I am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
I just did a clean install of 11.04. Now when I try to boot the machine I get the following error: Quote:
error: no such device
error: no such disk
error: you need to load the kernel first
Then I am taken to the Grub menu. Selecting anything from the Grub menu brings this error back up. So now I'm stuck with a computer that won't work.?
On Ubuntu Server 10.10 the second bond device won't come up. Someone please advise the correct configuration. Error message when I run /etc/init.d/networking restart:
Code:
SIOCSIFADDR: No such device
bond1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
bond1: ERROR while getting interface flags: No such device
bond1: ERROR while getting interface flags: No such device
Failed to bring up bond1.
[code]...
The system is an old AMD Duron 650MHz that was dug out of the garbage, trying to set it up as a light duty server. I installed ubuntu 10.04 with no errors or troubles during the install, however whenever the system is booted it sits at a cursor for about a minute then goes into busybox giving the error "Gave up waiting on root device." and says that the hard drive does not excist. If I sit at busybox for about another minute and type exit it then boots ubuntu 10.04 with no errors or issues.
View 7 Replies View RelatedI just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
I have 10.04 desktop basically running xbmc sabnzbd and as a file server. the loads aren't too large as it is just for my house. But i moved from a server install to the desktop because of sound issues and running xbmc at start was a bit of a pain... so bit of background done.
My problem is that after installing 10.04 i got the disk utility pop-up saying one of samsung spinpoint 1tb (HD103UJ) has a critical error... now i didn't panic (although in the next couple of months i am intending to get another drive) but in the meantime i am simply wondering if this is a false flag? i've been getting this error for over 6 months now... pretty much from the last time i formatted the disk, i wiped it and then used dd to copy over a smaller partition, after which i used gparted to grow the partition to the whole drive. could this have created a false flag?
The 184 error is the only one, here is all the data i can glean from my system, attached is a screen of the relevent info from the disk utility, and this it from smartctl:
Code:
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
So I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong
Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View Relatedi finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
I'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below,
array 1:
slot 0 & 1
array 2:
slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.
I recently setup a new server that serves files over samba and is a subversion repository for a number of projects. I did a simple apt-get update/upgrade for which the system requested a reboot. After I rebooted, I got to the login prompt, at which point I ran into a problem. After I enter my correct credentials, it spits out the following error:
sh: error while loading shared libraries libc.so.6: cannot open shared object file: Error 24
and returns me to the login prompt. Samba and Subversion are both still working, I simply can't login to the server either physically or via SSH.
What steps should I be taking to correct this issue? My thoughts are that I may need to use a Live CD to load the system and perhaps do another update, but before I go through that process I just wanted to check in and see if there might be some other solution.
I have tried googling the issue, and while I have seen other posts regarding shared library issues, there was never anything about not being able to login and I never did find anything specific to the error message I received.
I'm running Ubuntu 10.04 with a complete LAMP installation (for local developement purpose).
Everything is OK (I installed phpMyAdmin without problems) except for one big problem: php shows 500 server internal error instead of a complete error report.
I tried editing php.ini and in-script runtime configuration but nothing changed.
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies View Relatedwhen ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies View RelatedI am facing some strange problem of mysql replication with ssl, my replications which working fine from more than 6 months currently stopped working after i upgrade mysql in to newver version mysql-5.1.41-2, i create new ssl self singed certs but still no sucess, when client try to connect the master using ssl its gives error SSL connection error ERROR 2026 (HY000), with out ssl its working f9.
Platform --> Fedora-11 + mysql-5.1.41-2 (both master/client)
I can seeking the problem on net, and i found the below bugzilla url related to that.
[url]
I read it but not get , either new version support x509 ssl certs or not or either new version support ssl replication or not, here below my server configuration for ssl serts
And for client
Both server and clients certs are signed with same ca but still its currently not working after the mysql upgrade first 5.1.41 and then 5.1.41-2
Either as above bugzilla url, currently mysql support ssl replication or not, or either some need to do special for working with ssl. or i wait for newver version of mysql to fix if its bug or not.
Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies View RelatedI use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedThis is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View RelatedI tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
I have downloaded NETINSTALL disk from debian.org burned it and during installation it says that error and inst will not continued. This disk havent error replace disks and reburned them. On this computer debian 6 has been installed two weeks ago. "Running post-installation trigger fontconfig" on this stage i have fail.
View 6 Replies View RelatedI just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies View RelatedIf I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View Related