OpenSUSE Install :: SUSE 11.3 Only 1st Time After Boot Hibernate?
Apr 13, 2011
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
Trying to install on a: Dell Precision T3500 OpenSuse 11.3 keeps showing the following message:
"Make sure CD number 1 is in your drive"
I ordered the DVD from the OpenSuse site, so they ARE NOT burned copies. I also tried burning images, the same problem happens. No matter what I do, it does not go beyond this message.
Whenever I try to use a preload ISO from susestudio.com, it takes me about 5 tries to actually get it to install. I load it up in VirtualBox, and on the screen that warns "you are about to erase all data on /dev/sda, continue?", selecting "yes" will 80% of the time cause it to think you cancelled and waits 30 seconds before rebooting. Every now and then it decides to work, but sadly that's the exception and not the rule. If it makes any difference, the appliance I'm downloading is a custom one based on openSUSE 11.4 Minimal X with GNOME 3 installed on top of it.
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa, But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
I had mounted the pen drive then dismounted. I found out that by putting the pendrive into my sat receiver recorder with Ext3 mad the machine go crazy and I have had to sort that out before this! To say my wife was mad as hell is an understatement, but this was what I was told to do on AVForum.But now this leaves me in a predicament. I have no OpenSues booting. It goes through all the loading and then it asks me for the password with all the script showing and not the desktop. It says repair boot after this. Is there a simple way to resolve it? I think it was looking for the pendrive. Well I had to reformat that back to FAT.
I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
I was a window vista user. I wanted to install suse into my laptop so i shirk a free partition (around 70-80GB free partition) to install suse.After I had installed suse, I found out that I fail to boot my window vista operation system. It had gave me several choices...
I've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other### title FreeBSD 8.1 rootnoverify (hd2,0) chainloader +1 ###Don't change this comment - YaST2 identifier: Original name: other### title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
I have SUSE 11.3 on an Acer Aspire 3620 (laptop). When it boots up, it gets stuck and doesn't complete the process. Can't use safe boot either because I can't get past the login- when I type the password, no keystrokes appear, regardless of the key I strike. Here's how I got into this situation and a little more description of the problem. After my laptop got some nasty bugs that damaged Windows XP so badly that I couldn't use the rescue disk (that I so obediently made per instructions), I bought several linux flavors on Live CD/DVD and decided to go with SUSE. I had been using the Live DVD for about a month and everything worked well so I installed it last weekend (SUSE only -no dual operating system). Everything went well for a couple of days and I even used Yast to get Adobe Flash. Then I plugged in my MP3 Player to recharge it and quirky things started happening.
Once, the computer went in to standby and I couldn't get to the login screen - I started pushing all the keys and something worked. That evening I closed the laptop (so it should have gone to suspend) with the MP3 player attached still, and pulled it out, probably as the computer was going through the motions or shortly thereafter. (My player and usb stick suffer no ill consequences if not ejected properly.) Since then I have not been able to boot up. I powered down several times and tried. It seems to start normally with the green screen and little reptile appearing as the monitoring bar grows. Then it goes black, except the cursor's spinning wheel indicating activity. Then comes back to the green screen, with the bar still increasing and nearly making it to completion. Then the black screen and cursor-- forever. Eventually I can hear that the harddrive is no longer spinning.
Also, when the black screen appears, there is an error message that says that the configuration settings for Gnome Power Manager were not installed properly, which I highly doubt since I had no trouble in the installation, but maybe that is pointing the right direction to the problem. Anyway, now I am back to Live DVD, so that I can surf for the answer to this problem. Least that works! Before installing, when I was using SUSE as a live DVD, it sometimes was a little quirky when I inserted the MP3 Player and USB Stick- sometimes wouldn't recognize them, sometimes would, sometimes wouldn't/couldn't unmount. Firefox also would start crashing after alot of use, but I could reboot and things were fine, so I thought this might just be due to the fact that it was Live and not Installed.
I installed it with the default, KDE. I read another post somewhere with a similar problem in which the author says KDE is very bad with inserted media but I wouldn't know if that's true or not. This is the first time I've used linux, apart from a little bit of experience at work. It really has it's ups and downs, when it was working, it was so exciting, when I got hung up so soon, disappointing. The only thing I can think of to do now is reinstall and tip-toe around being extra careful about the quirks when connecting devices. Not very practical though. Thanks for listening to this long story. Will be trying to get it fixed in the evenings after work EST.
PS IF you can bear to read another line. The live DVD I bought was rather badly scratched and scuffed in my opinion. Although there were no installation errors that I could see, would this have had an unknown immeasurable effect that could account for weird behavior?
I'm planning to migrate from ubuntu server to open suse serverI'm testing the migration in a virtual machine and I'm having problems with mdadmEvery time Open suse boots I need to run mdadm --assemble /dev/md0 and activate the volume group vgchange -ay VGNAMEDuring the boot time boot.md and mdadmd are running but (startup scripts only scan) I believe mdmad is not running because needs to be assemble every time.
Are there any easy special tricks to speed up the boot time?Coming from Linux Mint (GNOME), I could get to the Desktop from cold in less than 25 secs.Now in openSuse 11.3 (KDE4.5) it takes more than twice that.Is this a function of KDE or have Ubuntu done something that openSuse hasn't to speed up the boot?
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
I just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
I suspect this is a 'new Grub' problem. I installed OpenSuse 11.2 from DVD into one (sda10) of several partitions (the others containing other operating systems):-
/dev/sda1 * 1 63 506016 6 FAT16 /dev/sda2 64 4865 38572065 5 Extended /dev/sda5 64 960 7205121 7 HPFS/NTFS /dev/sda6 961 1859 7221186 83 Linux /dev/sda7 1860 2759 7229218+ 83 Linux /dev/sda8 2760 3026 2144646 82 Linux swap / Solaris /dev/sda9 3027 3924 7213153+ 83 Linux /dev/sda10 3925 4865 7558551 83 Linux
I use NT Boot Loader for the multi-booting on the basis of chain-loading the boot sector of Linux partitions. (It is not destroyed by MS re-installations; and is actually very easy to use). I also have an older Grub shell boot floppy which can do likewise:- root (hd0,x)chainloader +1 boot FWIW I found the disc partition & boot loader parts of the installation a nightmare. Difficult to know what it is going to do; and I am sure it *did* fiddle with parts I asked it to avoid. Horribly, it did *not* make me a dedicated Suse boot floppy like I checked. (This is always the safest boot option for a new install: it leaves the present boot system intact, and provides an independant way of loading your latest. You can refine things later). I had also checked to have the boot sector on the *root partition*.
I have never been able to get into the Suse. NT Loader does not like the partition boot sector. Nor does (an older) Grub from its boot floppy. I have tried the DVD in 'system repair' mode, when it finds things wrong and corrects them, same next time... It offers a way of directly booting a selected system; that did not work.
Any suggestions? I can provide more precise error msgs, but it is tedious; and system repair from DVD dicey. I feel that *the partition boot sector is not being properly set up*.And I want to be able to make a dedicated boot floppy; how? I have an identical problem with Ubuntu, which makes me think it is related to the 'new' Grub.
for any reason after installation system hangs up and nothing happens, i�m newbie about linux, maybe the problem is the RAID 1 configuration of the disks. The machine is a R710 Server:
2 x Xeon E5520 4 x 2 GB Memory 4 X 750 GB SATA 7200 3.5" disk PERC 6/i Raid controller
i have 2 partitions on dmraid. I am not able to configure them to mount with yast; yast partitioner gives an error stating that it can't mount a file system of unknown type. I am able to start the dmraid devices manually and mount them manually.
See bug:
https://bugzilla.novell.com/show_bug.cgi?id=619796 for more detailed info.
For some reason, every time I shut down and reboot my machine, the system time advances four hours. The local time here is EDT (-4hrs UTC). I have it set correctly in Yast and have the 'hardware clock is set to UTC' checked. However, for some reason, the next time I boot, the system time will be ahead four hours.
i have just installed opensuse 11.3 on a pc which was once a Windows XP,the configuration for opensuse installation well everything is good.The problem is when i switch off or reboot the pc,.at the 1er black screen where u see the 'boot' its says
Verifying DMI Pool Data........Update Success (take 2mins almost then) GRUB Loading stage 2...... (takes up to 10mins or more)
then i got this:
root (hd0,1) Filesystem type is ext2fs,partition type 0x85 kernel /boot/vmlinuz -2.6.34.7-0.4-desktop root=/dev/disk/by-id/ata-HDS728080PL
Though my upgrade from 11.3 to 11.4 went pretty well (X and apparmor/samba config to renew), I have a bunch of warnings at boot time. Sample: "* wil be removed in a future UDEV version..." On another box, I get some "/etc/*/ipv6" should have a .conf file. Should I worry / fix up something before next upgrade?
