It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 RepliesI just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
Perhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
We have a PC in the office to which I have been granted to install Ubunto 9.04 on it. It has an intel graphic card Q45/Q43 Express Chipset.
I will proceed with the installation in a 1-3 weeks but I am expecting to have problems related to the graphic card not being seen or not configured ok.
Can you tell me how to configure it and what would its xorg.conf look like ?
Until I do the installation, I can use the Live-CD to test out your suggestions or do queries.
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.
I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
I'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
I've seen a bit about the display being frozen on intel integrated displays, but I do not see the answer anywhere. Does anyone know how to fix this problem: Ubuntu 9.10 boots and runs just fine for 10, 20 or even 30 minutes performing variety of tasks. Then, without warning the display is frozen. The mouse can move the pointer just fine, but I cannot interact with the desktop and the machine must be shutdown by holding the power button.
I've observed this while playing a Kpatience game, general surfing of the internet, and view ..... videos. One time it happened when the display powers off after being idle, but this is not consistently the case. I have tried to make the freeze happen, but am unable to do so (so it seems, anyway). What is happening here? Here are the details of my system:
Dell Dimension 2400 Desktop
Output from lshw:
*-display
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[Code]...
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
I have ubuntu 10.04 on an acer aspire with the Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller. According to glxinfo | grep direct, direct rendering is enabled. I'm trying to watch some anime films in .mkv format. I have tried vlc and the stock ubuntu player. The video is choppy with lag between audio and video. How I can diagnose the problem?
View 2 Replies View Relatedmy onboard soundcard (hda-intel ALC662) is not recognized in my new computer. It works fine with other distros, but ubuntu just does not seem to find it:
cat /proc/asound/cards
--- no soundcards ---
lspci -vvnn:
[code]....
I've got: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller as vga screen, and I would like to be able to change brightness and contrast.
View 1 Replies View RelatedAbout a year ago, I installed ubuntu on my ThinkPad X61, which was running windows. I basically just overwrote the hard drive, assigning one partition to the install. The graphics have always been a little buggy when it comes to 3d rendering or flash. Flash graphics flicker a lot and 3d rendering leaves trails or doesn't show up at all. Is there a way to configure the graphics card? I'm completely unexperienced when it comes to graphics cards and don't know where to start. I don't even know how to access its settings.
View 1 Replies View RelatedI have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies View RelatedIs it possible to to print to a printer on a netport express 10/100 over the internet ?
I have printing working from all computers on the same internal network as the netport express.
But I have two phone lines with two routers / ISP's
And I would like the computers on the other network to be able to print the the first networks printer.
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I own a Toshiba Satellite P300-19F laptop equipped with an onboard bluetooth chipset. Under Windows I can use the bluetooth technology flawlessly. Unfortunately, Ubuntu Lucid Linx does not recognize my BT chipset. Is there a way to use the windows driver as ndiswrapper does with wifi drivers?
View 1 Replies View RelatedCould people with Chipset : Intel i945PM confirm whether they can use 4Gb ram. I came across lot of posts that their sys will not go beyond 3.2Gb even when they use PAE enabled kernel or 64bit OS. I have this chipset and 4Gb ram and does not matter what I use it will not show more than 3.2Gb. I know that lot of 1st gen netbooks used the same chipset.
I read on some forums that it's a chipset limitation, but intel documents do not say this instead they say that it should support up to 4Gb.
Do you guys remember the inability for lucid to boot with some intel graphics cards?
http://ubuntuforums.org/showthread.php?t=1466337
http://ubuntuforums.org/showthread.php?t=1472282
Anyway I used a workaround to get it working on my Toshiba Portege laptop. However from it stemmed slower graphics, no splash, et cetera. That didn't worry me too much. However, I am now at the stage where I am getting arrays of different issues (that don't necessarily relate) and I would like to just have a nice clean install. I have been upgrading since 8.something and I long for freshness. My files are allready off.
Has anyone patched the kernel or anything? I'm purely a newbish end user and have not been following launchpad or anything. I did the workaround the week of the release. any fixes floating around? If not, I'll go back to 9.10.
I've got a Laptop with Intel video chipset. I've got a full slackware 13.37 installation and I'm using the huge-smp kernel all though it's not recommended. But I don't think the issue is kernel related. The problem is that it detects that there is a monitor connected to the s-video connector, but there is no picture on the screen. It doesn't matter what mode I use, but ideally I want cloning.
What happens when I use KDE and krandertray (or system-configuration for that matter) is that I can choose resolution and everything but no picture shows up on the TV. When I press the "Identify monitor" (Or something) button both the "1 TV1" and "2 LVDS1" shows up on the same monitor (laptop). That is weird.
Has anyone experienced anything similar or could point me in some direction as to what could be done?(I haven't had the chance to test modifications to xorg.conf quite yet, but I guess that should work. However, I think it's worth it to get rid of this bug)
How do I know if my intel chipset graphics card thing is installed?.
View 1 Replies View Related1. Sometimes when I try to shutdown my computer the display becomes filled with pixels of different colors as shown in the image (The problem is very random so I was not able to take a photo, I tried to recreate the effect using GIMP). Then the display turns off (Analog power saving mode) But my system never turns off.
2. While working on my computer the display sometimes goes kaput and blinks as in the second image. It stops responding completely I am not even able to go to terminal (Ctrl + Alt + F1). Leaving me with no option but to use the reset button. Causing me to loose all the work in progress.
3. Firefox responds very slowly upon closing it takes 5-6 seconds for the window to close.
PS:- KMS is also disabled in my system. Enabling it didn't improve stability. and here is the output of my videocard (lshw)
*-display UNCLAIMED
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[code]....
I have an HP Pavilion laptop running Xubuntu 11.04. It has an Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) chipset. The driver I'm using is a vesa driver. I ran a check from compiz-check.com to see if my computer could run compiz and it said that I don't have the right driver to run it.It asked if I wanted to check for any proprietary drivers, I ran the check and it came back with nothing. I used to have Ubuntu 9.10 on this same laptop and it ran compiz no problem so I'm a little confused why it won't work with the newer version. Is there something I'm missing? Maybe another driver out there I can try? And if there's really nothing I can do, is there anything out there comparable to compiz that my computer could run? I've been hesitant to upgrade from 9.10 because I ran into this problem with 10.04 so I went back to Karmic and stuck with it until they weren't updating it anymore.
View 2 Replies View RelatedNew to Ubuntu. I've read all I can about the current mic issues with the Lucid 10.04 release. There does not seem to be any specific threads dealing with the GM45 chipset. I've had sound out of speakers on fresh install, and have done every single line addition (individually) suggested with:
[Code].....
I have a TP T400 and wanted to use a bit of Linux. Installed Ubuntu 10.04 in my notebook using Virtualbox. The problem is that it doesn't recognizes the video chipset, which is a X4500 integrated graphics. After booting I receive an error msg saying that my video is not recognized and asks if I want to fix it. Dunno how to do that, so I cancel. After that I can only use 800x600, wanted widescreen (1440x900). Is there a simple way to fix it? Liked Ubuntu, wanted to use it.
View 4 Replies View RelatedOk a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
im having problems finalizing the installation of fedora 10 on a new ASUS P5E-VM that uses Intel G35 chipset.
1. i think fedora did not recognize the video driver since all the installation was in text mode and i cannot use "init 5" to load a UI
2. i tried to find some drivers (if any1 can recommend a rpm that i can download i will apprichiate it very much) but could not transfer them to the fedora since i could not mount any USB disk on key in the linux i tried using: mount -t vfat /mnt/usb (after mkdir /mnt/usb)
3. i tried to burn the driver but then could not access the dvd...
4. no internet connection yet... but thats because i cannot access my network drives that are on the USB key as well...