OpenSUSE Install :: Can't Boot Into SuSE (Dual Boot With Win7)?
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time) 2. Installed OpenSUSE using default partition options. 3. Booted into OpenSUSE with no problem 4. Tried booting into Windows, no joy. 5. Got that figured out, now I can get into Windows. 6. GRUB is gone, so now I can't get back into OpenSUSE.
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
Athlon 64 2800 2 GB RAM 340 GB on two HDD Ubuntu 10.04 LTS Win XP Pro SP3
After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.
I installed ubuntu 11.04 to my Compaq Presario CQ61-402SA (Dual boot with windows 7 Home premium 64-bit, Via a partition) And now I can't get back to my W7! Disk Utility says that it is "unallocated"! It had lot's of important info on it! Sorry for urgency, but it's important I get this OS and files back, intact.
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement 147 GB for Windows, C: 85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).
Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.
So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.
i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now
I've installed Ubuntu 10.10 (64bit) next to my Windows 7, in SSD hard drive. I'm able to boot Ubuntu with no problem, but my problem is my Windows. When I try to enter windows 7, all I get is a black screen with one blink char, and from there it does nothing...
I have the option of selecting between win7 and Ubuntu during start up, but when i select Ubuntu it goes to the first 2 lines of command and then restarts again. Windows 7 works fine. This is the second installation of ubuntu on this computer, the first attempt did the same thing (would not boot into ubuntu but win was fine) after i lost power. This time i shut the computer off for a full week while i was on vacation. I have switched between windows and ubuntu a couple of times and had no issue with this installation.
HP Pavilion AMD AthalonII X4 8GB ram 1TB HD AMD HD 4550
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
There is no prompt for choosing whether I boot windows or Linux it just takes me to Linux. I need to install and load some things from windows and can't figure it out.
how to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
asus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
I'm used to be a Ubuntu user at first,and using its Grub loader so far.Several moths later,I just find that may be Opensuse is another good choice.So I installed Opensuse 11.3 without grub using KDE Livecd version because it cant find the Ubuntu partition while the install process,but the install application can find Win7 installed in my laptop.Soon I logined to Ubuntu and Updated the grub settings in Ubuntu.This grub program in Ubuntu found that there's a Opensuse 11.3 on a partition. So I can login to SUSE by Ubuntu's Grub.But Now I want to use SUSE its own Grub.So what should I do to change my default Grub Loader from Ubuntu's to SUSE's?
I want to dual boot with windows 7. How would I go about making a partition etc.,. for windows? I know how to dual boot other OS's off of windows but not linux. I just want to dual boot with ubuntu and windows 7.
My wife wants Ubuntu dual booted on her new Acer laptop which has Windows 7. My question: Is 10.10 stable enough to put on her computer? We have used Ubuntu for a number of years and have always stayed current with upgrades, but I have become leery lately of rushing into new versions of Ubuntu. I had too many problems when I upgraded to the last couple of times. I'm inclined to put 10.04 on her computer unless I can be assured that 10.10 is good to go. Or would I be well-advised to move back a version or two?
I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.
troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.
I installed fedora aside of windows 7 home premium 64 so I can choose which one to star. But its always fedora I set bios to boot from the cd drive and yes it ask me hit any key to boot from the cd so I can reinstall windows 7 but it's fedora again. It happens the same with the USB drive. I think I don't need to reinstall Win7, it's there in Hard Disk. I am new in Fedora (infact I installed Fedora today in the morning).
I bought a new computer (laptop HP DV6-1375dx) and I want to set a dual boot with win7, like I did with my desktop (clean install) However, my question is, with the new laptop all I have is the rescue disks vs. having the single OEM version. IS that a problem? for the desktop I followed lifehackers article "Dual boot win7 and ubuntu in perfect harmony." no problems at all.
what I am afraid of is formatting the new hard drive and the recovery partition and not being able to use the disks for some reason....am I over-reacting?
Currently i am dual boot win7 and ubuntu, and the win7 is installed first in C drive, then ubuntu 10.04 is installed in D drive, my question is can i uninstall win7 and just keep the ubuntu on my machine?
There was windows 7 Home Basic pre installed onto Hcl Desktop at my Office, then I installed ubuntu 10.04 to it, everything was ok untill I restarted. When I select windows 7 from dual boot, it takes me back to dual boot grub page. So I did inserted Windows 7 cd and restored windows by this
Code: bootrec.exe /fixboot
Now only windows 7 is working and booting. I want ubuntu 10.04 on the dual boot, how and what is exact method of recovering ubuntu without harming windows 7? Is it with ubuntu 10/04 cd?? If i do live cd and restore grub, will windows 7 work?? I haven't given any details of hd0 and root, i'll manage, just tell the procedure.
