Fedora Hardware :: Intel ICH7 Alsamixer Won't Remember Volume Levels
Apr 15, 2011
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies
ADVERTISEMENT
Mar 28, 2010
I don't really now where this goes but figured i start in the general forum, mods please move as needed.I got my f12 install up and running great. I recently burned an audio cd. when i used it in my car i noticed i had to turn the volume up a lot more then on my other burned cds. previously i used my mac to burn cds. the mp3 files are the same, they are located on a external hd that both computers access. the difference is significant. any ideas on why this is?
View 4 Replies
View Related
Jun 30, 2011
Technically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 Replies
View Related
Feb 14, 2010
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.Here what it looks like:
Code:
$ alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
I've also tried Ubuntu and OpenSuse latest LiveCDs, both 32 and 64 bit - the result is the same alsaconf does not help.I'm totally puzzled and will be gladfull for any hint.
Additional info:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 0/1
[code]....
View 9 Replies
View Related
Dec 13, 2010
I seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
View 2 Replies
View Related
Aug 23, 2015
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
View 4 Replies
View Related
Aug 31, 2011
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies
View Related
Feb 17, 2010
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
View 8 Replies
View Related
Jan 5, 2010
I am using UNR 9.04 with Alsa 1.0.22.1 For some reason everytime I reboot my volume levels reset to headphone & speaker muted and headphone/speaker/PCM levels all set to 0%.
Does anyone know if there something I can that will allow my levels to be the same after I reboot? or if there is a script out there that will set my levels on startup?
If there isn't a script what would I do to create my own? also what would I do to have it auto run at startup?
View 3 Replies
View Related
Apr 24, 2011
I have a rather extensive mp3 collection.
The problem is some of the songs are louder than others, in other words set the volume and next thing a song comes along that scrambles your brains it's so loud, Or you get one you can't hardly hear.
I've used a couple of GUI's in the past, but all of them seem to do one song at a time. Not really an option with over 10,000 songs.
What would be nice is if I could pick one song as a base line and using terminal run a batch of say 500 songs through it.
Running 10.10 2 gig of memory
Use Rhythm box to handle music currently.
Been using since Dapper Drake, I'm not afraid of the command line, but I am far from an expert user, in other words I know just enough to be a danger to myself and others
I've never written a script file to automate anything but this may well be a time to learn one.
View 5 Replies
View Related
Jun 19, 2011
I am not getting any sound with rythembox. My sound levels are mute with some of the bars in alsamixer. I do not know how to adjust the bars to unmute, or to raise the sound once unmuted.
View 1 Replies
View Related
Mar 23, 2010
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
View 3 Replies
View Related
Sep 29, 2010
I just recently installed ubuntu so I'm quite lost on some stuff. This little annoyance comes from the volume levels in Ubuntu 10.04. I have partitioned my computer to have dual boot into windows and ubuntu, so I know the problems are not related to the hardware itself as everything works just fine in windows. I am using a Dell Inspiron 9400, for reference.
The multimedia keys on the computer respond correctly but on the lower three volume settings sound completely drops out as if I had muted the computer. I went into the Alsa mixer to see if I could configure these sound levels and sure enough the master volume was down to zero, PCM and LFE are also low . I changed the settings of the lower levels but when I press on the volume up or down media keys to switch level the settings get reset. I tried just changing one level, exiting and saving through alsactl but it didn't stick. Even after reboot the settings are back to the zero volume on the first levels.
View 1 Replies
View Related
Jul 14, 2011
alsamixer doesn't change the real sound volume of my USB sound card (though the dials move okay)
# uname -a
Linux RPN 2.6.28.10-rpn7.2 #1 SMP Tue Jun 7 07:23:01 EDT 2011 i686 GNU/Linux
# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[code]....
View 1 Replies
View Related
Jul 21, 2010
since updating my laptop to 10.04, I can't get any sound out of my headphones. If I plug the jack in, the sound from the loudspeakers turns off, but the headphones stay quiet.
I have run alsamixer and in fact the volume for the headphones is stuck to zero, and it's not possible to increase it.
My hardware config is posted here: [URL]
What I find funny, is that amixer reports that I don't have the capability of regulating the headphone volume:
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
I have also used the AlsaUpgrade script to get the latest version of alsa, but it still doesn't work.
View 8 Replies
View Related
Jul 7, 2010
I am currently troubled with a very annoying problem - the volume level of the PC is jumping higher and lower at random intervals. It makes listening to music very difficult, as at times the music can go from just right to overly loud, just to fall right down so that it is hard to hear. I've only noticed this problem in the past few weeks, and I can definitely say it wasn't an issue in 9.10. This is a fresh install btw, not an upgrade.
Some details:
Using motherboard sound, Realtek HD Audio, iirc. Below is the output of lshw, with the irrelevant parts cut out.code...
View 7 Replies
View Related
Aug 1, 2010
I've got a Toshiba L650, Debian testing/unstable, KDE4.4.5. The sound worked when I first installed everything (played a movie in dragon player, etc), but shortly thereafter it stopped working. It seems like the hardware is okay (all hardware is recognized, all relevant modules loaded, volume in alsamixer at 100%, the system beep -- set in the BIOS -- works), but I still can't get sound to play. Once or twice, right before KDE shutdown, I could hear the exit sound, but that's it. Last night I exited KDE (without hearing a sound), shutdown kdm, then:
mv $HOME $HOME.backup
mkdir $HOME
and restarted kdm and kde...still no sound! I created another user, and still no sound!
View 6 Replies
View Related
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
Apr 29, 2010
I've just switched to slackware from opensuse (and before ubuntu) for few days. Everything is ok , no, is awesome when I was doing my job on run level 3. However, I found there was no sound when I booted it to run level 4 (xfce) trying to play some music on yesterday. After googled a lot, I thought there must be some wrong with my alsa driver, because I couldn't adjust the PCM volume from either alsamixer or amixer. In fact, there is even no PCM section in it, but two sections named "IEC958" and "IEC958 D" instead with no "pvolume" capability. Here is some outputs:
Code:
bash-3.1# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 21
[Code].....
ps: I've reinstalled alsa-lib, alsa-oss, alsa-utils from the installation dvd, no use
View 9 Replies
View Related
Dec 13, 2010
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies
View Related
Sep 6, 2010
I noticed that one DVD I encoded to ogg (vorbis) resulted in files with varying volume levels (some files have sound much softer than others... and the original DVD is not like that). I wonder if it's mplayer or oggenc's fault. I do it like this (suppose):
Code:
for i in 01 02 03 04 05 ; do mplayer-vc null -vo null -ao pcm:filename=$i.wav dvd:// -title $i-$i; oggenc $i.wav $i.ogg; rm $i.wav; done
I'm doing it by memory so I could have a mistkate or two in the sequence of commands but the idea is very simple
- Output the sound to a wav file using mplayer
- Encode it with oggenc
- Delete the wav file.
Why is the result having varying volume levels?
View 1 Replies
View Related
Jan 5, 2011
My microphone wasn't working so I entered alsamixer to amp up it's volume and see what's wrong.Not sure what I did wrong but now the gnome volume control applet in the Indicator does not affect system volume at all.I can even mute it and it will not mute anything.The volume controls in alsamixer work fine and changing the volume in alsamixer affect system volume immediately.What could I have done? How can I get back volume control inside gnome?
View 2 Replies
View Related
Mar 5, 2011
How might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.
View 3 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Jul 10, 2009
I'm new to Fedora and must say I love it. Previous Debian and Arch user but feel at home now. I'm after a difinitive answer for this issue as I can't seem to find what I need anywhere. I'm running Fedora 11 kde 4.2.4 with an Epson Photo Stylus RX425 printer / scanner combo connected via usb. Is there any way to moniter the ink levels in this printer? I'm tearing my hair out.
View 9 Replies
View Related
Mar 1, 2010
I am running F12 and I use Amarok to manage/play my music library.
I keep having a problem where the mixer 'Surround' in my alsa volume gets maxed whenever I switch tracks in Amarok. I want to stop this from happening because it causes my speakers to buzz just loudly enough to drive me crazy.
I have an SB Live! 5.1 (emu10k1) card.
View 8 Replies
View Related
Oct 23, 2009
hHow would I add my SSH server to run levels 3,4,5? I have been trying to search google for this answer to my problem for hours and cannot have any luck.
View 2 Replies
View Related
Sep 11, 2011
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies
View Related
Mar 22, 2010
Because I am trying to use skype, I try to record my voice with a microphone.
I am working in FC12.
Code:
[gastonv@d5152011f ~]$ cat /proc/asound/cards
0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
Ensoniq AudioPCI ENS1371 at 0xec00, irq 17
[Code]....
View 4 Replies
View Related
Apr 4, 2010
This is pretty simple. I want to know if there is a way to save my settings in alsamixer. I hate having to have to access alsamixer everytime I boot my computer.
View 1 Replies
View Related
