do a
Code:
sudo fsck -r /dev/whatever
umount it, then remount and it should be fixed
View 1 Replies
View Related
May 22, 2010
I can't insert songs in my iPod nano.There is an error occurs which says that it is a 'read only file system' in ubuntu
View 7 Replies
View Related
Jun 10, 2010
Ubuntu Desktop 9.04 file system maintenance error at start up (press ctrl+d to continue)
View 3 Replies
View Related
Mar 10, 2011
I have a Hp Netbook, and my friend installed Ubuntu to my computer. Everything was going fine, until one day my battery died while I was searching the web. I turned it back on and It started checking files and then it took me to a black screen with white letters saying "File System check failed".
View 3 Replies
View Related
Apr 13, 2011
I have a dual boot Xp and Ubuntu 10.10.
Recently I was downloading some upgrades in Ubuntu and unfortunately the power to the system got off.
Thereafter on booting it comes to the Grub menu and I'm able to select the OS from the list but if I choose Ubuntu it comes up with a message "General error mounting file system" and the terminal is activated. However, if XP is selected it boots with no issues.
/dev/sda6 is ubuntu installation
/dev/sda7 is swap partition
I went through lot of threads over the net and tried fsck, e2fsck and other variations of that command but at the end all I get the message as
it says sda6 is clean but for sda7 it says :
Superblock invalid trying backup blocks.... Bad magic number in super-block while trying to open /dev/sda7 at the end it suggests "u might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device>"
refering some threads here I tried my luck with live CD and the command : sudo e2fsck -C0 -p -f -v /dev/sda7
View 9 Replies
View Related
May 18, 2010
i have problem during boot my F11 , the problem is :
Code:
checking file systems
/dev/sda7 : superblock last time ( etc... )
/dev/sda7: Unexpected inconsistency ;run fsck manually (i.e,without -a or -p option)
***an error occured during the file system check
***dropping you to shell:
View 2 Replies
View Related
Jan 4, 2011
I regularly rsync directories to an external usb drive. Recently I've started getting errors which look:
blah blah:Read-only file system (30)
The external usb drive has two partitions (ext3 and fat32) and I rsync to the ext3 one. The rsync command is
rsync -ahi --delete /home/mike/some_dir /media/usb_drive
People have reported this error with faulty usb cables but everything was working fine until recently so it seem unlikely a usb cable would suddenly wear off.
View 6 Replies
View Related
Feb 2, 2010
An error occurred during the file system check, dropping you to a shell; the system will reboot when you leave the shell. Give root password maintenance (or type control D to continue)
View 13 Replies
View Related
Sep 29, 2010
i installed ubuntu 10.04.. all very nice, but not the os for me.. lightscribe problems, front ir panel problems. minor niggles for sure, but enough for me to go ahead with formatting and installing windows. simple job...or so i thought... using windows set up, i formatted c: and continued with install...on first restart i got a grub error saying unknown file system... i have tried loads of different things... fix mbr fixboot, that nt60 one. dban wouldnt work either.. im at my wits end ive spunked the best part of 1000 on this system and my wife is nagging me.
View 4 Replies
View Related
Nov 28, 2010
I'm having real issues installing 10.04 to an SSD - I had one SSD fail, and have replaced it with a brand new one, but the 10.04 installer fails at beginning to write files to the disk with this error:
[Errno 30] Read-only file system: '/target/bin'.
Curiously:
* Windows XP will install to this SSD with no issues
* I can install 10.04 to a standard HDD with no errors.
What is happening that is stopping me from installing 10.04 to this drive? I am fairly sure that there is no issue with the SSD (I have two brand new, identical OCZ Vertex II 60gb drives which both encounter this error.)
I have tried partitioning the drive using gparted on another machine, leaving 5mb free at the start of the drive, and having a single partition for /, and a 1gb swap partition. "Round to cylinders" was unchecked. The partitioning was successful, and the drives can be mounted on my other machine, but the 10.04 installer encounters the same error.
View 1 Replies
View Related
Feb 4, 2011
Installed Ubuntu 10.10 and it works very well except I cant format cd or dvds. I am using the disk utility program in administration and keep getting the following error:
Error creating file system: helper exited with exit code 1: Error calling fsync(2) on /dev/sr0: Input/output error
I have tried mounting and unmounting - makes no difference.
View 3 Replies
View Related
