I've setup a dualboot-system. SUSE 11.2 starts automatically and works well all the time.
But when I want to use XP (yeah, sometimes I do that...), in about 40% of all cases it won't be loaded when chosen in GRUB. Just a black screen without anything else.Then I need to restart and in the 2nd trial it works!
I've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other###
title FreeBSD 8.1
rootnoverify (hd2,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: other###
title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
my dualboot grub is not working properly. I have it set to start opensuse/W7, but when I start windows, I get an error message that the bootmgr is not working, and that I should press ctrl/alt/del/ to reboot.
View 5 Replies View RelatedI am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
[code]....
I was running Ubuntu 11.04 next to Windows 7 but lost my DualBoot after re-installing my Windows 7 using a backup image. The Ubuntu Partition (/dev/sdb5) is unchanged. Windows 7 comes with a default Bootmanager Partition (dev/sdb1) in size of 105MB. Here my system (2 Harddisks)
[code]...
I'm doing custom minimal OpenSUSE installation and trying to export detailed list of chosen software in yast on USB (FAT32) drive, but cannot locate the drive itself. It definitely is recognized by SUSE, since i can see it in partitioning section, but after that i just can't find it in yast (mnt, media,...).Is there any other way to mount/recognize the drive, because i just don't have any other idea how to backup that chosen software list?
View 8 Replies View RelatedI have a poweredge t110 and am trying to install suse 11 on my server. I am getting a error 17 grub. It will not allow me to get any farther, I have three 250gb HD installed.
View 1 Replies View RelatedBefore installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
[Code]...
adding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]......
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
Running 11.3 on an Acer aspire 2920 laptop. OS is up and running as are other applications. I have been trying to install a .wmv player (for CBT), (kaffeine, MPlayer, VLC) and also crossover for linux. In all cases I get "Installation of package xxxxx rpm failed".
The system downloads without problem but the issue appears to be on the actual installation side.
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedWith the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I suspect this is a 'new Grub' problem. I installed OpenSuse 11.2 from DVD into one (sda10) of several partitions (the others containing other operating systems):-
/dev/sda1 * 1 63 506016 6 FAT16
/dev/sda2 64 4865 38572065 5 Extended
/dev/sda5 64 960 7205121 7 HPFS/NTFS
/dev/sda6 961 1859 7221186 83 Linux
/dev/sda7 1860 2759 7229218+ 83 Linux
/dev/sda8 2760 3026 2144646 82 Linux swap / Solaris
/dev/sda9 3027 3924 7213153+ 83 Linux
/dev/sda10 3925 4865 7558551 83 Linux
I use NT Boot Loader for the multi-booting on the basis of chain-loading the boot sector of Linux partitions. (It is not destroyed by MS re-installations; and is actually very easy to use). I also have an older Grub shell boot floppy which can do likewise:- root (hd0,x)chainloader +1 boot FWIW I found the disc partition & boot loader parts of the installation a nightmare. Difficult to know what it is going to do; and I am sure it *did* fiddle with parts I asked it to avoid. Horribly, it did *not* make me a dedicated Suse boot floppy like I checked. (This is always the safest boot option for a new install: it leaves the present boot system intact, and provides an independant way of loading your latest. You can refine things later). I had also checked to have the boot sector on the *root partition*.
I have never been able to get into the Suse. NT Loader does not like the partition boot sector. Nor does (an older) Grub from its boot floppy. I have tried the DVD in 'system repair' mode, when it finds things wrong and corrects them, same next time... It offers a way of directly booting a selected system; that did not work.
Any suggestions? I can provide more precise error msgs, but it is tedious; and system repair from DVD dicey. I feel that *the partition boot sector is not being properly set up*.And I want to be able to make a dedicated boot floppy; how? I have an identical problem with Ubuntu, which makes me think it is related to the 'new' Grub.
My soundcard seems to have problems working with a certain game in windows xp so I decided to create a different installation of windows xp to use with onboard sound drivers instead. I had a backup of my clean current install on a dvd, so thought I would use this to speed up the procedure. I have two hard drives - the sata has my normal windows boot on and my ext4 ubuntu installation. The id drive has only files on. So I decided to shrink the partion on the ide drive using gparted and then create a new primary partition. I then installed my backup to this newly created partition.
At first it did not appear in the boot manager. Then I did a sudo update-grub and it now does, however whichever windows installation I now select from the grub, it always seems to boot into the same (old) installation, rather than the new one I installed from a backup. How I can actually get it to boot into this new installation? It might be due to windows boot ini settings or disc / partition flags or whatever, as I tried fiddling with those.
i have Windows 2000, ubuntu 9.10 and openSUSE 11.2 on my system. I am using GRUB that came with openSUSE to boot all three. It used to work fine, but my Ubuntu started messing up, so i re-installed Ubuntu. I then changed using Kwrite what i think i needed to change in order to boot Ubuntu but it will not run.
the result of fdisk -l
Code:
Disk /dev/sdb: 15.4 GB, 15364339200 bytes
255 heads, 63 sectors/track, 1867 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf5924428
[code]...
How to install openSUSE with Ubuntu in dualboot? I have Ubuntu 10.04 and i want to install openSUSE 11.2 without losing any data on hard disk.
View 4 Replies View RelatedI tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.
I have installed latest kubuntu (10.04) on sda7, ext4 , and i selected the advanced feature of the installer to install kubuntu bootloader on sda7. 11.1 is on sda5 .First , it destroyed my 11.1 grub bootloader on mbr . I managed to restore it with the 11.1 installation DVD. Now i try to boot kubuntu from the sda7 bootloader, without success . I searched the forums and tried some hints i found but found no similar problems. Here are the different entries i tried on grub (mbr) , content of the /boot/grub/menu.lst :
Code:
# Modified by YaST2. Last modification on ven. juin 11 15:41:32 CEST 2010
default 0
timeout 3
gfxmenu (hd0,4)/boot/message
##YaST - activate
[Code]...
I was messing with some boot loaders which accidently disabled grub and I was remained with windows 7 boot loader only.How can I restore grub?I am using Opensuse 11.3
View 8 Replies View RelatedA few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
I want to change the image that is presented to the user when i choose operating system on startup eg back.jpg i have looked at tutorials and no luck
i am running gnome on 11.3.
I just tried a dual installation. Win7 sits on my internal HDD, Ubuntu has a partition on my external HDD. The external Hdd is set up to have ~900GB of NTFS file storage and ~100GB for / (ext4) and a seperate swap partition. I partitioned it that way from the livecd installer. I have to say that I'm basically fresh out of ideas. I can boot Ubuntu 9.10 64bit just fine from a Usb stick. Installation also worked fine, I had the installer install Grub on the external Hdd. I am quite sure that it actually *is* on the external hdd, since unplugging it as well as changing the boot order to internal hdd first results in a straight boot to Win7.
Anyways, booting from the external device, I get as far as the grub OS selection prompt. Windows 7s loader can be started without any problem from here. However, choosing Ubuntu (recovery or not) results in... nothing. The system plain simply freezes up (I gave it some time) and can only be reactivated by resetting it. So far, I tried manually editing the boot entry by pressing "e". I changed the root entry from 2,2 to 2,0 to 2,1 to 2,3 and 2,5. Afterwards I tried booting by pressing ctrl+x. The result always stays the same. No boot, frozen system. Pc: C2D E6750, Gf8800GT,4GB Ram. Pastebin of grub.cfg: [URL]
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
I have a dualboot system with Ubuntu and Windows 7 (grub bootloader). I updated the firmware in my HD, and now grub doesn't work. After POST, instead of getting the menu of OS options, I get "Non-system disk: press any key."After pressing a key, I get the Windows 7 loader, with only a Windows 7 OS option. Windows 7 boots fine, but I have no way to boot into Ubuntu.
View 9 Replies View RelatedI have recently installed OpenSuse with GRUB boot-loader on my Vaio FW series laptop. I had to uninstall it because it caused Windows 7 to be unable to hibernate. I installed other distros (Fedora 11 and others) and the same problem recurred. This lead me to the conclusion that the problem is with the boot-loader (as my research suggested)..It has been months now, and I have not found any proper solutions to this yet. Linking this to Ubuntu, I recently downloaded and burned Ubuntu 10.04 LTS, however, I am still reluctant to install it until I know a solution is available. Has anyone had Linux-Windows 7 dualboot and also faced problems with hibernation/stand-by?
View 3 Replies View RelatedI am trying to install 11.2 on a system with RAID-1 /boot partition and RAID-10 /(root) partition. I have done this before with 10.3 but am hitting a wall with 11.2. In particular, the boot image loads and then halts when it tries to load the RAID-10 root partition saying that the personality is not laoded. modprobe shows that the raid10 module does not appear to be part of the boot image. I cannot find anything in the installation that will allow me to specify a module to include in the init image. How do I tell the installer to include an additional module?
View 3 Replies View RelatedI tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
I am having dual boot system Opensuse 11.1 and Windows vista. I have allotted about 5 GB space to home partition. Now sometimes I copy/move files from Windows partitions to /home, this is easily done. But when I restart the computer, It hangs and KDE is not loaded giving reason that disk is out of space. I have to work on commandline and delete some files from /home to free some space,only then I can restart the computer normally. This is very annoying.When I copy/move files then Opensuse should immediately give me a warning.It seems nonsense to not start kde.
View 6 Replies View Related