I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies View RelatedLets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
I'm on 5.4 with a Shuttle X50 and am having a lot of trouble getting sound working on this box. In Gnome the card is detected properly and nothing is muted, but no sound comes out of the speakers when I do the test. Checked in the bios and the audio is enabled so I'm stumped... heres some info for reference:
[Code]...
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
It always fails when I try the sound card test. It says like the system cant detect the sound card.
Sound Card: 5 series / 3400 series chipset high definition audio
Module: snd-hda-intel
After searching about the issue, I found the information that installing kmod-alsa-PAE-1.0.20-1.el5.elrepo.i686.rpm and kmod-alsa-1.0.20-1.el5.elrepo.i686 would solve the problem.
But even I downloaded and installed them, nothing changed.
== BEGIN uname -rmi ==
2.6.18-194.17.1.el5PAE i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
elrepo.repo
epel.repo
epel-testing.repo
mirrors-rpmforge
rpmforge.repo
rpmfusion-free-updates.repo
rpmfusion-free-updates-testing.repo
rpmfusion-nonfree-updates.repo
rpmfusion-nonfree-updates-testing.repo
== END ls /etc/yum.repos.d ==
== BEGIN lspci ==
~
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
~
== END lspci ==
== BEGIN lspci -n ==
~
00:1b.0 0403: 8086:3b56 (rev 05)
~
== END lspci -n ==
I've recently installed 11.4 with KDE SC on my Eee PC 1015 PED netbook. I've had absolutely no problems with it, but after a reboot the speakers have stopped playing, I can only hear audio via headphones. I tried many settings in systemsettings and YAST, but nothing helps. Here's all the info I need to provide, according to the sticky thread:
The link from # alsa-info.sh: [URL]
The rest:
Code:
# rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.24-6.1.i586
alsa-firmware-1.0.24.1-3.1.noarch
alsa-plugins-1.0.24-6.1.i586
alsa-oss-1.0.17-32.1.i586
[Code].....
I'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
I'm having trouble getting my microphone to work. Here is my sound card:
:~$ lspci | grep Audio
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
I've installed pulseaudio but I still cannot get any sound through the mic.
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
Yamaha 754 is not working with alsa and working with OSS Whats the problem
[Code]....
Technically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 Replies View Relatedwhere i can find a driver for Multimedia audio controller: nVidia Corporation nForce2 AC97 for Linux
View 5 Replies View RelatedI seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
This is a Dell Optiplex 380 desktop with an ICH7 family 82801G sound card. If I install openSUSE 11.3 or HIGHER, the OS will properly auto-configure the card and the sound is fine. However, 11.3 or higher also has an issue playing back full-screen flash video as well as 11.2 (may be a 64-bit related issue?). I suspect that the problem lies somewhere in the fact that this PC was produced considerably after the release of oS 11.2 so it's not detecting the card right.
I have gone so far as to enable a repo newer than the SUSE version to attempt to upgrade the ALSA components. I guess what I can do is throw in a live CD for 11.3 or 4 and go into YaST or 50-sound.conf and try to see what's going on or just copy it to a flash drive. I have a feeling that might get me farther than jerking around with this any longer.
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
I am having hard time playing a high definition video file (.mp4), the video initially plays fine, but after 5 mins, it starts to skip and stutter, (I use Movie Player with some codes that Ubuntu installed when I first tried to play file) I have a Dell XPS M1330 Intel Core Duo @2.20 GHz with 4 GB RAM.
View 4 Replies View RelatedI have an issue with my Sound on OS 11.2.It is correctly recognized under hardware and the driver seems to start properly as well when I do rcalsasound start.But under Control Center / Sound Preference there is no audio hardware listed (and hene no sound playing)
View 3 Replies View RelatedI am new to Linux and ran into a problem with no sound after a fresh install of Debian 6.0.
Here is what I get from my I/Os. (yes speakers are on, plugged in and all volume controls have been toggled and tweaked in every which way.)
Code:
I am like almost everyone, watching videos on ..... and I am having problems with flash. When I put a video on - even if high definition or not I still get a studder from flash. The video plays but it keeps chopping up and you can see on some frames how the next frame moves on the bottom of the screen and the previous frame is still stuck on the top. Flash does not run smoothly at all - that is on every video. I am suppose to be on the latest flash version for linux off of addobe.
View 4 Replies View RelatedI have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.Here what it looks like:
Code:
$ alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
I've also tried Ubuntu and OpenSuse latest LiveCDs, both 32 and 64 bit - the result is the same alsaconf does not help.I'm totally puzzled and will be gladfull for any hint.
Additional info:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 0/1
[code]....
I am not able to configure ubuntu 9.04 on network ,
i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies View RelatedI upgraded from 13 to 15 using preupgrade, and suddenly I don't have any audio / sound. I tried pavucontrol but it shows no hardware device available; alsamixer do show the hardware, though, as "HDA Intel". I attached alsa-info output. Running lspci I go this as audio device:
Quote:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies View RelatedI recently received my new multimedia laptop - an HP Dv7. I proceeded to install Ubuntu 9.10 on it and I've had no end of troubles with the sound card including, muffled sound - seemingly only coming from the LFE channel, only stereo controls in pavucontrol, failure to send sound out the HDMI port, headphones not working and not cutting of the speakers when the headphones are plugged in.
I believe that all of this will be solved if I get the appropriate driver for my card. I have searched around and sound in particular has tons of posts from many people all with slightly different problems, solutions and hardware. None of the solutions seem to be working. Also I just tried booting from the live CD and the sound is the same - no 5.1 and just muffled sound. I think my sound card is just too new and there doesn't exist a proper driver for it yet.
Here's what I get with lscpi:
Code:
% lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
01:00.1 Audio device: nVidia Corporation Device 0be2 (rev a1)
I just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.