Ubuntu :: PCI-Express Device Error?
Jun 9, 2010My dmesg is full of this messages:
Code:
[ 31.571682] +------ PCI-Express Device Error ------+
[ 31.571684] Error Severity: Uncorrected (Non-Fatal)
[code]....
ADVERTISEMENT
Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add
Sep 17, 2009Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies View RelatedGeneral :: Can't Find Boot Device - Error "Unable To Determine Major/minor Number Of Root Device"
Mar 17, 2011I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
Ubuntu Servers :: Error: No Such Device, Error: No Such Disk
Jul 12, 2010I am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
Software :: 10.04 - Couldn't Open Localsound Device Error 2 Client Side Error: Could Not Set Up A Stream
Jul 18, 2010I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
Fedora :: Error: "Error 11: Unrecognize Device Strong
Mar 17, 2011So I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong
Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.
Ubuntu :: Db2 Express-c First Steps Fails To Launch?
Jul 9, 2010i have a problem "db2 express-c first steps fails to launch on ubuntu" then firefox appears it shows something like :
Quote:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product.The use of First Steps to access product information requires one of the following types of connections to a DB2 Information Center. Internet access to the online DB2 Information Center A locally installed version of the DB2 Information Center Access to a remotely configured DB2 Information Center
Ubuntu :: Paltalk Express Not Working / Resolve This?
Jul 17, 2010Any Paltalk Express users out there?
This morning I tried to login to Paltalk Express (http://express.paltalk.com), but when I was about to write my password suddenly the screen turned black, and couldn't do anything else. I tried erasing the private data on my browser, restarting the browser, reloading, but didn't work.
I tried removing and installing flash, but still the same.
Ubuntu Installation :: Install Logitech Express On 10.04 - (x86)?
Sep 1, 2011I found my web cam it is a Logitech Express cam I just want to know how to get the driver so I can use it in Firefox for like tinychat it works for cheese fine but That doesn't mean that it works for my web browser?
View 1 Replies View RelatedHardware :: Need G41 Express Drivers For Red Hat
Jul 12, 2010Any G41 Express drivers for red hat
View 1 Replies View RelatedUbuntu Networking :: LG P1 Express Dual - Nothing On BIOS About Wireless
Feb 17, 2010Recently I installed ubuntu in my LG P1 express dual laptop, and got it working with the sound, webcam, and LAN. It took me a while, but I have learned a lot. The thing is, I cannot manage to set up wireless networking working. For what I read and discovered, it has to do with an internal RF switch that deactivates the wifi card. On windows, one may switch it on or off with fn+F6. However, that is not working on linux. How to access and change this switch with a command or something?
Nothing on BIOS about wireless. When I do
Code:
sudo cat /var/log/messages | grep -i wireless
I get:
Code:
Feb 17 20:08:34 XXXXX kernel: [27.889915] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Feb 17 20:08:34 XXXXX kernel: [29.163795] Kill switch must be turned off for wireless networking to work.
On doing: iwconfig, it reads:
lo no wireless extensions.
eth0 no wireless extensions.
So no wlan0 is listed.
However with "sudo lshw -C network" the network is there and the driver is loaded
*-network
description: Ethernet interface
product: ET-131x PCI-E Ethernet Controller
vendor: Agere Systems
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02 .....
Ubuntu Networking :: Finding A Wireless Express Card?
Jan 11, 2011after about 3 12 hour days of messing with it, i'm nearly positive there is no way the onboard broadcom wireless is going to work. (it's an hp dv9000 running ubuntu studio 10.4)can someone recommend a wireless express card that will work out the box with no troubles?
View 2 Replies View RelatedUbuntu :: Mail Client Similar To Outlook Express
Mar 2, 2010Is there any mail software for linux that is like outlook express that works with hotmail without having to configure it for hours?
View 3 Replies View RelatedGeneral :: Check Whether PC Supports PCI Express?
Feb 19, 2010I'm trying to figure out whether my system supports PCI Express without opening up the box. lspci doesn't mention "Express" or "PCI-e" anywhere, but dmesg reports that a "PCI Express Hot Plug Controller Driver" is in use.
View 3 Replies View RelatedNetworking :: How To Express Range Of Ip Addresses
Sep 22, 2010I do not currently fully understand relationship between binary numbers and ip addresses and subnet addresses; nor am I asking for an explanation here at LQ, when there are plenty at wikipedia and other places...
Even after reading the wikipedia article on it, I still don't grasp it completely, so I was hoping that someone who grasps it in its entirety could answer a simple question.
How can I express the range of ip addresses from 172.22.22.200 - 172.22.22.230 ?
I was trying to make a rule for iptables that only did nat on that specific range of ips, and when i tried used the "-s" flag followed by 172.22.22.200/11 it always changes to 172.0.0.0/11 in the actual rule that is created and displayed by iptables -t nat -L.
I already have many hosts defined on my network, and rather than going through each one and changing its ipaddress to 172.0.0.#, I was hoping to learn a way to represent them in the iptables rule.
Ubuntu :: Got Error : No Such Device / Fix It?
Oct 12, 2010I decided to go ahead and try out Ubuntu for the first time (never used a Linux OS before) ...it hasn't gone well to say the least. I downloaded the wubi installer and installed the netbook version of Ubuntu (10.04). It was installed on my Samsung NC10, where Windows XP installed on a small partition and program files were kept on the other larger partition. Ubuntu was installed onto the larger partition. After booting into Ubuntu there were some updates which came up, so I went ahead and and let it update... after that it needed to restart -- and from there things have never been the same I now get a "Error: no such device <enter some random letters and numbers here>" error.
I tried googling the solution but haven't managed to get anything to work. I put Ubuntu onto a USB and so I can get into that "live" Ubuntu; I've tried all sorts of strange and meaningless (to me, anyway) commands in Terminal... nothing has worked. I even went into the drive and deleted Ubuntu thinking that perhaps that would stop it trying to load Ubuntu but that didn't work either -- probably not a good move, but I'm desperate. Right now, I'd be quite happy to just fix Windows and forget about Ubuntu. I really need to get this sorted within the next 3 hours before Uni.
Ubuntu :: Error: No Such Device?
Nov 9, 2010after a failed update attempt from 10.04 to 10.10 I tried to just do a fresh install of 10.10.
This is the error message I am getting:
error: no such device 3f83145b-1925-4793-b0c5-2779446c6b1b
I have tried reinstalling grub with no luck. I have 4 hdd in this machine and I have had various ubuntu installs on them over the years so that may be causing issues. I also ran something that was supposed to delete the mbr and I ran it for each hdd. Currently I am booted into a 10.10 live cd.
Ubuntu Installation :: Configure Xorg For Intel Q45/Q43 Express Chipset
Mar 31, 2010We have a PC in the office to which I have been granted to install Ubunto 9.04 on it. It has an intel graphic card Q45/Q43 Express Chipset.
I will proceed with the installation in a 1-3 weeks but I am expecting to have problems related to the graphic card not being seen or not configured ok.
Can you tell me how to configure it and what would its xorg.conf look like ?
Until I do the installation, I can use the Live-CD to test out your suggestions or do queries.
Ubuntu Servers :: Email In Outlook Express Has Stopped Working?
Sep 28, 2010i somehow managed to get squid proxy server installed.My problem is my email in outlook express has stopped working (incomming pop3 server is mail.webmail.co.za)I think i need to install a pop proxy to get this going, can someone recommend a pop proxy that is easy to configure or anything else that could resolve this.
View 9 Replies View RelatedUbuntu Networking :: Printing Over The Internet To Intel Netport Express?
Jun 10, 2011Is it possible to to print to a printer on a netport express 10/100 over the internet ?
I have printing working from all computers on the same internal network as the netport express.
But I have two phone lines with two routers / ISP's
And I would like the computers on the other network to be able to print the the first networks printer.
Hardware :: Logitech Webcam (quickcam Express Plus) Won't Work With Ubuntu 8.04?
May 17, 2009I'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
Debian Configuration :: No Sound With ION Tape Express
Dec 21, 2010I bought the ION Tape Express to convert all my cassette tapes to mp3 on my computer. The software that came on the CD works fine in Virtualbox windows XP. I could be happy with this but would rather use Linux. The problem is Debian Squeeze sees the new USB device but I can't find a program that will record from it. I've tried gnome-sound-recorder, looked at k3b Audacity and several others. It might be because I don't know how to select the usb sound device.
chevy@debian:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 006: ID 0a5c:2148 Broadcom Corp.
Bus 006 Device 005: ID 0a5c:4503 Broadcom Corp.
Bus 006 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 006 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 006 Device 002: ID 0d8c:0121 C-Media Electronics, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Red Hat / Fedora :: Autoload A Module In Pci-express Slot?
Jan 14, 2010autoload a module in my pci-express slot for every boot.For me to load the module, i need to:(i) enter /ixpio directory in root's home.(ii) type "./ixpio.instCan I do an autoload by doing this?as root: edit /etc/rc.d/rc.local and put the lines:-"cd ixpio""./ixpio.inst"
View 2 Replies View RelatedGeneral :: Uninstall Libasound2-dev Package Came With DB2 Express-c?
Jan 28, 2011I have installed db2 express-c on Ubuntu 10.04 server using apt-get; the installation is successful but I noticed that libasound2-dev package has been installed along with db2.I don't want this ALSA sound package, when I tried to remove it by "apt-get remove" it was trying to uninstall DB2 as well as there is a dependency. So, how do I remove ALSA package without removing DB2 ?PS: Also, db2 installed X11 packages like libx11-dev, libxproto-core-dev etc., which are also not need for me as it is a sever OS.
View 4 Replies View RelatedSoftware :: Dovecot SSL Microsoft Outlook Express?
Nov 26, 2009When I log in with shell It connects and reads the SSL on port 993. The problem is when I use SSL for the email client it gets the error on the email side and it doesn't work. Out going mail on the postfix works, and also incoming and outgoing on my actual server works. I have one email set up there for testing. I am really confused. This is not a self signed SSL either. I tried to create a dovecot.pem but it won't work. How do I create the dovecot.pem for a non-self signed SSL?
here is the path:
ssl_cert_file = /path/to/mail_domain_com.crt
ssl_key_file = /path/to/private/mail.domain.com.key
It should be:
ssl_cert_file = /path/to/dovecot/certs/dovecot.pem
ssl_key_file = /path/to/dovecot/certs/private/dovecot.pem
When I try to use the mkcert.sh it doesn't put the files in the places it should go. I did edit both the mkcert.sh and the dovecot-openssl.cnf.
Software :: How To Express Built-In Variable, RS In Awk Command
Apr 26, 2011I am going to separate records with the string, "[J.System Info]" in awk command.
Both of the following expressions don't work well.
Code:
RS = "[J.System Info]"
(or)
RS = "[J.System Info]"
Ubuntu :: Installing Epilog Express Engraver Model 2000 25a Laser?
Jan 12, 2010My dad owns a business and the computer he uses for engraving uses Windows 98 and he wants to upgrade and he likes ubuntu and I want to know how to install an Epilog Laser Engraver model 2000 25a laser!
View 2 Replies View RelatedUbuntu Servers :: Oracle 10 Express - External IP Address Access Failure
Feb 5, 2010I just installed the Ubuntu 9.10 and then installed Oracle 10 Express and all went fine. I can access oracle on 127.0.0.1:8080/apex address however when I try to access the server on it's external ip address (192.168.1.14) even when I'm on my Ubuntu machine it's failing. I'm new to Linux so I'm sure this should be silly and simple issue but I can't find a way around it. I need this so I can access the oracle server from outside world (other nodes on the network).
View 1 Replies View RelatedUbuntu Multimedia :: PCI Express Creative Sound Blaster X-Fi Xtreme Audio?
May 6, 2010I've recently installed Linux Mint 8 64-bit on my computer and getting my sound card to work. I've been searching around the internet for solutions but I know next to nothing about computer audio.
My sound card is a PCI Express Creative Sound Blaster X-Fi Xtreme Audio. Came with my computer. Told it uses the SB Audigy chipset. Using the onboard audio is not an option. The card shows up in Sound Preferences under the Hardware tab, but I cannot get sound from it. Here's what they told me to do:
Install the karmic alsa backports through the Terminal Install hidden Level 5 updates to update the kernel
Disable every audio device except the SB card (the others are onboard and HDMI) Check volume levels in alsamixer, PulseAudio Device Chooser and Volume Control I also tried to install the OpenAudio driver (not sure, will double check), which crashed Linux every time I try to activate it.
Ubuntu Multimedia :: Ancient Logitech Express (046d:0850) Webcam With Low FPS
Jul 19, 2010I have an ancient Logitech Express webcam (046d:0850) that worked immediately when I installed 10.04 Lucid Lynx, except for a frame rate issue. GUVCVideo has the frame rate at between 1-3 fps. I'd like to see it at between 25-30. The video options within guvcvideo DO NOT allow me to adjust the frame rate, resolution, or auto-exposure. Cheese works, skype works, and camorama doesn't. All functioning programs have the fps issue.
In searching around, all I've found is some wild goose chases promising pots of gold that some leprechaun must have stuffed up his keister because they don't work for me.