I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 RepliesI was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
Technically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 Replies View RelatedI seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
I've recently installed 11.4 with KDE SC on my Eee PC 1015 PED netbook. I've had absolutely no problems with it, but after a reboot the speakers have stopped playing, I can only hear audio via headphones. I tried many settings in systemsettings and YAST, but nothing helps. Here's all the info I need to provide, according to the sticky thread:
The link from # alsa-info.sh: [URL]
The rest:
Code:
# rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.24-6.1.i586
alsa-firmware-1.0.24.1-3.1.noarch
alsa-plugins-1.0.24-6.1.i586
alsa-oss-1.0.17-32.1.i586
[Code].....
This is a Dell Optiplex 380 desktop with an ICH7 family 82801G sound card. If I install openSUSE 11.3 or HIGHER, the OS will properly auto-configure the card and the sound is fine. However, 11.3 or higher also has an issue playing back full-screen flash video as well as 11.2 (may be a 64-bit related issue?). I suspect that the problem lies somewhere in the fact that this PC was produced considerably after the release of oS 11.2 so it's not detecting the card right.
I have gone so far as to enable a repo newer than the SUSE version to attempt to upgrade the ALSA components. I guess what I can do is throw in a live CD for 11.3 or 4 and go into YaST or 50-sound.conf and try to see what's going on or just copy it to a flash drive. I have a feeling that might get me farther than jerking around with this any longer.
I have installed opensuse 11.4 in my lenovo ideapad G460. But, I am not being able to make the inbuilt microphone work. It does not record anything and also does not work in skype. I am not that expert with linux. I looked at different posts in this forum regarding microphone detection problem, bit could not follow. How to setting up my inbuilt microphone?
View 6 Replies View RelatedI have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.Here what it looks like:
Code:
$ alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
I've also tried Ubuntu and OpenSuse latest LiveCDs, both 32 and 64 bit - the result is the same alsaconf does not help.I'm totally puzzled and will be gladfull for any hint.
Additional info:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 0/1
[code]....
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies View RelatedI'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
I'm trying to make the microphone work on an Asus G1S. Neither the internal analog microphone nor the external one is recognized. 50-sound.conf in Modprobe.d has :
options snd slots=snd-hda-intel
# u1Nb.ULiNFUWt9WF:Asus M51S series
alias snd-card-0 snd-hda-intel
[code]....
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies View RelatedI just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
My laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code:
arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
rpm -qa '*alsa*'
Code:
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-oss-1.0.17-25.2.i586
alsa-devel-1.0.21-3.2.i586
[Code].....
I just did a clean install of opensuse 11.3. Pretty much everything is working greatHowever, I tried to record a video of a ..... stream and the sound didn't record while using xvidcap. I'm using all default settings
View 9 Replies View RelatedWell, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
1 i have tried to get my sound output working in totem kaffiene and banshee to no avail. reading through several blogs posts and the such of likes has gotten me to ttry and set pulse alsa and oss so im even more confused. i can get a sound test to play but cannot get music to work??
2 i would really like to use audacity to record but it keeps hanging after about three seconds. i purchased a new acer aspire 5532 and deleted windows 7 to encounter
I have troubles with microphone on skype. It used to work ok and now I don know what i have changed. I can hear myself in earphones is I blow into mic. but if I try to record myself arecord -d 10 test.wav Here is may amixer output:
[Code].....
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
Installed Skype latest version on a Mythbuntu 9.10 pretty vanilla install. Tried testing the microphone with it, after getting into AlsaMixer and enabling the mic and such, I got it playing back something but it is like stretched out, so playback goes really slow and deep. what can I do that is more basic for testing the mic to remove Skype from the equation. Mythbuntu is really pared back, so I will likely have to install, I like to keep it to the minimum. What is the easiest way most people test a mic? Second, just in general, what could cause this to act this way. I don't see anything in the mixer that makes me think it is causing it
View 1 Replies View RelatedI can hear myself speak in the mic but Ubuntu is not recording/capturing the sound. Actions Taken: I followed all the steps listed here for the Alsa update script. I've also tried changing my /etc/modprobe.d/alsa-base.config file with the following configurations one at a time.
[code]...
My capture settings are 'on' in alsamixer as in they are in red with the words CAPTURE underneath it.
I have a mic that plugs into the standard microphone jack and It has been working for months and now no matter what setting it's on it won't work! Not a single program works with it! It says its recording but when I hit play I get white noise. Will updating fix the problem?
View 2 Replies View Relatedhow can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS
- recording audio with Sound Recorder
- installed PulseAudio Device Choooser and PulseAudio Volume Control
- Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
I have no sound input from my microphone. With a fresh install of 11.4/gnome desktop it was working.
Then all I did was installing the multimedia support from the script in the opensuse guide (which interestingly includes some files for k3b so I suspect there is a conflict of libraries now that some kde libs have been installed) and a full system update. After that, my mic has stopped working.
If it helps at all, the output of the ALSA Information Script at my machine is hosted at: [url]
Dell Inspiron with dual integrated mics. I get no sound when i try to record with the integrated webcam. I have everything turned all the way up in the mixer, ie: mic, capture, mux, etc but still no sound.
View 2 Replies View RelatedI have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
My trusty Tascam us122 is now an ex-card (as the guys from MP would say). I'm looking for a new one:1. Obviously it has to play really nicely with linux2. it needs to have phantom powerI'll be using it for recording voice (a Behringer Studio Condenser Mic) and my electric guitar.
View 4 Replies View Relatedwhen I try to make a recording in my laptop (integrated mic), I am able to hear myself (when I reproduce it afterwards) but with a lot of noise. I read a solution of going to alsamixer and disabling "L-R" in capture, but when I do that,I am not able to hear anything. Another thing (I don't know if that has to do with it) is that when I go to volume control->recording, every time I see a small red "x" in every mic (microphone, capture, internal mic) and if I enable them, close and reopen volume control the same "x"s appear.
lspci |grep -i audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)