OpenSUSE Install :: Unable To Boot DesktopBSD Off SUSE GrUB?
Dec 22, 2010
I've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other###
title FreeBSD 8.1
rootnoverify (hd2,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: other###
title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
I suspect this is a 'new Grub' problem. I installed OpenSuse 11.2 from DVD into one (sda10) of several partitions (the others containing other operating systems):-
/dev/sda1 * 1 63 506016 6 FAT16 /dev/sda2 64 4865 38572065 5 Extended /dev/sda5 64 960 7205121 7 HPFS/NTFS /dev/sda6 961 1859 7221186 83 Linux /dev/sda7 1860 2759 7229218+ 83 Linux /dev/sda8 2760 3026 2144646 82 Linux swap / Solaris /dev/sda9 3027 3924 7213153+ 83 Linux /dev/sda10 3925 4865 7558551 83 Linux
I use NT Boot Loader for the multi-booting on the basis of chain-loading the boot sector of Linux partitions. (It is not destroyed by MS re-installations; and is actually very easy to use). I also have an older Grub shell boot floppy which can do likewise:- root (hd0,x)chainloader +1 boot FWIW I found the disc partition & boot loader parts of the installation a nightmare. Difficult to know what it is going to do; and I am sure it *did* fiddle with parts I asked it to avoid. Horribly, it did *not* make me a dedicated Suse boot floppy like I checked. (This is always the safest boot option for a new install: it leaves the present boot system intact, and provides an independant way of loading your latest. You can refine things later). I had also checked to have the boot sector on the *root partition*.
I have never been able to get into the Suse. NT Loader does not like the partition boot sector. Nor does (an older) Grub from its boot floppy. I have tried the DVD in 'system repair' mode, when it finds things wrong and corrects them, same next time... It offers a way of directly booting a selected system; that did not work.
Any suggestions? I can provide more precise error msgs, but it is tedious; and system repair from DVD dicey. I feel that *the partition boot sector is not being properly set up*.And I want to be able to make a dedicated boot floppy; how? I have an identical problem with Ubuntu, which makes me think it is related to the 'new' Grub.
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows... sda1 = Win7 system (default install) sda2 = Win7 Main (default install) sda3 = swap sda4 = Extension (I think thats what its called) sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
I have installed latest kubuntu (10.04) on sda7, ext4 , and i selected the advanced feature of the installer to install kubuntu bootloader on sda7. 11.1 is on sda5 .First , it destroyed my 11.1 grub bootloader on mbr . I managed to restore it with the 11.1 installation DVD. Now i try to boot kubuntu from the sda7 bootloader, without success . I searched the forums and tried some hints i found but found no similar problems. Here are the different entries i tried on grub (mbr) , content of the /boot/grub/menu.lst :
Code: # Modified by YaST2. Last modification on ven. juin 11 15:41:32 CEST 2010 default 0 timeout 3 gfxmenu (hd0,4)/boot/message ##YaST - activate
I was messing with some boot loaders which accidently disabled grub and I was remained with windows 7 boot loader only.How can I restore grub?I am using Opensuse 11.3
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition dev/sda2 Windows NTFS dev/sda3 Windows FAT
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
I have a poweredge t110 and am trying to install suse 11 on my server. I am getting a error 17 grub. It will not allow me to get any farther, I have three 250gb HD installed.
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
I've a multiboot machine and I recently installed Slackware64-13.1 on sda33. I added menu entry in SUSE boot loader and configured menu list as per [URL].. it returns GrUB error 15. Here is my menu list entry for Slackware -
Code:
###Don't change this comment - YaST2 identifier: Original name: other### title Slackware64-13.1 root (hd0,32) kernel /boot/vmlinuz root=/dev/sda33 ro hdd=scsi savedefault
Running 11.3 on an Acer aspire 2920 laptop. OS is up and running as are other applications. I have been trying to install a .wmv player (for CBT), (kaffeine, MPlayer, VLC) and also crossover for linux. In all cases I get "Installation of package xxxxx rpm failed".
The system downloads without problem but the issue appears to be on the actual installation side.
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa, But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code: grub root (hd0,3) setup (hd0) quit reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code: Device Boot Start End Blocks Id System /dev/sda1 1 262 2104483+ 82 Linux swap / Solaris /dev/sda2 263 13316 104856255 83 Linux /dev/sda3 * 13317 14621 10482412+ 83 Linux
i had installed linux on my 40 IDE hard disk drive now i want to install xp on then linux, but i am not able to boot any cd now, that grub problem is coming again and again.THIS IS WHAT I DID BUT COULD NOT FIND THE SOLUTION1.I formatted entire hard disk by connecting it to second computer fully formatted took me almost 1.20 minutes to format still nothing happend to that grub problemthe only way i could install xp on that 40 gb ide hd was to connect it to 2nd pc and install xp on it,but then when i connected this hd to first one i could install linux on it but xp was giving some popups windows as now the motherboard had changed on this 1st pc
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
I had mounted the pen drive then dismounted. I found out that by putting the pendrive into my sat receiver recorder with Ext3 mad the machine go crazy and I have had to sort that out before this! To say my wife was mad as hell is an understatement, but this was what I was told to do on AVForum.But now this leaves me in a predicament. I have no OpenSues booting. It goes through all the loading and then it asks me for the password with all the script showing and not the desktop. It says repair boot after this. Is there a simple way to resolve it? I think it was looking for the pendrive. Well I had to reformat that back to FAT.
Two days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in /etc/pm/config.d/00meine.config (display adapter is GForce4 nvidia with the closed source nvidia driver for accel) splash = n in /etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
