I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
Using rsync, which switch will allow rsync to suppress the "skipping non-regular file" messages in the output while still being reasonably verbose for everything else?
View 1 Replies View RelatedI regularly rsync directories to an external usb drive. Recently I've started getting errors which look:
blah blah:Read-only file system (30)
The external usb drive has two partitions (ext3 and fat32) and I rsync to the ext3 one. The rsync command is
rsync -ahi --delete /home/mike/some_dir /media/usb_drive
People have reported this error with faulty usb cables but everything was working fine until recently so it seem unlikely a usb cable would suddenly wear off.
When I first got Ubuntu a few weeks ago, and got the older version of Wine from the Software Center, and it could run pretty much any game I wanted. Albeit really slowly. Well, I upgraded to 1.2 using the instructions on the wine website, and now a couple of my low-power games (like Bootfighter Windom XP) run totally perfectly, but a lot of mainstream games like Mirror's Edge and Mass Effect 2 just crash when I attempt to open them, and all they all have the same message where the main .exe file has "encountered a serious error." Here's what the terminal gives me:
Code:
Backtrace:
=>0 0x68286bbe in libc.so.6 (+0x110bbe) (0x033bd9c0)
1 0x693815a1 in winhttp (+0x115a0) (0x033bea20)
2 0x69381aa1 WinHttpQueryDataAvailable+0x60() in winhttp (0x033bea70)
0x68286bbe: fmull 0x488bdc4a(%ecx) .....
I'm installing a NVIDIA driver and encountered some error message. Please see below the sequence (I've set runlevel to init 3);
linux:~/SuSe # rpm -ivh NVIDIA_GLX-1.0-4191.suse81:i586.rpm Preparing... ############################ [100%])file /usr/X11R6/lib/modules/drivers/nvidia-drv.o from install of NVIDIA_GLX-1.0-4191 conflicts with file from package XFree86-server-4.3.0.1-21
I'm trying to sync a folder between my Windows install and my PCLinux install. Same machine, Windows 7 on the C drive and Linux on an external USB hard drive.
Using the Grsync GUI, I searched for the source and destination folders, and then executed the command. Here is the output:
** Launching RSYNC command (simulation mode): pkexec rsync -r -n -t -v --progress -s /media/Win7/Documents and Settings/Paul/Application Data/The Word file:///root/.wine/drive_c/Program Files/The Word/myData
ssh: connect to host file port 22: No route to host
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7]
Rsync process exit status: 255
It seems to be doing an FTP operation, whereas all I need is a file transfer. Can anyone point out my error here?
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View Relatedi am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
For backup purposes, I have been trying to find out a solution for Rsync -avr sourcefolder targetfolder with Skipping 0 bytes files option.
However it seems that they are no solutions. Would someone have an idea, to skip to source files into the sourcefolder that have no content, ie. 0 bytes?
I've been trying to get soundconverter to work on ubuntu 10.10, I've checked I've got all the restricted packages installed, gone into synaptic and installed a bunch of gstreamer stuff, downloaded and compiled the latest version of soundconverter but whatever I do, the following happens:
1. open soundconverter
2. open file (wav)
3. set to convert to mp3 (default)
4. Click convert and instantly get the ever so helpful "general stream error" message!
I have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
I got the error: "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have edited the options in installation screen with adding noreplace-paravirt at the end of boot parameters. but still have this error and FC installation does not continue.
View 11 Replies View RelatedI am trying to run Fedora 14 from Virtual PC 2007 on Windows XP. Every time I try to boot it, it flashes some code and shows a blue screen with the Fedora logo for a fraction of a second. It goes to an ms-dos type screen with a white background and a single "[" in black. Then I receive an error saying "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have googled many times and have scavenged the Fedora site for a solution, yet I have not found one for Fedora 14.
View 3 Replies View Relatedwhen i use rsync command to backup my image file , it shows the following error message.
bash: line 1: /usr/bin/rsync: Argument list too long
rsync: connection unexpectedly closed (0 bytes received so far) [receiver]
rsync error: remote command could not be run (code 126) at io.c(463) [receiver=2.6.8]
The command which i used is rsync -avrl -e ssh cms@server:/data/cms/data/images/* /mnt/Backup/Intranet_cms_backup/images
Hello. I use dvd::rip 0.98.10 to create .wav sound files from DVDs and then play them in Totem Movie Player 2.28.2 (using GStreamer 0.10.25) mainly because I like the visualizations. It always used to work, but a recent batch will not play. I get: GStreamer encountered a general stream error. I probably used a more recent version of dvd::rip for the ones which don't play. Both MPlayer and VLC Media player plays them without a problem and older rips play fine in Totem too. The Audio/Video properties of a 'faulty' file (as shown in Nautilus) are greyed out for codec, channels etc., whereas a 'good' file shows Audio properties as Uncompressed 16-bit PCM audio etc., but running soxi on a good or bad file gives the same (good) results. I'd like to get this working, without doing anything to the .wavs preferably, so I guess I need to do something to Gstreamer, but I'm really not sure how to proceed. I'm using Linux Mint 8 64bit (rt kernel) and very nice it is too.
View 1 Replies View RelatedI have installed Ubuntu 10.10 server on vmware and trying to install webadmin but no sucess. Tried few guides but when I do dkpg -t webadmin_1520_all.deb the terminal says Quote: dkpg: error processing webadmin_1.520_all.deb (--install) cannot access archive: no such file or directory errors were encountered while processing webadmin_1.520_all.deb
View 2 Replies View RelatedI would like to know if what this log error mean and how i can resolve this matter. I would like to verify if this is a misconfiguration or a bug on my settings
the log error is:
snmpd:error parsing ', skipping
the RHEL version used was 4 update 4 64 bit
the snmp packages installed were:
net-snmp-5.2.1-0.2
net snmp-lib - 5.1.2-11
net-snmp-lib - 5.2.1-0.2
I'm really new to Linux and I badly needed some help.
I can't find the possible cause of this error log:
snmpd: error parsing '', skipping
RHEL version: RHEL4 ES Update 4 64-bit
version of snmp packages installed : net-snmp-5.2.1-0.2, net-snmp-libs-5.1.2-11, net-snmp-libs-5.2.1-0.2
I am running this command,
Code:
rsync -vrl --progress --stats --perms --delete --exclude '*~' --exclude 'Music' --exclude 'server' --exclude 'Downloads' --exclude 'Ubuntu One' --exclude 'Videos' /home/dave/ /media/server/backup/desktop/dave
It transfers files that remain unchanged. The one that I notice every time is
Code:
.VirtualBox/HardDisks/anOS.vdi
I have several OSes installed in VirtualBox, so this takes a very long time.
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies View RelatedCheck 2 in your error-check show this:
error: rpmdbNextIterator: skipping h# 1022 Head V3 RSA/SHA256-signatur: BAD, key-id 3dbdc284
Is there a serious error or is just the whole multi-media package missing. I have installed 11.2 from live CD.
While doing 'yum update' an error message was issued during clean up phase:
Code:
Cleanup : elfutils-libelf-0.141-1.fc11.i586 110/180
ERROR: Module uprobes does not exist in /proc/modules
Cleanup : systemtap-0.9.9-2.fc11.i586 111/180
Does this represent some kind of problem or can I just ignore it?
I installed Fedora 12 at school on my external hard drive, using Windows Virtual PC 2007 to run Fedora at school on a dell PC with XP 2000, which works at school!However at home, i am using Windows 2007 os, I install Windows Virtual PC 2007, wasn't successful in running Fedora 12.As soon as Fedora begin to boot, an error message appeared which said,"An unrecoverable processor error has been encountered.The virtual machine will reset now".below the message it gives you only option to reset the virtual machine, however this is a vicious cycle
View 1 Replies View RelatedI recently encountered an error with pppd on both openSUSE 11.2 and 11.3. I use umtsmon (which uses pppd) to connect to the internet with my 3G device. Yesterday for some reason it just plainly refused to connect to the internet. I have been using the same configuration for almost a year now without any issues. I tried it on 4 different computers running 11.2 and 11.3 and all of them failed. Thinking that it is the hardware I borrowed a windows laptop and tested it on that, only to find that it works flawlessly. On my network server I sometimes use the device as a backup and activate it with "ifup modem0", for some reason this also now fails.
After doing some troubleshooting I managed to extract the following from pppd.
Running it with my user account:
pppd options in effect:
I have no idea why pppd would break all of a sudden but I expect it might have been an update that broke it since I have automated updates on all of my systems.
I recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:
Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.
I have rsync error message for this command,
Quote:
rsync -avr --delete --exclude lampp/tmp/* /opt/* /backup/opt/
rsync -avr --delete --exclude data/session/* /var/www/html/dmcatholic/* /backup/dmcatholic/
The error message is here.
[code]....
sent 1917154 bytes received 384128 bytes 5731.71 bytes/sec total size is 12220966785 speedup is 5310.50 rsync error: some files could not be transferred (code 23) at main.c(892) [sender=2.6.8]
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.