OpenSUSE Hardware :: Reload The Firmware Come Up With Device Not Connected Errors (even Under Windoze XP)?
Mar 12, 2010
My old Creative Zen MP3 player has just gone titsup - it's gone into recovery mode and attempts to reload the firmware come up with device not connected errors (even under Windoze XP) So I'm looking around for a replacement and the Cowon D2 looks good as it takes SD cards like the zen (and I'd just bought 2 new 8Gb cards). The Zen used mtpfs which worked under linux but not well an I believe the D2 just connects as USB memory. Anyone out there using a Cowon D2 under Linux?
View 1 Replies
ADVERTISEMENT
Nov 29, 2009
After installing 64 bit 11.2 with no apparent problems: computer hangs up on desktop boot opensuse 11.2-2.6.31.5-0.1, however I can boot from failsafe opensuse 11.2-2.6.31.5-0.1. I had problems trying to install Ubuntu so I checked out the opensuse. I do not know if this is an easy fix! I decided to avoid buying anymore windows system software. I ran memory test with no problems. The firmware test reported 4 errors. I have windows XP installed on other hard drive - no problems there.
View 5 Replies
View Related
Feb 19, 2010
I am getting crazy with my system.(I got the machine from previous guy working on it with XP, I installed myself linux, but with zero experience, 2 years ago).starting point yesterday:3 HDs in raid, SUSE 10.3 x64 installed on sdc1 with problems, XP on sda, SUSE 10.2 x32 on sda as well:
Code:
Disk /dev/sda: 250.8 GB, 250808893440 bytes
255 heads, 63 sectors/track, 30492 cylinders
[code]....
View 3 Replies
View Related
Jan 24, 2010
All I do is connect my Palm to the usb port, and it starts a reset loop. It resets, gets booted, and crashes to reset again. What's up with this? BTW, this same palm worked with gnome pilot on Debian and Vector installs, and works currently with an XP install. But on my 11.2 suse, it goes crazy.
View 9 Replies
View Related
May 14, 2010
When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again.
Xorg.0.log:
...
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(--) Synaptics Touchpad: touchpad found
# { rmmod psmouse && echo mem > /sys/power/state && modprobe psmouse; }
(WW) : No Device specified, looking for one...
(II) : Setting Device option to "/dev/input/mice"
...
How to tell X.org to try it's InputDevice again (without restarting X server)? rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.
View 1 Replies
View Related
Jun 13, 2010
I'm having some difficulities with truecrypt and cannot figure out what's wrong since this is my first attempt to create hidden encrypted partition. I'm using ubuntu 9.10 64b with latest 6.3a truecrypt. After using truecrypt gui (just command truecrypt) I've tried: create volume-->create volumne within a partition/drive-->hidden trucrypt volume --> select some /dev/sdX by my choice --> select aes & sha512 --> password --> and format it.
when formating finished message "wrong ss, swith or wrong superblock of /dev/loop0" appeared. I've got no idea what could I do with it neither know whats program trying to do! Ok formating's done, then if you're trying to mount that partition then I would expect prompt for password, but that did not happen ...
EDIT: sudo mount /dev/loop0 /media/tmp/ also complaint about wrong superblock, but that does not ring any bell since i've got no idea what /dev/loop0 is or is for...
EDIT2: I've tried another approach also:
sudo truecrypt -t -c
sudo truecrypt -t /dev/sda3 --filesystem=none
but the first command finished creating 100G drive in 1 sec (nonsense) and latter one prints:
Error: device-mapper: reload ioctl failed: Invalid argument
Command failed
View 3 Replies
View Related
Mar 10, 2010
I know the fairly straightforward and obvious answer to this question, but I wanted to get the peoples' thoughts and feedback about it.I need to use Windoze for general work and school reasons. There have been a few things, namely ActiveX controls, that I have been unable to port to Linux.My question is: would it be better to use Windoze or Linux as the host OS, and why?
View 1 Replies
View Related
Jan 10, 2011
I am trying to install a 11.3 virtual machine through Xen on a 11.3 installation. I am trying to install from the opensuse DVD. I get to this point, setting up everything (I can only do paravirtualization) Then the DVD spins for a little while and after that I am returned this error message "device 0 vif could not be connected opensuse....."
I tried a bunch of different settings in the previous screen and I always end up with this error I googled around and it seem to be a problem in different distros but I could not spot a solution at all
View 9 Replies
View Related
Jun 15, 2010
I would normally consider throwing the laptop out the window but I have not done that.YetHere's the situation. I got fed up with Windoze. So I downloaded Opensuse 11.2 onto a dvd. I then installed it.Ran/Started Opensuse for the first time... Wow. Beautiful, amazing, fast, etc etc. So.. Okay so far, except for one or 3 niggles, one of the main ones being that I could'nt connect to the Net.Anyway, I rebooted, and when the Startup (?)-Screen came up, it had 2 versions of Opensuse on the 'list' (one of them a Safe Mode), and ....3 versions of Windoze. Yeah.. Three. First bit of confusion.
I clicked on "Windows 1" and got a black scree with the words "Boot Mgr missing" (or similar), 'Press Ctrl Alt Del"..... Great, I thought. So I did that, anyway, and upon reboot tried "Windows 2" instead; same thing. Tried a third reboot, and "Windows 3". SAME. Now I'm P****d off.......Apparently, when it was installing, it said it would be 'Shrinking' Windows to make space. Would this have anything to do with it? How on earth do I get Windoze BACK, at least until I can try out another version of Opensuse OR a different Linux Distro????
View 7 Replies
View Related
Jul 23, 2011
Has anyone had this problem before?,
b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
couldnt find the firmware for mac 10.6 osx wireless.
View 1 Replies
View Related
May 17, 2010
I installed the VSFTPD from YUM and installed the webmin module.i can connect to the server with Telnet but can�t list files.When i try to connect with a FTP client i get the following errors: An error occured openig that folder on the ftp server. Make sure you have access to that folder.
200 Switching to ASCII mode.
227 Entering passive mode (172,20,1,5,69,210)
How to i choose Users and what folders to use??
View 19 Replies
View Related
Nov 30, 2010
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
View 2 Replies
View Related
Jun 18, 2015
Working on Debian 7.2.0.
In a specific context I want to automatically make operationnal some USB WiFI devices, deploying automaticaly firwmare (may be not free packages) depending on device ID (vendor ID/product ID). Dev device is a Netgear WNA1000 (driver ath9k, with htc_9271.fw firmware).
I tried to reset the USB bus (modprobe -vr ehci_hcd; modprobe -v ehci_hcd) but it's not really reliable, with sometimes kernel panic.
Is there an "official" way to "mount" the device (the system create the device wlan0) just after deploying the firmware? Maybe using udev ?
View 3 Replies
View Related
May 26, 2010
This is a problem that has been stabbing at me for years now. I have a nice pro-m soundcard - the EMU 0404 - with the cursed "1102:0004" device ID. I am wondering if anyone has gotten the early version of the 0404 (0004 / firmware 1.0 version) of the card working with Linux? All the information I can find is a couple years out of date. Maybe everyone just gave up when the later versions of the cards started to work with ALSA, but I really can't afford to replace this thing.
Regardless, if anyone has gotten this to work please let me know. If I really just need to resign myself to throwing the card away / taking a $150 loss on a new one, I'd also like to know,
View 2 Replies
View Related
Jul 23, 2011
I thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
View 9 Replies
View Related
Sep 10, 2009
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
View 3 Replies
View Related
Dec 23, 2010
i have recently installed Ubuntu 10.10 on my computer, which is HP 4710s ProBook.I've installed it with wubi and everything seem to be working just fine, except for my wireless.It is showing me: device not ready(firmware missing).
View 1 Replies
View Related
Jun 17, 2011
I tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
View 9 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Jun 23, 2011
I was playing with a theme (Atolm-GS) and followed the install instructions which stated to back up the /usr/share/gnome-shell/theme directory, and replace it with the one from the theme. I did this, logged off, logged on, got my wallpaper for a second, then the Oh No Screen. I logged off, logged in to IceWM, replaced the theme folder with the original, logged back in to Gnome3 and same thing. Alt+F4 does not get rid of the OH No screen. My ~/.xsessions-errors file contains the following:
/etc/X11/xim: Checking whether an input method should be started. sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_US.UTF-8. There is no default input method for the current locale. Dummy input method "none" (do not use any fancy input method by default)
[Code]...
View 4 Replies
View Related
Mar 18, 2011
How do I tell what comport a Bluetooth device is connected to? The software that i'm using needs to know what comport to connect to.
View 2 Replies
View Related
Feb 10, 2010
I am trying to write a script to turn my HTPC off automatically and turn it back on again at a specified interval.
I've got the turn on off bit sorted using /sys/class/rtc/rtc0/wakealarm but I want the script to not turn the machine off if say something is downloading, I am currently watching something etc and i dont think I will have any trouble with that.
But what I would really like to be able to do is tell if my TV is currently on. I dont think anything x11 related would work here and this may not even be possible. Does Ubuntu "know" if it's display device is powered on or not? if so can I interrogate this somehow?
View 5 Replies
View Related
Nov 12, 2010
I have a device (not a pc) connected to my pc via ethernet, it dose not show up in networks, I was hoping there was a way of scanning to detect for it, is there a way of seeing content of it is basically what I'm asking?
View 5 Replies
View Related
Feb 8, 2011
Recently, I wiped my existing install of Ubuntu 10.10 and reinstalled it over. That went smoothly, except for one little snag. Now when I try to connect to the Internet, up on the top when I click the little network icon, under Wireless Networks, instead of showing the networks I can connect to, it says:
"Device Not Ready (Firmware Missing)" So I move the little wireless switch on my laptop, and then it says:
"Wireless Disabled" What did I do, and how do I fix it?
View 4 Replies
View Related
Sep 6, 2011
I have a FireWire camera LifeSize connected to my PC in the FireWire interface. My PC has miniPCI slot and with external converter its having a FireWire interface. Now its Ubuntu who is not showing me anything at all when i try:
$ uname -a
Linux desktop 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux
[code]....
View 1 Replies
View Related
Sep 10, 2010
I got a sort of usb connected device(not an external enclosure) so i can connect a sata hard drive into a machine that only has ide connections but the drive is not mounting. I am not very good at mounting slave hard drives anyway ,,,,never been able to get one happening without help. I am wanting to read this drive as i killed another desktop machine(i think the mb) and i need the data off the hard drive. The drive is shown in a directory and in the media directory. Can't think of what else sorry as i am so tired from testing everything out of the machine that i killed.....
View 4 Replies
View Related
Nov 1, 2010
I am running 9.10 latest updates (as far as I know) My problem is with my usb connections.I cant connect different usb devices to the same usb ports if a device had been previously connected to it. IE: I have to keep my camera connected to one particular port. If I disconnect it and connect anything to it, it cant be seen. It doesnt matter if I reboot. Is there a way to clear out any memory that stores the usb port assignments?
View 1 Replies
View Related
Mar 25, 2010
How to find ipaddress of the device connected to the system.
View 14 Replies
View Related
Jun 12, 2011
I have installed Ubuntu 11.04 on my laptop. For some reason Wireless Network does not work any more (there was installed 9.04 before).
lspci says:
Code:
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
System->Administration->Additional Drivers doesn't list anything.
View 9 Replies
View Related
Apr 19, 2016
Using jessie over 4.2.8 or 4.3.4 kernel.
Used both the default bluez package, 5.23 and building bluez 5.36 by hand.
hciconfig shows a good configuration,
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0
hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.
> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06
[Code] ....
However when the app tries to connect it always gets connection refused at gatt_connect.
gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.
Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.
Also systemctl|grep bluetooth shows :-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth
/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.
Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?
View 1 Replies
View Related
