I am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
I want to compile Firewalk in cygwin, But error compiling libnet occur:
Firewalk-0.99.1 #./configure
loading cache ./config.cache
checking host system type... i386-pc-cygwin32
checking target system type... i386-pc-cygwin32
checking build system type... i386-pc-cygwin32
checking for gcc... gcc .....
checking for PacketSetMode in -lpacket... no
configure :erroracket lib not found
What is "Packet Lib"? I have compile Plib Package, but the this error occurs again!
I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code:
Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
I have been playing with Ettercap on my home network, learning about packet forwarding and all such things. Recently, after doing some certificate stuff, Ettercap is performing the SSL attack where it sucks out the password of a user after it issues a fake certificate. How do I turn off the SSL attack in ettercap when I'm not interested in SSL information?
View 1 Replies View RelatedI am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View Relatedi need to install nagios-plugins 64 bit, when i tried to install via yum i got this error yum install nagios-plugins.x86_64 yum error Unsatisfied dependency i hv installed openssl 32 bit but it needs openssl 64 bit, even php and perl. i tried to to install via yum yum install openssl.x84_64 but its not getting installed i tried to uninstall openssl but its shows so many packages to remove
View 4 Replies View RelatedI successfully install vnc server and client in my machine after installation in GUI mode i clicked on service and enable vnc server when i click on start. It says that "This service is being refreshed right now" Then after i use terminal and typed "#service vncserver start"
its display error message "Starting VNC server: no displays configured [FAILED]"
How to configure RAID 1 (hardware RAID 1 or Software RAID1 ) after installation of operating system : RED HAT ENTERPRISE LINUX 5.3 SERVER
View 9 Replies View RelatedI just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
now i have installed libqt3-mt-dev this error is solve but new error is comming this is followingly i didn't understand------------->checking for KDE... configure: error:in the prefix, you've chosen, are no KDE headers installed. This will fail.So, check this please and use another prefix!
View 8 Replies View RelatedI have mandriva 2007 install on my desktop. I tried to update to grub2. When I run the ./configure I got the following error message.
This script, last modified 2009-06-10, has failed to recognize the operating system you are using. It is advised that you download the most up to date version of the config scripts from [url]and [url]
If the version you run (./config.guess) is already up to date, please send the following data and any information you think might be pertinent to <config-patches@gnu.org> in order to provide the needed information to handle your system.
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI'm trying to install Wireshark but I have this message :
"configure: error: Header file pcap.h not found; if you installed libpcap from source, did you also do "make install-incl", and if you installed a binary package of libpcap, is there also a developer's package of libpcap and did you also install that package?"
I tried to use #yum -y install wireshark but didn't work.
i am trying to configure below commands and it through error some one can advise where to check and how to fix this issue
[root@2rem .vnc]# vncserver :1 -name 2rem -depth 16 -geomatry 800x600
You will require a password to access your desktops.
Password:
Verify:
xauth: creating new authority file /root/.Xauthority
Unable to start Xvnc, exiting
checking whether time.h and sys/time.h may both be included... yes
checking for long double... yes
checking for hrtime_t... no
checking size of int... 0
checking size of unsigned int... 0
[code]....
We are in the process of testing SLES 10 SP1 installation, onto a new system.
Initially the installation got failed at the start giving following error :
"Could not find the SUSE Linux Enterprise Server 10 Installation CD. Activating Manual setup program."
What is interesting to notice is , if we use SLES 10 SP2 to boot the system upto the Installation menu and then replace the CD with SLES 10 SP1 media, the installation proceeds as normal without any error.
Not sure that could be the problematic thing over here. Does it mean with SP1 , no cdrom/cd or hard disk gets detected ?
I have an Acer Aspire One, Model PAV70 that had Windows 7 Starter on it. I booted Ubuntu 10.10 from a USB HDD and then formatted the Acer drive with Ubuntu. I then started installing Ubuntu on the newly formatted HDD and got an error near the end of the install. It said, "apt configuration problem, an attempt to configure apt to install additional packages from the cd failed." After this happened the system locked up and I had to reboot. Now I get a black screen with a white blinking cursor. I can't get the system to recognize anything. What can I do?
CPU Type: Intel(R) Atom(TM) CPU N450
CPU Speed: 1.66GHz
System BIOS Version: V3.05(DDR2)
VGA BIOS Version: Intel V2001
I'm new with linux. Trying my hand at socket programming. How to instaal libnet libraries using yum.
View 3 Replies View RelatedI am trying to install libnet on fedora but I cannot find any information on installation in the package. I would be happy to receive any information or instructions for installing libnet on fedora.
View 2 Replies View RelatedHow can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View Relatedthis is my first post i have this error in ./configure for bind 9.7.3: checking for OpenSSL library... using OpenSSL from /usr/lib and /usr/includechecking whether linking with OpenSSL works... yeschecking whether linking with OpenSSL requires -ldl... unknown configure: error: OpenSSL has unsupported dynamic loading
View 1 Replies View RelatedI tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View Relatedmysql -u root -p but unable to create any database.
if i tried to configure it's giving error ERROR 1006 (HYOOO) : can't create database 'test' (error: 2)
my location for database is /var/lib/mysql and permissions are
drwxrwxrwx mysql root.....
I am configuring my Apache Server to enable checking CA Revocation List, and my Configuration lists as following :
Code:
SSLCARevocationFile /etc/httpd/confi.d/ssl.crt/CRL1.crl
But the server can not start, and the log says:
Code:
Unable to configure X.509 Storage for certificate
If I try this command to view content of my CRL file :
Code:
openssl crl -text -in CRL1.crl -noout
the console shows :
Code:
error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib:647:Expecting: X509 CRL
I think there is something wrong with my CRL file, such as the file format.Is there any requirement to the CRL file? What can I do to enable this CRL file checking?
I'm trying install TACACS+ server version 4.0.4.19 from sources. (OS OpenSUSE 11.2) On the ./configure stage i've got the following error message configure: error: Could not find libwrap. You must first install tcp_wrappers. But libwrap library has installed already. I see this by the output of ls command within /lib directory
# ls /lib | grep wrap
libwrap.so.0
libwrap.so.0.7.6
So i suggested option --with-libwrap=/lib could solve the problem. But it is not. Also i was tried make #export LD_LIBRARY_PATH=/lib with no result. The problem is still there.
Can you Please tall me What are the configuration file for DNS
View 5 Replies View RelatedConfigure Yum (Yellow dog Manager)on RedHat Linux Enterprise .
View 1 Replies View RelatedOkay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
