I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
Hello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
I have an HP OfficeJet 5610v installed on my system, and cups can print the test page. I can also get the test page to print via [URL] which appears to be printed under the anonymous user. Now if I attempt to print the test page via the printer control panel from windows, I get the following sets of error:
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
CUPS is showing that the "user" is my XP login name so I added that user to Linux and even added that account to the "lp" group and still get the above errors.
ibv4l2: error turning on stream: No space left on device
Webcam work in:
fps: 1/30
formate:JPEG/WMV
it works not perfect on guvcview
I wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:
Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault
I've been having issues with the omega.cert on Pidgin and tried to upgrade to 2.7.7 today. I clicked on the link from the Pidgin site to download the ppa package "pidgin-ppa_0.0.3_all.deb" and tried to open with GDebi Package Installer but it tells me it couldn't be opened because an unknown error occurred.
View 5 Replies View Relatedi tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
When I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
i need to install vpnc in amazon ec2 fedor 8 instance. i have installed with yum install vpnc commaned. And i have placed config file in /etc/vpnc/some.conf. but it is not connecting and giving the following error.
vpnc: can't open /dev/net/tun, check that it is either device char 10 200 or (with DevFS) a symlink to ../misc/net/tun (not misc/net/tun): No such device.
My scanner is Benq 5000 ,the default scanning software (xsane) give me the following message whenever I plug the scanner to the pc :
Failed to Open Device 'Snapscan:libusb:005:002' Invalid Argument.
I tried the gnome image scanning software too but it didn't recognize the scanner at all. The only software that worked is vuescan but unfortunately it is non-free software !!!!
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies View RelatedI'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.
The nfs options are: "noatime, nolock, hard, udp, notcp, nosuid, nodev, rsize=8192, wsize=8192, actimeo=60"
The kernel version is: 2.6.16.27 built with 250 Hz. Is this an already corrected issue in a kernel version? Or are my options wrong?
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies View RelatedI've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
View 9 Replies View RelatedGNU Emacs 23.1.1 I've noticed that if I run Emacs and M-x server-start, I can use the emacsclient program as usual, but if if I start Emacs using emacs --daemon and then try to use emacsclient the new frame locks up and the shell outputs *ERROR*: Arithmetic error. This issue doesn't happen if I use the -t flag to force terminal mode when running emacsclient.
View 2 Replies View RelatedI am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
View 2 Replies View RelatedI hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
View 1 Replies View RelatedI noticed after upgrading my Dell D820 from 11.3 x 64 to 11.4 x64 that splashy seems to crash while trying to render the theme (while hibernating). Running a splashy test returns the same error: "Splashy ERROR: Couldn't splashy_start_splashy(). Error -10". Using the default theme instead or re-installing splashy does not make any difference.
View 2 Replies View RelatedSo I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong
Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedI am running Fedora 15 and want to add a network printer (Brother HL 2040) on a Win pc reunning XP pro. Fedora finds the network printer, shows that is shares, but when I try to finish I get the above message. I have emptied the spool file of the test page I tried earlier and nothing but the tmp file remains. Anyone have any suggestions?
View 1 Replies View RelatedI was googling a lot but did not find any solution for my problem.The problem is next. I've seen that xmms2 consumed too much CPU usage and changed the alsa.device config to hw:0,0
Code:
xmms2 config alsa.device hw:0,0
everything was good, xmms2 played music and xmms2d stopped to abuse CPU.
[code]...
I am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
I have been working with a project pc. I have a new HD loaded with Linspire. After loading the o/s I replaced the motherboard and cpu. I now have a Biostar A780L (Didn't see it listed on the HCL) and an AMD Athalon II Multi-Core Processor. Now when the pc boots I get an error:VFS: Cannot open root device "343" or 03:43 append a correct "root" boot option Kernel panic: VFS: Unable to mount the root fs on 03:43 I tried reloading the o/s but the disk won't read from the DVD ROM. Checked my BIOS and it appears to me that it should read from the DVD ROM first but it goes to the HD and tries to load the o/s there.
View 6 Replies View Relatedcreate a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
I've tried setting SElinux to permissive mode.
Fedora 14 X64
hypervisor qemu
XML:
[code]...
I have been recording some demos from games like Quake 3, 4, and Doom 3. Now, I've been able to use Quake Video Maker in the past to take the Targa frames that the games export, and then combine those into a movie. However, it seems this time that QVM is spitting out some bad files. I try to watch the AVI file, but I just get this error message:
** Message: Error: Could not demultiplex stream.
gstavidemux.c(3526): gst_avi_demux_stream_header_pull (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/GstAviDemux:avidemux0:
pull_range flow reading header: unexpected
I figured that if I import it into Kino, then I should be able to edit just fine. Except, when I import it into Kino, the video just hangs on the first frame for the first half, and then plays the whole video at double the speed.Is there a better package that will take a lot of image files and export them into a movie file? Preferably one where I don't have to add each frame manually, as the demo I'm working with now has 5000+ frames.
We are able to stream the video fine from while the flv file is located in the /var/videos/flv folder. We have a second volume that we formatted and mounted as /media/data/videos/flv. We have changed the path in the lighttpd config file to match this. When we play the video we are receiving:200, Stream not found, NetStream.Play.StreamNotFound, clip" "[Clip]"/media/data/videos/flv/test.flv".
View 1 Replies View RelatedI have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies View Related