I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I am running SUSE 11.1 on a 80Gig IDE HDD, I have added a 160 SATA HDD which I wish to use as storage.
fdisk reports it as /dev/sda1 - W95 fat 32 LBA. What would the fstab entry be to make the disk mount automatically on boot, so that it shows on the desktop ready for use.
I'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,
UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedJust installed opensuse 11.2 (64-bit version) and I have a problem with the Mplayer browser plugin. Basically it comes up OK, I get the MPlayer plugin splash screen and controls exactly as expected, it downloads the media successfully (or at least looks like it does) but then doesn't play, it just reports "Stopped".
Mplayer itself works fine, it's just the browser that doesn't.
System info:
OpenSuse 11.2 (64-bit)
kernel-desktop 2.6.31.5-0.1.1-x86_64
MozillaFirefox 3.5.11-0.1.1-x86_64
mplayer 1.0rc4_r31930-1.pm.3.1-x86_64 (from packman repo)
mplayerplug-in 3.55+cvs20100124-0.pm.1.1-x86_64 (from packman repo)
I have Firefox 3.6 extracted on my desktop. I do not know how to install it.
I looked at my current firefox and can't find a way to update it.
I have 1 Pentium IV 1.7 Ghz machine with 40 gb Seagate hdd which was previously running RedHat version4. Yes very old version running squid.
I am trying to format whole hdd and installing OpenSuSe but after installing it shows booting GRUB and show L letter thats it.
I tried manually creating partitions and 2nd time automatic lay out.
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedNew Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedI have been using Open SUSE 10.3 for about a year now and have been very pleased. I am now trying Open SUSE 11, it seems good, loads a lot faster than 10.3 and seems to run a little faster. I have had a few probs but they have been resolved with help from these forums. But I have a big prob remaining and I have no idea what could cause it. For no apparent reason I will lose the connection to the net.It happens mostly when running aMule, it can be downloading fine for some while when suddenly the connection to the servers is lost and it won't reconnect, and then also I can not connect to the net with Google etc. The only way to solve it seems to be to shut down, wait awhile then reboot. It will be OK for a while then the problem re-occurs. There does not seem to be a problem with anything else on the system. I know that the Modem is OK as I have three HDD - 1 running Win XP, 2 - running Open Suse 10.3. 3 - running Open Suse 11 & the prob only occurs with SUSE 11, I do not get this problem with either of the other HDD. I have tried three versions of aMule, with SUSE 11,the one given on YAST - v2.2.2-0, & others from Packman v2.2.1-0, & vSVN, the problem occurs with each version so I think it must lie with SUSE 11. I have opened ports 4662 & 4672 on the firewall, & the setup I use is identical to the one on 10.3 which works faultlessly. I use a NTL Modem connected to the PC via Ethernet.
View 1 Replies View RelatedAnytime I open a window and then minimize it-poof it's gone! for instance when I minimize firefox or just about any other app it just disappears instead of landing into the panel as it usually does when minimized. Is this a KDE problem? I just tried to upgrade to 11.2/KDE on the net (that was a mistake.) I finally installed from Downloaded DVD (install version) and crawled back from upgrade hell.
View 3 Replies View RelatedI tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.
I am running opensuse 11.2 on my hp 2133 mini notebook, I have been having trouble connecting my broadcom 43xx internal wireless modem to my BT Home Hub, I have looked at the b43 driver that comes pre-bundled with the live dvd and understand that the driver doesnt work, I have looked at the YaST Package Search and to my horror found 50 seperate packages, from: wl-kmp desktop - wireless driver for broadcom 43xx series of chips to sta-pae kernal for 43xx series of chips? How do i know which Kernal and driver i need to get my wireless network running and which i dont?
View 3 Replies View Relatedi have openSUSE 11.1 kde 3.5
I am wondering if there is a way that i can force all windows ( konuquor ) to open the same way every time such as detailed tree view
I am running openSuse 11.1 64 bit on my hp pavilion dv6458se; and am unable to get my Broadcom wireless card to work.
i tried reading a few forums, but they all start when 'lspci' recognizes the card.
My problem is that 'lspci' does not show any 'Broadcom' card.
I have given below the output of 'lspci' for your reference.
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
All the three files I downloaded can not been played by Banshee. I got the message like below when I use search the code, so I installed all the Gstreamer I can find.
* Windows Media decoder (GStreamer, 32 bit, i586)
* Advanced Streaming Format (ASF) demuxer (GStreamer, 32 bit, i586)
During that I also did some update, but the problem still the same.
I've been trying to install OpenSuse 11.0 on my ten-year-old Gateway desktop. It has been showing this screen for approximately thirty minutes. In case you can't read it, it says 'Decompressing Linux... done. Booting the Kernel.' I booted from the CD, and the OpenSuse screen came up, and I selected 'Installation' from the menu. And here we are.
View 4 Replies View RelatedI am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View RelatedOpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies View RelatedFrom SUSE I have dl the installation DVD for SUSE 11.2 . When trying to install the system, I got the first "surprise". When the "checking your system comes, I get, in red, the following message: "unsupported combination of hardware platform X86_64 and bootloader grub. I ignored it and continue with the installation. It goes till the end and when it has to restart into new OS, there was nothing, only black screen and no keyboard. So I have to reinstall into suse 11.1. What is this and how to proceed? And yes, when I checked the DVD, it says the system on it is suse 11.3-1.21.
View 4 Replies View RelatedI am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?
View 8 Replies View Related