I have a mic that plugs into the standard microphone jack and It has been working for months and now no matter what setting it's on it won't work! Not a single program works with it! It says its recording but when I hit play I get white noise. Will updating fix the problem?
View 2 RepliesMy microphone was working properly until four days ago. I'm not sure if this appeared after a system update, I'm using LL 10.04. This is my onboard HDA Intel chip,from 'lspci':
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
I can record sounds from the microphone, but white noise is accompanied. The weird thing is that when I unplug the microphone, I can still hear the white noise. I've tried modifying the settings in gnome-volume-control and in alsamixer without luck. The white noise is persistent. I've read this can be related to pulse audio but no one seems to know how to reset it to its default configuration.
when I try to make a recording in my laptop (integrated mic), I am able to hear myself (when I reproduce it afterwards) but with a lot of noise. I read a solution of going to alsamixer and disabling "L-R" in capture, but when I do that,I am not able to hear anything. Another thing (I don't know if that has to do with it) is that when I go to volume control->recording, every time I see a small red "x" in every mic (microphone, capture, internal mic) and if I enable them, close and reopen volume control the same "x"s appear.
lspci |grep -i audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
When I turn my sound up all the way I hear a white noise or "staticy" sound which I do not know how to get rid of. My sound when playing music is not the best sound quality either. Please help me out somebody please. Here is my sound card info:
[code]...
My apt gets noise from outside. I would like to generate a white noise audio file and play it to block outside noise. I would prefer something like the low frequency hum of a big fan. How can I generate this file in using linux tools?
View 14 Replies View RelatedWell I've been trying to get suse 11.x up on antec media center and run mythtv on top of the platform. Only one thing "partially" missing is the sound. I hope that I'm not annoying anybody by posting this on the wrong site but hopefully somebody will give my directions on that or if there are something that I forgot to mention. I'm lost here and I hope somebody has the same problem and a solution to this problem ! Problem. Mythtv, xawtv and tvtime all display picture close to 100%. Sound start as 100% ok but after 30s - 100s gets lot of white noise in it.
[code]...
I don't get any error messages or dmesg on this so nothing there.
I get no sound during recording - respectively just a background-noise - ssssssssssss - when I turn ON CAPTURE and DIGITAL volume input to 100% ON. When I mute CAPTURE or DIGITAL this sound disappear..
In Skype I get no sound recording at all..
I have a few mixers - alsamixer, kmix, gnome-alsamixer, aumix... all seems to corespond and react to each other.
Actually i have no Microphone posibility in mixers and as well nothing through aumix..
In System/Settings/Sound - in sound record test: "Failed test tubes for structures" 'gconfaudiosrc ! audioconvert ! audioresample ! gconfaudiosink profile=chat'
Device HDA NVidia (Alsa mixer).. as well I have a posibility of choosing VIA ID 4397 (OSSM ixer)
Installed Skype latest version on a Mythbuntu 9.10 pretty vanilla install. Tried testing the microphone with it, after getting into AlsaMixer and enabling the mic and such, I got it playing back something but it is like stretched out, so playback goes really slow and deep. what can I do that is more basic for testing the mic to remove Skype from the equation. Mythbuntu is really pared back, so I will likely have to install, I like to keep it to the minimum. What is the easiest way most people test a mic? Second, just in general, what could cause this to act this way. I don't see anything in the mixer that makes me think it is causing it
View 1 Replies View RelatedI can hear myself speak in the mic but Ubuntu is not recording/capturing the sound. Actions Taken: I followed all the steps listed here for the Alsa update script. I've also tried changing my /etc/modprobe.d/alsa-base.config file with the following configurations one at a time.
[code]...
My capture settings are 'on' in alsamixer as in they are in red with the words CAPTURE underneath it.
I have troubles with microphone on skype. It used to work ok and now I don know what i have changed. I can hear myself in earphones is I blow into mic. but if I try to record myself arecord -d 10 test.wav Here is may amixer output:
[Code].....
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
how can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS
- recording audio with Sound Recorder
- installed PulseAudio Device Choooser and PulseAudio Volume Control
- Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
I have installed opensuse 11.4 in my lenovo ideapad G460. But, I am not being able to make the inbuilt microphone work. It does not record anything and also does not work in skype. I am not that expert with linux. I looked at different posts in this forum regarding microphone detection problem, bit could not follow. How to setting up my inbuilt microphone?
View 6 Replies View RelatedI have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies View RelatedThis problem began a few weeks ago.Try to play a MythTv recording, and the screen goes all "static like" then Ubuntu restarts. (worked fine w/o this problem for a number of years)It is ready for me to log in in only a few seconds, so it is not a full reboot, but all the previously opened programs are now closed. Nothing similar happens when using any other program.
Ubuntu 10.10
MythTv version 23
AMD Athlon 64X2 5200+
1.9 GiB RAM
70 GiB free HD space
My flash player has stopped playing back audio on a particular TV show recording. Movie is fine but no audio. It's fine with every other movie. However, I notice I can play that same tv show in windows, which has to discount a problem with the station or their movie files. The slack package used to play this tv TV program until recently.
Code:
[URL]
Do you think reinstalling the package would fix it?
i.e.
Code:
slackpkg remove flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
then
Code:
slackpkg install flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
Has anyone seen a problem in which all videos play only in black and white? It matters not which player I use VLC, Mplayer, Banshee. I am a new user using 11.04
View 2 Replies View RelatedMy green audio output jack is broken, under Windows 7 I used to reroute my audio to the red microphone jack, so I could listen to music with headphones through the microphone jack. It took me some simple mouse clicks.
How to do this in Ubuntu 10.10? I haven't find anything useful for days for this particular problem.
I was wondering if you could help me out with this Flash problem: sometimes, Flash elements don't play in my browser window - there's just a big white area where my Flash should be. I have to close and re-open Firefox. This especially happens when I activate the "Flashblock" plugin, a very useful tool that blocks all Flash unless you click on it and choose to play it. Whenever I have that enabled, most of the time, clicking on the "play" button produces the white area where the Flash object should be. It's Karmic 64 and Firefox 3.5, Shockwave Flash 10.0.
View 2 Replies View Relatedhere is what is in my file:
[code]...
i have xterminus installed. i also have a white block over the first letter in my username and when i begin typing, the 'block-type cursor' just leaves full white spaces behind and i cannot read my text at all. even when i delete back over the white spaces, they stay whited out.
I installed compiz on squeeze. I followed the steps on [url] , everything seems fine except my gnome-terminal shows me a white-in-white screen, seems like both the background and foreground are white, I tried to change the gnome-terminal profile, it doesn't work, after I disable compiz, gnome-terminal back to normal. I tried to install xterm, it can work, but it not easy to use for me, I still want to use gnome-terminal,
My laptop is lenovo Thinkpad T400. 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
I"m running an online radio station and would like to run my headphone audio into my microphone or a virtual microphone, either way, I would like my audience to hear what I hear without having to hold the Mic to the speakers.
View 2 Replies View RelatedMy setup:
HP XW8200
2x 3600MHz Xeon CPUs
4GB RAM
Quadro FX3800 PCIe graphics
Dual boot Ubuntu 10.10 32bit (primary use) and XP (gaming use only)
The issue I have is that the CPUs seem to run at 100% constantly in Ubuntu meaning that the CPU fans are constantly at high. This makes the machine sound like a wind tunnel!
It is nice and quiet in XP.
I installed GKrellM monitor which is what is telling me about the 100% CPU useage.
Would using the 64bit Ubuntu make any difference? (dont really want to reinstall tbh)
I have an install of Mint 9, and the fan runs a lot less then it did in Vista, but it still is way to loud because it's not very warm at all. I was wondering if there is a tool for Ubuntu/Mint that you could adjust this issue. It would be nice if it was a gui tool, but anything will do, because it's really bugging me.
View 1 Replies View RelatedSince about a few weeks, I have a problem with the sound on my Ubuntu Jaunty 64-bit. From any application it would simply provide noise instead of the real sound. The motherboard is working fine and providing sound under Vista. Initially, I then managed to change the settings in System-> Sound from Auto to one of the options, which provided for a decent test result. Now this is not working anymore either ... so I only get noise out of my speakers.
View 1 Replies View RelatedIs it possible to keep the hard drive off most of the time, so that the laptop runs silently? (The fan has been taken care of already. Are there any other noise sources?)
I have no practical knowledge about this, but in theory it should be possible to cache frequently used files in RAM and to store disk writes on a flash drive...? UnionFS?
I'm running the latest version of Ubuntu and have been for a while now without issue. However today (actually now yesterday) i made the giant mistake of upgrading my on board HD3150 graphics to a PCIe HD5570 since then my whole life has fallen to bits.
First i noticed some visual noise on the screen. Concluding this was due to incorrect or out of date drivers i attempted to update them from the Hardware Drivers section. This gave the error:
SystemError: installArchives() failed
Activating from the command line using jockey gave the same error.
Deciding a reboot might be needed i did so. On power up all ubuntu and recovery modes produced an unskinned GUI with no desktop icons that responded to no mouse or keyboard input.
I was forced to reinstall the operating system.
On reinstalling and losing everything i had installed previously (it's going to take many days to get that all back and working again!), i still have the screen noise, have still been getting the same errors on attempting to activate the drivers, except now i also get this:
the installation of this driver failed.
Please have a look at the log file for details.: /var/log/jockey.log
Code:
2010-09-22 01:40:58,589 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xa332aec> about HardwareID('modalias', 'usb:v045Ep00E1d0007dc00dsc00dp00ic03isc01ip02')
2010-09-22 01:40:58,589 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xa332aec> about HardwareID('modalias', 'usb:v046Dp0804d0009dcEFdsc02dp01ic0Eisc01ip00')
[Code]....
Is there a way to filter static or noise out of an mp3? I have avidemux and audacity but I'm not sure how to go about it, or if its actually possible.
View 5 Replies View RelatedHow do I fix the clicking noise after the HP splash screen?
View 6 Replies View RelatedI am dual booting Windows 7 and Ubuntu 10.10. When I am on Windows 7, I have no noise from the hard drive. When I use Ubuntu, every now and then I hear a short scratch noise from the hard drive. It didn't start doing it until installing Ubuntu when I was setting up the partitions.
View 9 Replies View Related