OpenSUSE :: 11.4 Freezes When Running KVM Virtual Machine
Apr 8, 2011
I have 3 boxes running opensuse-11.4 64 bit - Phenom-I 2.6 GHz, Intel Q9400 quad core 2.66 GHz and Intel SU7300 dual core 1.3 GHz (the last one is a laptop). When I run a KVM virtual machine and load it quite a lot all host OS freeze. Interestingly, the laptop works the longest (hours), while the fastest system with Q9400 freezes in max. 10 minutes. After a hard reboot there is nothing in /var/log/messages This bug is 100% reproducible. The guest OS is either RHEL or openSUSE. Is it a 11.4 bug or I am missing something? Have not tried the same hardware with RHEL-6.
It complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
why does my virtual machine freezes when I flush iptable rules. i tried to install virtual machines 3 times and every time I flush iptables on host, virt machine freezes down. What can be the issue? Is it with the host installation or something else?
My hostmachine is Windows, and install Ubuntu on a virtual machine. I developed some program on Ubuntu. Suppose I want to transfer these files to a folder in Windows. How to find and get these files, which logically are stored in the virtual machine.
I'm just trying to know if is there is a way to run the first version of linux in a virtual machine. Since I am very new to this, my aim is to learn something basic on how the first version of linux kernel was built and worked.
from a local machine i connect to the remote via the terminal:$ ssh -X john@192.168.1.248 VirtualBoxthe vb dialog box appears with the list of the virtual machines on the left hand side, just as if i was runing it locally, but when i try and start one of the machines it crashes the connection!why dose it crash the connection and what can i do to make this work?
I am getting seriously tired of running MS Office in a virtual machine. It's been about 18 months since I tried running in on Wine, so I just checked out WineHQ and CodeWeavers and apparently usability hasn't improved at all.
I keep trying to use OpenOffice but whenever I open PowerPoint presentations they are always kind of messed up. This week, somebody sent me an MS Word file for printing labels for a mail merge and the label template file opened up blank. Anybody else have any brilliant work arounds or am I still stuck with my MS Office VirtualBox!! It's really hard to believe that its 2011 and Linux is still missing a world-class Office Suite...
I have removed Network Manager Gnome from my Ubuntu which is a virtual machine(Guest OS),I see the internet is no more running inside this Virtual Machine.While in other Virtual Machines (Other Linux) I had not removed Network Manager Gnomeand I see internet is running fine in them.
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
I want to do two things: Set up a virtual machine on Windows 7 to run Ubuntu Set up a way for the virtual machine to read the windows disk or windows to have read/write access to the virtual machine's disk. My goal is to have a place where both Ubuntu and Windows can read and write. What software is good for this task? Are their free programs that can run virtual machines? Also if my machine is running Windows 7 64-bit, can I install Ubuntu 32-bit? Or am I forced to use Ubuntu 64-bit? Or does it not matter?
i just finished successfully installing a virtual machine and windows xp. the windows setup finished no errors, but now when i try to boot up it gives me the blue screen of death (see attachment). after the bsod it just reboots.
note: in the screenshot it doesn't look blue but it is. i couldn't pause it so then it would show blue so it ended up black.
I'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
I have an nVidia radeon x1300 series running on my suse 64 bit system. The problem is when I try to enable dual head it tells me that I dont have enough virtual memory so when I add the: Virtual 3840 1200 under the screen section it works for a couple of minutes and then bom! it freezes up no mouse no keyboard response and the screen gets all distorted. whats odd is that I can still ssh to the system. The following is my current xorg.conf without the Virtual flag.
Code:
# /.../ # SaX generated X11 config file # Created on: 2010-12-19T10:38:36-0500.
I have been unable to create any type of Windows VM in Xen. Every time it tells me that the processor(s) in the machine do not support full virtualization. After some research, I found several articles regarding the vmx setting in /proc/cpuinfo not showing up when the xen kernel is booted versus it showing up in the default kernel. Of course, I am not seeing the vmx extension in /proc/cpuinfo after I boot to the xen kernel. In the other posts where other people are in the same situation, the only resolution is to upgrade to the 2.6.16 xen kernel. I am already past that:
linux-vxke:~ # uname -r 2.6.31.8-0.1-xen
yet I am still unable to create any form of Windows VM. I have even seen that some people are able to create a partially virtualized Windows VM, and they report that the message is only a warning. However, I am unable to get past this message. I am running a Dell Optiplex 760 with an Intel Core 2 Duo E7300, and I have the VT-x setting enabled in the BIOS. Has anyone else seen this situation or have any thoughts on why this is happening?
I ma new in OpenSuSe and I want to create virtual Machine using the graphical interface Xen of Opensuse 11. I did'nt find a good tutorial ton use it or a gut getting started with xen in Opensuse.
I have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.
I have OpenSuse 11.3 with VirtualBox on it, and with installed Oracle DB (on host OS).. but, sometimes this computer is disconnected, without it's gateway (adsl router)... and in that case, I cannot ping from virtual OS to host OS, or another virtual OS. I tried to use 'Host only' option within VirtualBox, but it doesn't work. What should I do? It seems that virtual machines requires some kind of gateway/router, but since machine is disconnected, it's not working.. how could I fix it?
More than often, my OpenSUSE 11.3 box completely freezes when surfing the internet with FireFox, forcing me to stop the computer the hard way (pushing the on/off button) and restart itDoes anyone encounter the same issue? Does anyone has a start of a clue to explain me why? Soes anyone could tell me where to start to look for the reason!Note that the last time the problem occues (i.e. 10min ago) was on this site (no other tab opened).My configurationSONY Vaio VPCF11S1E: Core i7 720QM, 6GB RamOpenSUSE 11.3 64bits. I did not install the official NVIDIA driver as it causes the screen fonts to be extremely bigOPenBox-session + tint2FireFox has the adobe flash plugin installed
Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
I have installed virtualbox on opensuse 11.2 64bit.
When I go to open a machine it says
"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."
" Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface:
[Code].....
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."
I want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.