OpenSUSE Install :: 11.3 Virtual Machine Through Xen - Error "device 0 Vif Could Not Be Connected Opensuse....."
Jan 10, 2011
I am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
All I do is connect my Palm to the usb port, and it starts a reset loop. It resets, gets booted, and crashes to reset again. What's up with this? BTW, this same palm worked with gnome pilot on Debian and Vector installs, and works currently with an XP install. But on my 11.2 suse, it goes crazy.
My old Creative Zen MP3 player has just gone titsup - it's gone into recovery mode and attempts to reload the firmware come up with device not connected errors (even under Windoze XP) So I'm looking around for a replacement and the Cowon D2 looks good as it takes SD cards like the zen (and I'd just bought 2 new 8Gb cards). The Zen used mtpfs which worked under linux but not well an I believe the D2 just connects as USB memory. Anyone out there using a Cowon D2 under Linux?
I had left a small windows partition for some programs like MS Office, (I'd failed to install it with wine :-( ) so I was dual booting OpenSUSE 11.3 & Vista. When I decided to replace Vista with Win 7, the grub was missing, I formated the Vista partition, then tried to boot into SUSE before installing win 7. there was some command line, that i tried the instructions I had found on the forums so I typed
grub find /boot/grub/menu.lst and I got (hd0,1) so I root (hd0,1)
[code]....
I got an error about missing (hd0,1), when I pressed enter I got a menu not the one I was used to. When I chose to boot OpenSUSE 11.2 or the failsafe I got error 17 "cannot mount partition" so found a bit of assistance from the following page: How to fix GRUB after Windows breaks it, and how to edit the GRUB menu - Super User when I press "e" and change root (hd0,1) to (hd0,2) then boot by pressing b, I get the usual SUSE boot screen, then the bootup process stops with some text displayed on the screen. there was a lot of text but the following is what I jotted down: the superblock could not be read or does not describe a correct ext2.
superblock corrupt e2fsck with an alternative superblock e2fsck -b 8193 fsck failed. Mounting root device read-only
I have been unable to create any type of Windows VM in Xen. Every time it tells me that the processor(s) in the machine do not support full virtualization. After some research, I found several articles regarding the vmx setting in /proc/cpuinfo not showing up when the xen kernel is booted versus it showing up in the default kernel. Of course, I am not seeing the vmx extension in /proc/cpuinfo after I boot to the xen kernel. In the other posts where other people are in the same situation, the only resolution is to upgrade to the 2.6.16 xen kernel. I am already past that:
linux-vxke:~ # uname -r 2.6.31.8-0.1-xen
yet I am still unable to create any form of Windows VM. I have even seen that some people are able to create a partially virtualized Windows VM, and they report that the message is only a warning. However, I am unable to get past this message. I am running a Dell Optiplex 760 with an Intel Core 2 Duo E7300, and I have the VT-x setting enabled in the BIOS. Has anyone else seen this situation or have any thoughts on why this is happening?
I ma new in OpenSuSe and I want to create virtual Machine using the graphical interface Xen of Opensuse 11. I did'nt find a good tutorial ton use it or a gut getting started with xen in Opensuse.
I have 3 boxes running opensuse-11.4 64 bit - Phenom-I 2.6 GHz, Intel Q9400 quad core 2.66 GHz and Intel SU7300 dual core 1.3 GHz (the last one is a laptop). When I run a KVM virtual machine and load it quite a lot all host OS freeze. Interestingly, the laptop works the longest (hours), while the fastest system with Q9400 freezes in max. 10 minutes. After a hard reboot there is nothing in /var/log/messages This bug is 100% reproducible. The guest OS is either RHEL or openSUSE. Is it a 11.4 bug or I am missing something? Have not tried the same hardware with RHEL-6.
I have CentOS 5.5 and try to create KVM virtual machine with CentOS 5.5 as a guest. But when I exec command: virt-install --connect qemu:///system --name test --ram 1024 --file=/var/lib/libvirt/images/test.img --file-size=10 --vnc --cdrom=/var/lib/libvirt/images/CentOS-5.5-x86_64-bin-DVD-1of2.iso --vncport=10000 --accelerate --os-type=linux --nonsparse --livecd --hvm
I have OpenSuse 11.3 with VirtualBox on it, and with installed Oracle DB (on host OS).. but, sometimes this computer is disconnected, without it's gateway (adsl router)... and in that case, I cannot ping from virtual OS to host OS, or another virtual OS. I tried to use 'Host only' option within VirtualBox, but it doesn't work. What should I do? It seems that virtual machines requires some kind of gateway/router, but since machine is disconnected, it's not working.. how could I fix it?
Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
I have installed virtualbox on opensuse 11.2 64bit.
When I go to open a machine it says
"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."
" Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface:
[Code].....
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."
I want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
It complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
I installed Oracle VM virtual box from software installler.I want to run windows xp on it.But I'm getting following error whenever i click on start(note : I haven't installed xp just created the vdi.):First window: (VirtualBox - Error):Failed to open a session for the virtual machine WindowsXP.The virtual machine 'WindowsXP' has terminated unexpectedly during startup with exit code 1.
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing'/etc/init.d/vboxdrv setup'as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.and in the end Bug Buddy reports error.I saved the report file but where should i post it.(Provide link if possible)
I am experiencing a problem with virtual box 4. Did an install from binary, and everything went ok and virtual box launches, but once I have created the virtual disk and the want to run it, I get an error, and the log says that it has to do with the ext4 filesystem and has a known kernel bug. How does one go about sorting this out. Here with the log from virtual box.
00:00:00.654 VirtualBox 4.0.4 r70112 linux.x86 (Feb 17 2011 17:29:29) release log 00:00:00.654 Log opened 2011-03-22T15:50:28.174435000Z 00:00:00.654 OS Product: Linux 00:00:00.654 OS Release: 2.6.34.7-0.7-desktop 00:00:00.654 OS Version: #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 00:00:00.654 DMI Product Name: HP Pavilion dv6700 Notebook PC 00:00:00.654 DMI Product Version: Rev 1 00:00:00.655 Host RAM: 1988MB RAM, available: 1595MB .....
Then tried moving the vbox files to my home partition which is ext3, but it says that file system is unknown, again herewith log: 00:00:00.589 VirtualBox 4.0.4 r70112 linux.x86 (Feb 17 2011 17:29:29) release log 00:00:00.589 Log opened 2011-03-22T16:06:15.412283000Z 00:00:00.589 OS Product: Linux 00:00:00.589 OS Release: 2.6.34.7-0.7-desktop 00:00:00.589 OS Version: #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 00:00:00.589 DMI Product Name: HP Pavilion dv6700 Notebook PC 00:00:00.589 DMI Product Version: Rev 1 00:00:00.590 Host RAM: 1988MB RAM, available: 1476MB .....
I've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
i installed kde to my usb drive but i think the grub also went to it because im running windows 7 and now kde but would like to know how to uninstall it if i ever have to. and also i cannot boot my computer unless that specific usb is connected
i have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
