I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 RepliesToday I've decided that I would like to remove my useless, freezing windows install from my Ubuntu laptop and only use Ubuntu... booting windows XP from a virtual box whenever I need to use a Windows application with poor Wine support. Any safe way I can go about doing that? I tried googling this, but all I found was the opposite, remove ubuntu from windows... which is quite sad. Anyway, windows is using up a ton of space that it doesn't need to. It takes me 5 minutes to even get it booted and after using Ubuntu, I have no patience left for the program. What should I do?
View 8 Replies View RelatedI have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies View RelatedBeen trying this by the guess and error method for days.I know about the "Swerdna" post but it is way to difficult for me.I do this every other output from Microsoft, so it is very difficult to rememberwhat transpired. Bedsides it changes with each new distro.I'm tempted to use the VM program that Dedoimodo recommended but I don't knowhow it handles Email and urls. If they are permanent or not.
Setup:
HD1 - Vista - sda
HD2 - Opensuse 11.2 - No boot to MBR - sdb
[code]....
i have openSUSE 11.3 as my primary OS. and i want to be able to dual boot windows vista. from what i read i would have to reinstall the 11.3 to set up to dual boot. i may have that wrong.
View 2 Replies View RelatedI tried a lot of distros and the one who i liked was openSUSE, I really liked it! And now I want to install openSUSE in my PC, but, there's two problems.
1- I need to keep Windows Vista, because i am the only onein my house who knows how to use a linux (at least, use a little bit, hehe).
2- I don't know how to make a dual boot with Vista and openSUSE.
I want a tutorial showing me how to make the Dual Boot (Windows Vista x openSUSE), and, if possible, with screenshots.
My Laptop runs on Windows vista.And I just downloaded Opensuse 11.4 KDE in want to Dual Boot So I first Created around 25GB of Unallocated Space Using Disk Management in Vista and Ran SUSE live from a CDROM But i cant seem to understand the disk partition and where suse will be installed.I want to install suse only in my unallocated space.How come other distros automatically detect unallocated space.Please help.Used to tun linux virtually but i thought i'll dual boot it
View 2 Replies View RelatedIs there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 Replies View Relatedit's my first time to try openSuse, i want to dual boot openSuse with windows vista home premium. anyone can tell me how to dual boot openSuse 11.2 with main os windows vista step by step start from partition harddisk which use by opensuse, and how to set the grub.
View 2 Replies View RelatedI would like to create a dual boot Opensuse/Vista laptop. My problem is I do not have a DVD-RW drive, and I am not that good with creating a bootable USB stick. I have read some of the installation guides offered here and attempted to install Opensuse via my USB stick without success. My question is there a setup.exe download offered for Vista users who would like to create a dual boot laptops? I have an 8Gb USB stick that was made "bootable" via some other forums, and I have downloaded the DVD ISO image of Opensuse 11.2 to my desktop.
View 5 Replies View RelatedI've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
This is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
can someone direct me how to install Ubuntu as a dual boot on my open suse 11.2 I could not find any installing instructions. if someone could give me a link or direct me ,
View 5 Replies View RelatedHere the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies View Relatedupgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies View RelatedI want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
I've installed FreeBSD (sdc1) and DesktopBSD (sdc4). When I try to boot DesktopBSD it boots FreeBSD.here is menu.lst
###Don't change this comment - YaST2 identifier: Original name: other###
title FreeBSD 8.1
rootnoverify (hd2,0)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: other###
title DesktopBSD-1.7-amd64
[Code]...
I guess the chainloader boots 1st ufs slice and ignores the other. I've installed GrUB in FreeBSD and when I try to boot with different menu 'configfile /boot/grub/menu.lst' it returns error 17. This is probably due to inability reading ufs.
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
I resized my windows c drive to make another drive which also has Open SUSE 11.4 dual booting which was working fine.
After reboot I get missing operating system so I boot the live Opensuse DVD and the windows and Linux is still there so I tried the boot configure tool in YAST but get the error because of partitioning the boot loader cannot be installed properly
Can I make a boot floppy somehow? I now have a grub menu when it boot sup but do not know what to do now
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit