OpenSUSE Multimedia :: Microphone Config With Onboard Sound?
Apr 12, 2011
I have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
View 2 Replies
ADVERTISEMENT
May 24, 2010
Dell Inspiron with dual integrated mics. I get no sound when i try to record with the integrated webcam. I have everything turned all the way up in the mixer, ie: mic, capture, mux, etc but still no sound.
View 2 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Aug 21, 2010
I have been trying to get my onboard sound working with OSS in gstreamer-properties when i press test i get sound coming out of my speakers, my onboard sound is recognised in ossxmix, but i dont get sound anywhere else. Onboard soundcard is Realtek ALC883
View 1 Replies
View Related
Mar 13, 2010
Ubuntu 9.10Code:$ uname -aLinux ubuntubear 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 GNU/LinuxI have ASUS M4A78-E motherboard. I've disabled Onboard sound card (VIA VT1708S) and installed Audigy sound card (c-media sb 8738 5.1 channel (CMI8738/PCI-6ch-LX)). But my system still detects Onboard sound card.
Code:
$ alsamixer
AlsaMixer v1.0.20 (Press Escape to quit)
[code]....
View 2 Replies
View Related
Dec 12, 2010
I use 64-bit Ubuntu Lucid. This machine has an onboard Nvidia sound chip (which can not be disabled in BIOS), I also have an Soundblaster Audigy 2 card, which i'd rather use.
Previously, this was impossible because Ubuntu could only configure the first card. However, with the event of 10.4 and the easy-to-use selector in Sound Preferences I was hopeful that it would work now. But no luck.
I should mention that this machine dual boots to Win XP, and the Audigy works like a charm there, so it must be a Ubuntu problem. The Audigy 2 card is detected by Ubuntu, and is selectable in Sound Preferences, playback is fine with no errors, the source appears in Sound Preferences, but no sound.
These are the steps I have tried, without success:
- Disable the on-board card in Sound Preferences
- Cranking all the sliders to max in Alsamixer
- Checking that there's no mute in Alsamixer, Sound Preferences, Volume Control
- Adding lines to the bottom of /etc/modprobe.d/alsa-base making the Audigy the default card (0), and the Nvidia secondary (1). The output of
Code:
Now reads:
Code:
View 3 Replies
View Related
Jan 14, 2011
Over the last few days I've been spending some time converting my headless web server into a media center running Boxee for our lounge.
I have managed to get *nearly* everything working with the exception of sound. The computer has onboard sound, both front and back ports, and I tried every combination of outputs and plugs.
I also checked it wasn't muted, or anything like that.
So, I wasn't able to get it working with the stock Ubuntu 10.10 stuff - I turned to Google and found a thread which suggested I download and install this.
I ran the ./install as root, and it took about 3 minutes to install everything. Rebooted and now I'm left worse off than before - this time I actually have no sound card even listed.
I've been thinking some more, and after another hour or two reading through random threads, I think it may have been a mistake to install those drivers.
I couldn't find a way to uninstall them, so I've been reinstalling all the alsa and PulseAudio packages I can find with no luck.
Now I'm stuck with doubly no-sound.
If I can't get onboard working then I'm considering buying a new graphics card with HDMI out (the current one has a hard time with Boxee), or maybe a dedicated sound card instead.
View 9 Replies
View Related
May 28, 2010
I use Ubuntu 10.04 but I had this problem in 9.10 too.
I have a problem regarding my sound preferences. I have a microphone and I want to use it to make calls. The problem is that when I speak into the microphone when a program like Skype is used, my sound suddenly crashes(The microphone won't take any input nor will I hear any sound from the speakers if I play a video or music. This gets fixed if I restart the computer). This also happens if I go to Sound preferences → Input or Output and edit something there.
If I don't make any of the above, the sound works just fine as I can listen to music and play videos.
I don't know much about computer hardware but here is some info about my sound card:
Code:
VIA Technologies, Inc. VT1708/A[Azalia HDAC] (VIA High Definifion Audio Controller) (rev 10)
Subsystem: Biostar Microtech Int'l Corp Device 820f
View 9 Replies
View Related
Oct 7, 2010
recording defaults to my microphone but I want to record sounds directly from a application.
View 4 Replies
View Related
Jan 4, 2010
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies
View Related
Sep 23, 2010
I have a zoom H2 and I intend to use its usb microphone function.I connected it and it seems to work with xvidcap if I declare /dev/audio1 as the input device. Well.I want to go further and use it for other purposes and before installing jack and other applications I would like to understand why it does no longer appear in the "Sound preferences" under the 'input" and "hardware" tabs as it was the case the day before.
View 1 Replies
View Related
Nov 26, 2010
How can I echo the sound from the microphone to the speakers?
I.e., anything that is picked up by the microphone is played on the speakers immediately, without recording anything. Preferably with the ability to increase the volume.
View 3 Replies
View Related
Dec 3, 2010
I recently manage to make my microphone "work". I open the alsamixer and i unmuted the mic. Easy!!! But as i can hear my voice through the speakers i can't record. Actually i compare the alsamixer with the sound preferences. And what I notice is:
i)When i mute the output volume from the sound icon in the alsamixer is also muted.
ii)The same when I increase or decrease the volume.
iii)But in the input tab if I mute increase or decrease the volume nothing happens!
I can only mute unmute and change volume trhough the alsa mixer!
I use an Fujitsu siemens amilo pa 1510 with ubuntu 10.10 which I install from a pendrive.
View 9 Replies
View Related
Jan 21, 2011
I've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
View 3 Replies
View Related
Jan 2, 2011
I should create the bridge between a linear input and output. It is desirable, with possibility to impose effects on a sound. (But it isn't obligatory)
Alsamixer:
lspci | grep Audio:
Quote:
egor@egor-ubuntu:~$ lspci | grep Audio
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
[code]....
Alsa and PulseAudio was installed from PPA.
View 1 Replies
View Related
Jun 17, 2011
I have no sound input from my microphone. With a fresh install of 11.4/gnome desktop it was working.
Then all I did was installing the multimedia support from the script in the opensuse guide (which interestingly includes some files for k3b so I suspect there is a conflict of libraries now that some kde libs have been installed) and a full system update. After that, my mic has stopped working.
If it helps at all, the output of the ALSA Information Script at my machine is hosted at: [url]
View 5 Replies
View Related
Jun 3, 2011
I run ubuntu 10.10 with an 870-g45 motherboard which contains a VIA VT1828S integrated sound chip with 8 audio channels as it states on [URL]... I am having issues with getting microphones to work properly on my computer. Sound output works great but microphones don't. I've noticed when I tested mic's on the sound configuration it would act like it gets input but it would be choppy or laggy sound. Anytime i talk to people on voice chat they say my voice sounds like it keeps clipping in and out and they can't understand a thing I say. I have tried looking on google but any fix I looked at didn't seem to work for me. I don't know if it's motherboard related
View 6 Replies
View Related
Oct 12, 2010
In understanding with Fedora logs are trying to tell me and if I need to adjust some settings on my system to address these issues.
The system motherboard (Gigabyte GA-MA785GT-UD3H) has onboard graphics. I understand that some of the system RAM is taken up by the graphics subsystem.
Very occasionally, I am seeing Nautilus and some other apps crash with SIGSEGV errors. Also, on the couple of occasions, parts of the display started going black - minimising and maximising the window redrew the area as before. This appears to be to do with memory access issues. I have already tested my RAM, applied the latest BIOS update on the mobo. I'm trying to understand if this is some sort of memory access violation that is resulting from the Linux kernel going off and accessing the wrong parts of the RAM and if there is a way to tell it that the graphics and system areas of the RAM are separate, through BIOS settings or kernel parameters and such?
Some questions:
1. Is my system using AGP? I don't think so. I understand AGP is on its way out. So what does the below log output mean wrt AGP?
2. Which part of the log is actually describing the memory assignment for the graphics memory?
3. Would it be of any use trying iommu=noaperture here? I am trying this out, but I don't understand if it is helping in anyway.
Have done a Google search and read on AGP, iommu, shared memory for graphics, but their interaction with each other at the hardware level and how Fedora is handling this is not sinking into my dull brain.
I have put up the system configuration, BIOS settings, logs etc for your perusal here [url]. Parts that caught my attention are highlighted.
Now, onto the bits that has my attention:
Code:
Code:
Code:
No AGP bridge found
Code:
Code:
Code:
View 2 Replies
View Related
Aug 31, 2011
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies
View Related
Jun 13, 2010
I have had this problem for far too long, my onboard sound will not work, i went from Xubuntu, to Vista now to here! NO the mute is not on, it says i have sound but I dont! I did the lspci command and got this:
ALSO I have a custom built computer that came with a Rocket Fish sound card model RF-51SDCD that I rip out (no known drivers for that sound card). I have a Compaq Presario 061. Model number is DT076A-ABA S6200CL NA410. My motherboard is an ASUSTek Kamet2. The firmeware is Phoenix Technologies version 3.05 (cant find an update for that either).
View 9 Replies
View Related
Jan 23, 2010
Mp3s are playing nicely, so does the test sound with Yast. I copied some outputs which you might need to help me figure out whats wrong with my settings.
The motherboard has an onboard sound chip (which I do not use), and I am actively using the PCI sound card (Aureon 5.1, CM8738).
The microphone is coming with the webcam Logitech E 3500 (which worked under 11.1, but updating to 11.2 keeps me without skype functionality).
View 9 Replies
View Related
Sep 8, 2010
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies
View Related
Nov 15, 2010
I would like to plug my guitar on my pc and hear what I'm playing out of my headphones. I have not found out yet how I can enable direct output. Neither with Line-In, nor Mic-Input worked. Has anyone an idea how to enable it? KMix does not provide such a function as far as I know
View 7 Replies
View Related
Mar 24, 2011
I did, what one should not do: I changed a running system. I removed a PCI sound card, replaced a damaged DVD+RW drive and upgraded to Slackware-current (Slackware 13.37 RC-3). The mainboard is an MSI KT4V with VIA8235 onboard sound. Now, my problem is a bit weird: Everything seems to work just fine. E. g., programs like speaker-test, play and aplay show no error message. In fact, they seem to be able to play sound. E.
Code:
play /usr/share/sounds/pop.wav gives no error message. But: I don't get any sound out of my speakers.Here is some additional information. I'd be really grateful, if someone could point me to relevant information or useful advise, what this problem could be caused by.
[Code]...
View 9 Replies
View Related
May 7, 2010
I'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
Code:
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
View 2 Replies
View Related
Mar 4, 2010
I have a motherboard p5bvm-se with 82801H (ICH8 Family) HD Audio Controller. The sound in earphones playing. Sound from the microphone is recorded and reproduced in KRecord => microphone is working. ssv:~ # uname -a Linux sslesarev 2.6.31.12-0.1-default #1 SMP 2010-01-27 08:20:11 +0100 x86_64 x86_64 x86_64 GNU/Linux
[code]...
I installed skype skype-2.1.0.81-3.1-x86-64 from build.opensuse.org/home:matteotomasoni or skype-2.1.0.81-suse.i586.rpm from [URL]... Microphone does not work in skype!
View 9 Replies
View Related
Nov 1, 2010
I'm trying to make the microphone work on an Asus G1S. Neither the internal analog microphone nor the external one is recognized. 50-sound.conf in Modprobe.d has :
options snd slots=snd-hda-intel
# u1Nb.ULiNFUWt9WF:Asus M51S series
alias snd-card-0 snd-hda-intel
[code]....
View 9 Replies
View Related
Jun 25, 2011
My laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
View 1 Replies
View Related
Oct 8, 2010
I have a system with an on-board S/PDIF output (the one I want to use) and a ATI graphics card that has an HDMI output and therefore an own audio device./proc/asound/cards shows me the following:
Code:
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f8000 irq 16
[code]....
View 4 Replies
View Related
Feb 17, 2011
I am new to Linux and ran into a problem with no sound after a fresh install of Debian 6.0.
Here is what I get from my I/Os. (yes speakers are on, plugged in and all volume controls have been toggled and tweaked in every which way.)
Code:
View 1 Replies
View Related
