OpenSUSE Multimedia :: Eee PC 1015 PED Intel 82801G Audio Only Via Headphones
Jun 25, 2011
I've recently installed 11.4 with KDE SC on my Eee PC 1015 PED netbook. I've had absolutely no problems with it, but after a reboot the speakers have stopped playing, I can only hear audio via headphones. I tried many settings in systemsettings and YAST, but nothing helps. Here's all the info I need to provide, according to the sticky thread:
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
This is a Lenovo L512 laptop with Intel HD Audio (Realtek ALC269 / Intel G45 DEVIBX) which was recently upgraded to Squeeze. I've been having trouble using the headphones on this machine, as the speakers continued to play while the headphones were connected. I normally use KDE, and the available mixer only offers one channel. I thought I might be able to manually silence the speakers by using the command line tool alsamixer. Unfortunately, alsamixer has a channel for the headphones, but it doesn't do anything, only master volume is controllable. By luck I decided to play around with Gnome today and to my great surprise, System -> Preferences -> Sound offers complete control over all functions of the audio hardware. Does anyone know how I could get these features working under KDE?
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
I have openSUSE 11.4 KDE version (64-bit) on a desktop PC. My sound card is ASUS Xonar DX 7.1 (PCI-E). I am brand-new to the Linux experience. I get audio out to my speakers which are connected to the jacks of the rear I/O panel of my PC. I do not however get audio out to my headphones which are connected to the jack in the front panel. I know that the headphones work fine because they do so when I boot up in Windows XP. Here is what I discovered so far: KMix does not show that I have a front panel audio channel. But when I run AlsaMixer it does show that I have such channel and, upon manually turning the volume on, I do have sound out to the headphones.
Therefore, I deduct that I have some sort of configuration problem with KMix and would like to fix it as I prefer to use the GUI interface instead of the AlsaMixer one. It's just a matter of preference! I would like to troubleshoot things using the Audio Troubleshooting guide (SDB:Audio troubleshooting - openSUSE) but I notice that openSUSE's version 11.4 is not mentioned in it. Should I follow the instructions for version 11.3 or wait for an updated guide?
I've decided to get back into using Suse as my primary OS! I'm almost there, only a few minor issues to work out remain. One of these issues is with my audio drivers. My audio is working for the most part. I have sound coming from both my speakers and the front-audio jack. When I plug headphones into the front jack the audio is muted; however, unless I unmute the audio I won't get any sound from my headphone jack. The volume is shared. How can I give headphones a separate volume control? Or just completely mute my speakers when I have headphones plugged in. Using alsamixer, Headphones are disabled. Which seems odd. The output of alsa-info.sh can be found here.
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code: arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
I have some problem with my sound settings. I only get sound through the internal speakers of my notebook, not through the headset.Does anyone know how I can fix this?My notebook is an Asus K52f with Ubuntu 10.10.
so my problem is that i can't disable the speakers on my laptop when i plug in my headphones. in other words, i get sound from both the headphones and the speakers, when the expected behavior is to disable the speakers when headphones are plugged in, and enable the speakers when headphones are unplugged..
i've been looking around the forum and google, and i found a way to adjust the speaker and headphone volume manually in alsamixer. To adjust the headphone volume on alsamixer, i can raise or lower volume using the "Front" volume bar. To adjust the speaker volume, i raise or lower volume on the "Speaker" volume bar.
so, it's cool to know that i can do this manually, but i'm sure there's an option i can put in alsa-base.conf to automate this. i just can't seem to find that option...
anyway, i'm using Ubuntu 9.10 64-bit...and here's my alsa-base.conf file
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
I currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
I was trying to fix my audio, I had it coming out of my headphones and speakers at the same time. I was told to run this script to try to fix the problem but it only made it worse. I've attached screen shots showing that I now have no hardware showing.
I'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code: $ aplay -l **** List of PLAYBACK Hardware Devices ****
I have a lenovo g555 laptop, about a week old with lucid installed, and whenever i try to play things through the headphones, they come through the speakers as well. I've tried tinkering around in alsa, but the ony two levels are Master and PCM, which seem to adjust both headphones and speakers at once. My audio codec is "Conexant ID 5069"
I recently received my new multimedia laptop - an HP Dv7. I proceeded to install Ubuntu 9.10 on it and I've had no end of troubles with the sound card including, muffled sound - seemingly only coming from the LFE channel, only stereo controls in pavucontrol, failure to send sound out the HDMI port, headphones not working and not cutting of the speakers when the headphones are plugged in.
I believe that all of this will be solved if I get the appropriate driver for my card. I have searched around and sound in particular has tons of posts from many people all with slightly different problems, solutions and hardware. None of the solutions seem to be working. Also I just tried booting from the live CD and the sound is the same - no 5.1 and just muffled sound. I think my sound card is just too new and there doesn't exist a proper driver for it yet.
Here's what I get with lscpi: Code: % lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 01:00.1 Audio device: nVidia Corporation Device 0be2 (rev a1)
This is a problem that I have had since Ubuntu 8.04 when the sound on my system stopped working. I have an Intel DG33BU motherboard with audio onboard.
I originally had 7.04 installed on the system (sound worked fine) and did an upgrade to 8.04 for a couple of reasons and found the sound no longer worked.
I have since upgraded to 10.10 and despite trolling various audio threads have yet to get the sound working again. I have noted that when the system boots up there is a quick message (approximately from memory) 9.32.0061: audio codec not found for hda-intel.
Is there a troubleshooting guide or information someone can point me toward as I would like to solve this problem?
I have been trying to use the information at [URL]... otingProcedure to work through the problem.
Output:
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.083110, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf-bak, it will be ignored in a future release.
I loaded Ubuntu Remix onto my Eee PC 1015PE. I tried to install Desktop switcher and it messed up. But now I log into it using the Gnome Session which gives me the better desktop.
However. The sound works fine though my speakers but when I connect headphones. The sound stops from the speakers but does not work on the headphones.
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
I just installed OpenSUSE 11.3/KDE4 and now I have no sound from the headphone jack. I checked Kmix and everything is fine.I do remember that in OpenSUSE 11.2 I had this similar problem which I solved by switching ON/OFF the "Independent HP" option in Kmix. The problem with 11.3 is that this option is not available in Kmix.
opensuse recognises my logitech usb 350 headphones, but no sound comes out of them. i can speak into the microphone and hear myself through the speakers of hte headphones, but general audio like ..... or mp3s all come out of my onboard sound card (which appears to work fine).
Speakers are worming normally (sound okay) but when headphones are plugged in no sound is produced but the speakers are turned off. The headphones work on a different computer and work under windows 7 on this laptop. I tried to obtain the mmcheck script from one of the threads but can't find it anywhere on openSUSE site.
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
dell inspiron e1505 3.2 gb ram 1.86 ghz intel core duo ati x1400 gfx opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
I have an old Acer Travel Mate 290 with OpenSuSE 11.3 (LXDE) 30G and 240Mb RAM. I don't have sound in the internal speakers, I only have sound through the headphones. Here you will find the information of alsa-info.sh [URL]
When I type: rpm -qa '*alsa*' alsa-utils-1.0.23-1.8.i586 alsa-plugins-1.0.23-1.9.i586 alsa-1.0.23-2.12.i586 alsa-firmware-1.0.23-1.2.noarch alsa-oss-1.0.17-29.2.i586 .....
I might have a different problems as I have a newer laptop, a HP dv6-2170us with intel i5 cpu. I had no wireless with the 2.6.31 kernel so I upgraded to the 2.6.34 and had to manually compile my wireless driver. Everything works great now except the sound issue. I thought it use to work out the box with the old kernel, but then again I might be wrong. I knwo it works in the "other os" dual booting and all. Its a not a huge issue, but hopeing I could resolve it. Here is some of the info from reading some of the other posts. the model=dell-vostro I just tried to see if that works, which is doesnt, so thats why thats in my sound.conf file.
[Code].....
Have I missed anything? I have tried the fix here: Audio coming from both headphone and laptop speakers - Page 3 - openSUSE Forums page 3 about adding a repo and upgrading, but that upgrade wants me to revert back to the older kernel in which case I dont have wireless support or acpi working proporly, so thats not a doable thing for me.
