OpenSUSE :: After Update No Sound Intel ICH7?
Jun 30, 2011Technically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 RepliesTechnically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 RepliesI have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies View RelatedI seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
This is a Dell Optiplex 380 desktop with an ICH7 family 82801G sound card. If I install openSUSE 11.3 or HIGHER, the OS will properly auto-configure the card and the sound is fine. However, 11.3 or higher also has an issue playing back full-screen flash video as well as 11.2 (may be a 64-bit related issue?). I suspect that the problem lies somewhere in the fact that this PC was produced considerably after the release of oS 11.2 so it's not detecting the card right.
I have gone so far as to enable a repo newer than the SUSE version to attempt to upgrade the ALSA components. I guess what I can do is throw in a live CD for 11.3 or 4 and go into YaST or 50-sound.conf and try to see what's going on or just copy it to a flash drive. I have a feeling that might get me farther than jerking around with this any longer.
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.Here what it looks like:
Code:
$ alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
I've also tried Ubuntu and OpenSuse latest LiveCDs, both 32 and 64 bit - the result is the same alsaconf does not help.I'm totally puzzled and will be gladfull for any hint.
Additional info:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 0/1
[code]....
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies View RelatedI'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
Since upgrading to OpenSuSE 11.3 I no longer have sound.I remember having the same prob upgrading to 11.2, but for the moment, I'm at a loss.
View 8 Replies View RelatedI should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
I have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies View RelatedI was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies View RelatedI installed a fresh 11.2 and perform a Stable KDE update and a complete update with "Yast Online Update" and now there is no sound in my laptop.
My sound card is HDA Intel and uses snd_hda_intel driver.
Well, the gdm issue was pretty easy to solve. Just reinstalled NVIDIA video drivers in runlevel 3.
But sound seems to be a litle more dificult. Before I spend some hours, I would like to ask if some had the same problem.
By the way, here is my alsa-info.sh url.
after software update (124 packages) I cannot change sound volume and I cannot also mute it. Is there any way how to revert the changes or how to repair it?OpenSUSE version: 11.4 64bit
View 3 Replies View Related! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I just got Ubuntu 10.04 installed and I seem to be having a problem as many others with the sound. because a laptop with no sound tends to be a wee bit boring
Code:
I just did a clean install of Ubuntu 10.04 and the whole installation went fine.
My only problem is that I have no sound MB is Intel DG45FC.
I know the hardware is OK because I tried it in Windows (dual booting).
I just got installed ubuntu 10.04 in my HP laptop. But there is no sound in my speaker??
View 1 Replies View RelatedI think it's the HDA Intel anyway. In alsaconf it comes up with, 'hda-intel Intel Corporation 82801H (ICH8 Family) HD Audio Controller', and I select that one. When I do, 'aplay /home/emor/sample.wav' it says it's playing but I don't here any audio. I've tried various configurations on both the alsamixer and the graphical XFCE sound mixer, and neither have really done anything. [URL]...
[code]...
I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View RelatedI have tried issuing this command:
[root@C5 ~]# hdparm -a 256 -d 1 -r 0 -k 0 -u 0 -c 1 -A 1 -K 0 -P 0 -X 66 -W 0 -S 0 /dev/sda
/dev/sda:
setting fs readahead to 256
setting 32-bit IO_support flag to 1
[code]....
Note that setting most of the parameters fails - and it still appears to be in 16 bit PIO mode. Am I using the wrong tool here - or incorrect parameters - or are the results misleading? Is there some other interpretation?
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.
View 10 Replies View RelatedI have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies View RelatedI upgraded from 13 to 15 using preupgrade, and suddenly I don't have any audio / sound. I tried pavucontrol but it shows no hardware device available; alsamixer do show the hardware, though, as "HDA Intel". I attached alsa-info output. Running lspci I go this as audio device:
Quote:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
I am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...