OpenSUSE Install :: How To Get Back Suse Boot Loader
Aug 2, 2011
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
View 1 Replies
ADVERTISEMENT
Apr 28, 2010
Main reason I am using openSUSE currently is because my Windows system's went bad. I haven't been able to easily restore and will probably have to do clean windows install. I want to make sure my entire openSuse system (application/OS setting/etc) backup so I can easily restore of it fast. Since this type of back takes awhile, I would preferably like do this while I am still logged into SUSE. I am where to disk cloning thing like clonezilla, but looks like I would need turn of my system entirely to get this done.
Currently my SUSE root and home are in a partition with another NTFS partition on my hard drive. I really don't want to use 'dd' to clone the entire hard disk. I would much rather store of required partitions in other locations. Hopefully, there is easy to get this done without too much of effort and time.
View 6 Replies
View Related
May 28, 2010
I'm running Suse 9 service pack 2. I have the recovery cd in the system and have issued the following command /sbin/mkinitrd -m "reiserfs aacraid mptscsih jbd ext3" -b /tmp/kevin/boot -d /dev/sda2
They system responded with : Root Device: /dev/sda2 (mounted on / as reiserfs) Module List: reiserfs aacraid mptscsih jbd ext3 You may have to update your boot loader configuration QUESTION: How do I update the boot loader from the where I am now?
Note: the reason that I need the bott information is because during maintenance the module reiserfs was left out the kernel file when the a previous mkiniterd command was issued cuasing /dev/sda2 not to mount and the system to go into a kernel panic.
View 1 Replies
View Related
Dec 1, 2009
Why does my boot loader(GRUB)graphic randomly change to penguins playing on ice.
View 3 Replies
View Related
Feb 18, 2010
I had installed Win Xp on my first physical partition, and SuSe on Second partition now i formated the Xp and the GRUB is vanished from MBR i want to rload it . i tried it using Rescue System but still Show error msg. "cannot load OS" on booting. tried to install and using repair option i selected MBR field . but not working ..
View 1 Replies
View Related
Jul 15, 2010
I'm trying to make my iMac "Triple Boot".But using rEFIt as the boot loader, and installing Grub or Lilo makes the "Boot Menu" complicated.
"SO, DO YOU THINK IT'S A GOOD IDEA NOT TO INSTALL "GRUB, LILO, OR OTHER BOOT LOADERS", and just let rEFIt to do the job?
View 4 Replies
View Related
Aug 25, 2010
I have had to reinstall SuSE 11.2. After its successful completion it got into a strange situation: the boot loader identified a boot record on the hard drive and displayed the appropriate message on the screen - but then nothing happened. When I restarted the system with the live CD and chose "boot from hard drive" it got to the normal boot menu without difficulty. I have no idea why the second method succeeds while the first fails
View 3 Replies
View Related
Aug 20, 2011
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
View 9 Replies
View Related
Apr 29, 2010
I'm running SuSE 11.2, dual booted with Windows 7. SuSE installed fine, but when I rebooted, it went straight to windows and didn't give me the option of booting into SuSE. I reinstalled SuSE and went into the boot settings in Yast. When I rebooted, neither Windows nor SuSe would boot. I ran a system repair from the SuSE disk, at the boot loader settings, it displays the SuSE Linux partition and the Failsafe Linux recovery partition. I did not format any drives in the system repair. How do I add the Windows partition to the boot loader settings?
View 1 Replies
View Related
Aug 27, 2011
I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
View 6 Replies
View Related
Mar 19, 2011
Have 3 linux distros on 3 hard drives. lost one distro from boot loader. how do I restore missing distro to boot loader? drive was not written to when one distro (drive) was updated.Example drives a, b, and c each had listing on boot loader, now after upgrade to distro on drive b order on boot loader is drive b then a and none for c.
View 5 Replies
View Related
Nov 19, 2010
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
View 9 Replies
View Related
Mar 21, 2011
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
View 1 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Oct 25, 2010
I let a 'friend' use my laptop over the weekend. Now when I turn it on, it loads the BIOS details, then says no active partition, then no OS cannot be found.
It looks like they have deleted the partition with SuSE with the Grub Loader.
I cannot load up SuSE or Windows 7!
Any ideas on how to recover the boot to load Windows 7?
I have tried using the Windows 7 install disc to repair - but it does not recognise that Windows is installed and wants to do a clean install only.
Is it worth trying to reinstall SuSE and hope it detects Windows on the other partition? (I assume it is still there!)
I cannot get to a command prompt.
View 5 Replies
View Related
Jun 11, 2011
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
View 6 Replies
View Related
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
View 1 Replies
View Related
Nov 1, 2010
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies
View Related
May 19, 2011
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jun 14, 2010
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
Jan 24, 2011
I had mounted the pen drive then dismounted. I found out that by putting the pendrive into my sat receiver recorder with Ext3 mad the machine go crazy and I have had to sort that out before this! To say my wife was mad as hell is an understatement, but this was what I was told to do on AVForum.But now this leaves me in a predicament. I have no OpenSues booting. It goes through all the loading and then it asks me for the password with all the script showing and not the desktop. It says repair boot after this. Is there a simple way to resolve it? I think it was looking for the pendrive. Well I had to reformat that back to FAT.
View 5 Replies
View Related
Aug 17, 2010
I just today installed OpenSUSE 11.0 on an empty drive I had (320GB) and I had Ubuntu 10.04 on another 500 GB drive, and I have now lost my GRUB menu.
Below is the output from FDISK. how to modify bootloader?
I'd prefer to boot from the OpenSUSE side and just have Ubuntu as an option.
Ubuntu (which is on sda drive) along with OpenSUSE 11.0 (which is on sdb drive):
View 5 Replies
View Related
Jan 29, 2011
I lost boot option for Opensuse. I am sure it is still installed, only thing I want to know is how to bring the boot option back. I had duel boot option for vista and opensuse now after switching on vista starts by default and I am not having any option for choosing one of them as I had before.
View 9 Replies
View Related
May 23, 2010
I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies
View Related
Oct 27, 2010
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
View 9 Replies
View Related
Apr 13, 2011
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
View 8 Replies
View Related
Jan 11, 2010
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
View 9 Replies
View Related
Jan 30, 2010
how to make suse prompt for a login when I first boot up. It never asks for my password and boots directly into kde.
View 4 Replies
View Related
