Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies
I have OpenSuse 11.3 with VirtualBox on it, and with installed Oracle DB (on host OS).. but, sometimes this computer is disconnected, without it's gateway (adsl router)... and in that case, I cannot ping from virtual OS to host OS, or another virtual OS. I tried to use 'Host only' option within VirtualBox, but it doesn't work. What should I do? It seems that virtual machines requires some kind of gateway/router, but since machine is disconnected, it's not working.. how could I fix it?
View 4 Replies View RelatedI have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies View RelatedI have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
I am facing an issue connecting to WPA Enterprise network using a CA Root Cert. I have traced it to a bug report here [URL] when the fix is going to get push?
View 4 Replies View Relatedsince a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies View RelatedI recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies View RelatedAre there any limitations to connecting to a WPA2 Enterprise network with PEAP authentication on linux? Here at my university, on any major linux distro, I can only connect to the secure wifi 50% of the time and when I do successfully connect, it get booted off in a few minutes. At home I can connect to my WEP internet network easily.
Using Windows I can connect to my home WEP network and my university's WPA2 Enterprise network easily. Note: I work at the computing department here at my university, so I know that there is no anti-Linux mentaility which resticts access to Linux-based distros.)
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View Relatedwhile trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies View RelatedI would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies View RelatedThis is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
I'm running Red Hat as a virtual machine on VMWare and the network configuration on VMWare is a bridge and i have had this problem, some times does not get network o others do, i have verified code...
View 2 Replies View RelatedI am preparing for the RHCE and would like to get some feedback on network installation.
1. How can we practice network installation on the Vista? I have installed CentOS installed using VMware desktop on Vista windows?
2. In exam do we get network server installed or we have to install it?
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
I installed a minimal ubuntu (minimal.iso) on a virtual machine (vmware) on my windows pc using following packages:
Code:
sudo apt-get install install gnome-core gdm network-manager-gnome human-theme x11-xserver-utils tangerine-icon-theme gnome-themes-ubuntu ubuntu-artwork jockey-gtk gnome-utils firefox
I'm using the Ubuntu VM as my local http server. It is reachable via ip - so http://IP-ADDRESS works. I also use samba for shared folders... but ubuntu is not listed in my network. What means that i cannot access files from outside the vm. Do I have to install further packages, because "normal" ubuntu distributions are listed in my network connections. Samba packages are correctly installed.
I'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
I created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
I'm having issues with my GigE Marvell NIC. The problems have started recently. Anytime I push network bandwidth over ~9MB/s, I loose all network connectivity. Stopping the network, rmmod'ing and modprobe'ing the sky2 module and then starting the network again does not resolve the issue (even though eth0 dissapears and then comes back). The only non-standard configuration (as far as desktops go) in my network is that I use a bridge so a KVM virtual machine can be exposed directly to the network. I'm currently testing the problem to see if it exists outside of the bridge.
[Code]...
I have ubuntu 10.10 with all current updates. and I have virtualbox installed I have xppro running through virtualbox. I am unable to use my printer with linux, (lexmark) so I want to hook up my printer to my xp that is running in virtualbox. but the xp does not see any usb devices.
View 3 Replies View RelatedI am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
A couple of weeks ago, I completed a system upgrade that was motivated because I have to deploy Windows 7. I have to deploy it because my Windows development environment is getting very long in the tooth, and I have to become current again for a project of mine that is underway. So, yesterday, I deployed Windows 7 Professional in VMware 7 hosted on Mandriva 2010. With my new upgrade, I have a very capable quad-core athlon system with an NVidia 240GT video card, and it runs Aero quite nicely in the virtual machine. I do have to say that Windows 7 looks nice and isn't too annoying to use, except - of course - when I need to dig into it to change some setting or another.
Now, on Windows, for many years I have used Zone Alarm firewall rather than the Windows firewall, because ZA monitors and controls outgoing connections. I have used this on both my Win2K development system (virtual machine) AND my Win XP laptop to keep microsoft applications (notably media player) from calling the mother ship when I didn't think they should. It has worked well. So one of my first actions was to download the newest copy of ZA free firewall and deploy it on Windows 7, after disabling the Windows firewall. Well guess what. ZA doesn't stop Windows from calling the mother ship. I have all settings on ZA set to "ask" before allowing anything to contact the net, but I've been playing with some multimedia things and the microsoft software has been talking on the internet as happy as you please, and ZA hasn't asked me a single time if it could do so.
Of course, when I ran a few tests with ping and tracert, ZA asked me. Also, I had to fiddle with ZA settings a bit to get the Windows 7 to successfully talk to my LAN. But when Windows 7 wants to talk to microsoft, it talks regardless of what ZA says. Well, when you get down to it, this is one reason I have Windows running in a VM...I WILL be in control, regardless of what microsoft wants. Does anyone know of a tool that I could use from Mandriva to prevent a VMware client from talking to a website? I'd like to be able to easily enable/disable it so that I can let Win 7 talk to microsoft when I need for it to do so, but no other time. I'm using bridged networking in VMware so all my virtual machines have their own IP addresses, but of course all of them (as well as my host Linux system) go through the same network adapter. It seems to me that iptables would have to work for this, but I'm not at all sure how to set it up to do it given the bridge.
I installed KDE on a machine that also runs Vista. We used to have a partial T-1 line with router that ran fine with both OS, but we had to drop the T-1 and go with AT&T DSL, which runs fine with Vista, but won't connect with KDE. I have searched this forum, and others, but nothing seems to work. I also used the 'swerdna' fix, suggested on these pages a while back, but that also didn't work. Of course, AT&T offers no support for Linux.We went to Linux because we were having chronic problems with the Vista system, and would rather not have it at all
View 8 Replies View RelatedCurrently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
