OpenSUSE Install :: Unable To Boot Kubuntu From 11. Grub?
Jun 11, 2010
I have installed latest kubuntu (10.04) on sda7, ext4 , and i selected the advanced feature of the installer to install kubuntu bootloader on sda7. 11.1 is on sda5 .First , it destroyed my 11.1 grub bootloader on mbr . I managed to restore it with the 11.1 installation DVD. Now i try to boot kubuntu from the sda7 bootloader, without success . I searched the forums and tried some hints i found but found no similar problems. Here are the different entries i tried on grub (mbr) , content of the /boot/grub/menu.lst :
Code:
# Modified by YaST2. Last modification on ven. juin 11 15:41:32 CEST 2010
default 0
timeout 3
gfxmenu (hd0,4)/boot/message
##YaST - activate
[Code]...
View 9 Replies
ADVERTISEMENT
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 4, 2010
I was messing with some boot loaders which accidently disabled grub and I was remained with windows 7 boot loader only.How can I restore grub?I am using Opensuse 11.3
View 8 Replies
View Related
Jul 31, 2009
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
View 9 Replies
View Related
Dec 22, 2010
I've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other###
title FreeBSD 8.1
rootnoverify (hd2,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: other###
title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
View 9 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
Mar 30, 2010
i had installed linux on my 40 IDE hard disk drive now i want to install xp on then linux, but i am not able to boot any cd now, that grub problem is coming again and again.THIS IS WHAT I DID BUT COULD NOT FIND THE SOLUTION1.I formatted entire hard disk by connecting it to second computer fully formatted took me almost 1.20 minutes to format still nothing happend to that grub problemthe only way i could install xp on that 40 gb ide hd was to connect it to 2nd pc and install xp on it,but then when i connected this hd to first one i could install linux on it but xp was giving some popups windows as now the motherboard had changed on this 1st pc
View 6 Replies
View Related
May 31, 2010
Two days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
View 2 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Dec 12, 2009
i have Windows 2000, ubuntu 9.10 and openSUSE 11.2 on my system. I am using GRUB that came with openSUSE to boot all three. It used to work fine, but my Ubuntu started messing up, so i re-installed Ubuntu. I then changed using Kwrite what i think i needed to change in order to boot Ubuntu but it will not run.
the result of fdisk -l
Code:
Disk /dev/sdb: 15.4 GB, 15364339200 bytes
255 heads, 63 sectors/track, 1867 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf5924428
[code]...
View 9 Replies
View Related
Nov 20, 2010
My system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:
sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).
I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.
View 9 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Jan 20, 2009
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
View 4 Replies
View Related
Sep 14, 2010
I want to change the image that is presented to the user when i choose operating system on startup eg back.jpg i have looked at tutorials and no luck
i am running gnome on 11.3.
View 7 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Jun 7, 2010
I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
View 5 Replies
View Related
Aug 20, 2011
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
View 9 Replies
View Related
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
May 20, 2011
I am having problems Loading OpenSUSE 11.04_amd64 after Installation. I Dual Boot with Windows (on dev/sda) and Linux (on dev/sdb). I have been using Ubuntu_amd64 for a while and had decided to give other Linux distros a try. I tried Debian but I ended up downloading and installing a bare-bone version and I couldn't go anywhere with it as, I am a Linux noob.
I have now downloaded and tried to install OpenSUSE 11.04. Installation was smooth but OpenSUSE will not boot. I get a black screen which says Grub Error and something like 'file not found'.
View 5 Replies
View Related
Apr 29, 2011
I have successfully dual booted Opensuse and Windows7 successfully, but I have to load it from the CD choosing the boot from hard drive option.
If I do not have the Opensuse CD inserted it goes to Grub Legacy and gives me the option to boot from Arch Linux, or Windows. There is no option for Opensuse and when i hit the Archl Linux option I get errors and it brings me to the /rmfa (I think) command line. Selecting Windows lets me boot to into Windows successfully.
I checked the /boot/grub/menu.list in Opensuse and everything seems to be fine, but these options do not appear on my boot loader.
View 5 Replies
View Related
Apr 5, 2011
I had my Laptop, a Dell Inspiron 1520, running Windows 7 and Windows XP - I had a few gigs of unallocated space, so I decided to install Kubuntu alongside it, worked fine no problem, with the exception of running out of space very quickly - I got fed up with it, and installed Kubuntu over the Windows XP partition (around 80gigs, and the first OS to be installed on the computer). After I installed it.
All was working perfectly until I rebooted to discover I am missing my Windows 7 boot option in GRUB, before I had to press Windows XP Embedded and it opened the boot dialog, but here I dont get the option, is there a GRUB 2 option I can change to allow it to show Windows 7? The Computer works perfectly, it's just the GRUB doesn't show Windows 7, and I'm hesitant to format its old partition and reinstall it due to the fact that it may over ride the grub and leave me without Kubuntu access?
View 1 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
Nov 27, 2009
I just did an upgrade from 11.1 to 11.2 and can not boot to OpenSUSE any more. That happened when the first reboot was starting after finishing the upgrade from the DVD. I tried to find the issue and use the repair system with no luck yet. Now I get no gfx for grub
The only thing I managed is to add the windows boot section for windows but I can not seem to boot to opensuse. device.map:
Code:
(hd1)/dev/disk/by-id/ata-ST3160815AS_5RA2LTD0
(hd2)/dev/disk/by-id/ata-ST3160815AS_5RA2LQCJ
(hd0)/dev/disk/by-id/ata-Maxtor_6L160P0_L31AHTVG
device.map.old
[Code]...
View 9 Replies
View Related
Dec 4, 2009
I have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said
splash=silent
and
quiet showopts
I was wondering what they meant?
View 2 Replies
View Related
Jan 20, 2010
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
View 7 Replies
View Related
Jan 28, 2010
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
View 7 Replies
View Related
Mar 28, 2010
i was wondering if anyone knew how to make a Grub network boot cd. I would like to run openSUSE off of my server and not on my hard drive because i don't have a lot of space for the linux partitions.
View 7 Replies
View Related
Jun 21, 2010
After giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
View 7 Replies
View Related
