I have been at this for awhile and i need to know which direction to go to enguage this problem.I am trying to get jnlp files to open automatically in chrome / firefox. Before you flame me, i have followed the instructions on the above "handy yellow link" to get java installed and set up.My goal is to click on "draw" at this link and have it open and run automatically in Chrome. [URL].. Nothing seems to happen when i click the link. From what i understand, i need jre 1.6. I sucesfully installed it from:[URL]..
I ran the alternative commands in the "handy yellow link" and selected 1.6. When i run "yum install java" i get the output: Package java-1.5.0-gcj-1.5.0.0-32.fc13.i686 already installed and latest version Nothing to do Probably just an alternative command that i'm unaware of, but i cant find a simple fix.
is there a common reason why modules get mismatched with the running kernel version?why do I always get that uneasy feeling like I'm headed in the wrong direction?
I just installed Squeeze on a 4 disk system, each disk set up identically with 4 partitions, with the last partition of each disk used for a raid 5 array. I used the squeeze installer, and chose the 'manual' partition option for this setup.
After installation, fdisk reports the ending cylinder number of each of the 4 disks as one more than the total number of cylinders for the disk. I've never seen this before. In the past when I've used fdisk to manually partition disks, the final cylinder number was always equal to the total number of cylinders.
The disk has 60801 cylinders, and the 'End" cylinder number for /dev/sdd4 is reported as 60802. I would have expected it to be 60801. Is this a bug or problem? It's working OK, but I don't know if it will cause instability in the future.
I've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
I am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
I'm trying to sync a folder between my Windows install and my PCLinux install. Same machine, Windows 7 on the C drive and Linux on an external USB hard drive.
Using the Grsync GUI, I searched for the source and destination folders, and then executed the command. Here is the output:
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
i need to install nagios-plugins 64 bit, when i tried to install via yum i got this error yum install nagios-plugins.x86_64 yum error Unsatisfied dependency i hv installed openssl 32 bit but it needs openssl 64 bit, even php and perl. i tried to to install via yum yum install openssl.x84_64 but its not getting installed i tried to uninstall openssl but its shows so many packages to remove
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
GNU Emacs 23.1.1 I've noticed that if I run Emacs and M-x server-start, I can use the emacsclient program as usual, but if if I start Emacs using emacs --daemon and then try to use emacsclient the new frame locks up and the shell outputs *ERROR*: Arithmetic error. This issue doesn't happen if I use the -t flag to force terminal mode when running emacsclient.
I am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
I hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
i have installed nagios in centos 64 bit. but i get this error CHECK_NRPE: Error - Could not complete SSL handshake. i have totally 10 hostgroup definitions. but i'm getting error for only 3 hostgroup definitions other 7 are working fine.
My brother has Tri boot Ubuntu ,7 and Vista ..GRUB2 is the bootloader..The problem : At boot after the Lenovo splash disappears , there appears some 4 to 5 lines of error , error:syntax error GRUB or similar..This is visible only for a fraction of a second before the GRUB2 menu pops up...
The OS es load properly on selection in the menu so no loss of functionality One another problem is there is no OS highlighted by default and the timeout message "Automatic Boot in 10 Secs" does not appear Reinstalling GRUB does not solve the issue
I am running Fedora 15 and want to add a network printer (Brother HL 2040) on a Win pc reunning XP pro. Fedora finds the network printer, shows that is shares, but when I try to finish I get the above message. I have emptied the spool file of the test page I tried earlier and nothing but the tmp file remains. Anyone have any suggestions?
My ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code: $ soundconverter SoundConverter 1.4.4 using Gstreamer version: 0.10.28, Python binding version: 0.10.18 using gio
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old 2- replace it with all the backups located in /var/backups/
I am installed cUrl from http://packages.ubuntu.com/lucid/amd64/curl/download for my ubuntu 9.0 with php 5.2 ,Apache 2.0.It was installed by gkebi package installer. but when i display phpinfo() curl not found since i was attempt to use phptwitter class. what is the proble i have? When i am trying to install again package installer shows same version of curl already found, but phptwitterclass shows following error 'Method "curlQuery" of class "Twitter" reported an error: CURL library not installed.'
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
