General :: Error - Gzip :stdin:input /output Error /bin /gstar :unexpected EOF In Archive

Mar 28, 2011

when iam opening my dec_backup folder the folling error is appering :

the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now

View 1 Replies


ADVERTISEMENT

Debian :: Gzip - Stdin - Invalid Compressed Data - Crc Error

Jun 18, 2011

I have two Debian machines running Squeeze x86 and x86_64.

I am having difficulties to untar a file in x86_64, although it is working in x86.

I made sure file is the same and the md5 match in both machines.

It seems like something special in x86_64 is causing it to fail.

See below:

View 9 Replies View Related

OpenSUSE :: Recover Data Form Old 5.25 Floppies - ERROR: Cannot Read `/dev/fd0' (Input/output Error)

Mar 15, 2010

I don't know the format of these old floppie disks, ive tried

Code:

PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)

how i can go about reading this data?

View 9 Replies View Related

General :: Cp: Reading `filename': Input/output Error?

Feb 18, 2010

I wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.

View 2 Replies View Related

General :: Deleting Files On USB - Input / Output Error

May 4, 2009

[root@localhost media]# ls UMESH
[root@localhost media]# cd UMESH/
[root@localhost UMESH]# ll
ls: cannot access ejb: Input/output error
total 0 d? ejb
[root@localhost UMESH]# rm -rf ejb
rm: cannot remove 'ejb': Input/output error
[root@localhost UMESH]# ll
ls: cannot access ejb: Input/output error
total 0 d? ejb
[root@localhost UMESH]#

The privileges for root for UMESH are as below:
[root@localhost media]# ll
total 4
drwxr-xr-x 3 vickey root 4096 1970-01-01 05:30 UMESH
[root@localhost media]#

Also I can't even paste a file in the USB.

View 7 Replies View Related

General :: Cannot Remove `<directory>': Input/output Error?

Sep 14, 2010

I have a WD external disk, NTFS file system. I mounted it on my Red Hat. While on the external disk, I deleted a directory, which was sent to .Trash-root of that disk.I went to .Trash-root and did rm -rf to completely delete that directory, but I got the following error: cannot remove `<directory>': Input/output errorWhen I do ls -la on that directory that I wish to remove, it shows me it has 0 files inside. But not only I can't remove it, I can't do anything else with it (copy, etc). And I have all the rights on that directory, so this isn't the problem.

View 6 Replies View Related

General :: Recovery Disc States Cannot Read Input/output Error?

Nov 15, 2010

Pavillion laptop crashed and I can not find all of my recovery discs. The computer will not allow me to do an internal recovery so I ordered a recovery download on line and burned to a disc. when I put the disc in the graphics came up and in started in Live-mode but then the error mess came: error while loading shared libraries: /usr/lib/libpci.so.3: cannot read file data: input/output error. The site said it was an ISO file but then it had a program it had me run to change it and burn the disc.

View 1 Replies View Related

Ubuntu Installation :: ERROR - Erase Disk And Install Ubuntu Input / Output Error During Read On /dev/sda

Jul 16, 2010

I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu

Screenshot-1.jpg
Screenshot-2.jpg

NOTE: The installation has started, but only to shortly be stopped by my error message.

Screenshot-3.jpg

This is my ERROR!!! message

Screenshot-4.jpg

No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.

View 1 Replies View Related

Server :: NFS Large File Copies Fail - Error Writing To File: Input/output Error?

Jun 27, 2009

I recently upgraded my file/media server to Fedora 11. After doing so, I can no longer copy large files to the server. The files begin to transfer, but typically after about 1gb of the file has transferred, the transfer stalls and ultimately fails with the message:

"Error writing to file: Input/output error"

I've run out of ideas as to what could cause this problem. I have tried the following:

1. Different NFS versions: NFS3 and NFS4
2. Tried copying the files to different physical drives on the server.
3. Tried copying the files from different physical drives on the client.
4. Tried different rsize and wsize block sizes when mounting the NFS share
5. Tried copying the files via a different protocol. SSH in this case. The file transfers are always successful when I use SSH.

Regardless of what I do, the result is the same. The file transfers always fail after approximately 1gb.

Some other notes.

1. Both the client and the server are running Fedora 11 kernel 2.6.29.5-191.fc11.x86_64

I am out of ideas. Has anyone else experienced something similar?

View 13 Replies View Related

General :: Bash Error - Syntax Error Near Unexpected Token `{

Mar 4, 2010

I am new to shell scripting, bash specifically.

I am trying to run the following script:

Code:

When trying to execute I always get this error:

Code:

In case you need to know the permissions. Here is it:

Code:

I run the script using the following command:

Code:

View 1 Replies View Related

Ubuntu :: 5 - Input - Output Error

Nov 19, 2010

Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->

View 1 Replies View Related

Ubuntu :: SSD -- /dev/sda: Input/output Error?

Jun 25, 2011

Quote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?

Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem

View 5 Replies View Related

Fedora :: Input / Output Error On NTFS HDD

Mar 25, 2011

My dad is out of town for a while, so I've been using his computer to rip my DVDs with Handbrake. He has Windows Vista installed, so I did a full installation of Fedora 13 on a thumb drive and just run everything off of that. However, when I went to delete some of the encoded videos after I had moved them to my computer, I got a system error that said 'can't delete files: I/O error.' Now, if I try to boot up Windows, his computer is stuck on a black screen checking a bunch of dlls. He'll be back in a couple of weeks, so I'd like to have it fixed by then.

View 2 Replies View Related

Ubuntu :: Cannot Access [dir]: Input/output Error?

Jun 9, 2010

I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error

View 3 Replies View Related

Software :: Can't Copy DVD With Dd - Input/output Error

Jul 13, 2010

Can't copy DVD with dd - Input/output error

Code:
kevin@orangebox:~$ dd if=/dev/dvd of=~/Videos/backup.iso bs=2048 count=4169919
dd: reading `/dev/dvd': Input/output error
191160+0 records in
191160+0 records out
391495680 bytes (391 MB) copied, 154.38 s, 2.5 MB/s

View 4 Replies View Related

CentOS 5 :: EBS Volume - Input / Output Error

Feb 24, 2011

We are running an C++ application in AWS EC2 instance (CentOS 5.4) mounted with an EBS Volume (say /mymountpoint). We do more simultaneous writes to the EBS Volume from our application. But at some point we get 'ERROR: Input/output error'. After this, 'ls -l /mymountpoint' command itself fails with the i/o error. The filesystem which we use for the EBS Volume is xfs. I unmounted the drive and done xfs_check and again mounted the drive. Now, everything seems to be working fine. But the issue still persists everytime when we do simultaneous writes.

I believe the following details will be useful,
[root@domU-12-31-39-07-81-36 StoreGrid]# cat /etc/redhat-release
CentOS release 5.4 (Final) .....

Output of dmesg :
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "sdh": Disabling barriers, not supported by the underlying device
XFS mounting filesystem sdh
Ending clean XFS mount for filesystem: sdh .....
Starting XFS recovery on filesystem: sdh (logdev: internal)
Ending XFS recovery on filesystem: sdh (logdev: internal)
The XFS utilities are in v2.9.4

View 2 Replies View Related

Fedora :: Input/output Error When Trying To Copy DVD Contents With DD

Mar 3, 2010

I even threw some video DVDs at it to make sure it wasn't the disc.

Code:

[pickens@acer1 Videos]$ dd if=/dev/sr0 of=POTC.iso
dd: reading `/dev/sr0': Input/output error
5088+0 records in

[code]....

I am getting the same thing on my laptop running Mandriva, oddly enough. Two different drives, two different computers, two different distros and multiple DVDs.

View 9 Replies View Related

Fedora :: Cannot Remove `file': Input/output Error

Jan 21, 2011

When running rsnapshot tonight it failed with a bunch of

cannot remove `file': Input/output error

errors.

I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?

View 9 Replies View Related

Fedora Hardware :: Tape Input - Output Error ?

May 3, 2011

I'm either missing the obvious or have four identically defective tape drives. Each is a Seagate or IBM Travan drive (yes, I know they're old and I need to access the data; they were in Win boxes) using QIC-80/DC-2120 media. I've been trying to solve this using three Fedora boxes (different versions) and one Debian machine.

The OS's recognize the drives and they show up as /dev/st0.

With no media in the drives, I get a status report; with media inserted, I get the same input/output errors.

Examples (all as root):

With tape inserted:

With no tape in drive:

With tape inserted

Everything I've found on Google suggests that the drives are defective.

View 4 Replies View Related

Ubuntu Multimedia :: Input - Output Error With Growisofs

Mar 10, 2010

I use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.

For some reason every time i try to burn a disc it gives me this error message:

Code:

I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.

View 1 Replies View Related

Ubuntu :: Cannot Access /etc/mtab: Input/output Error

Mar 20, 2010

Code:

ubuntu@ubuntu:~$ ls -al /etc | grep resol
ls: cannot access /etc/mtab: Input/output error
ls: cannot access /etc/resolv.conf: Input/output error

[code]....

Quote:

Code:

ls: cannot access /etc/mtab: Input/output error

I don't like the look of this at all!

View 6 Replies View Related

Ubuntu :: Errno 5 Input/output Error When Trying To Install 10.04?

May 2, 2010

The title is pretty self explanatory, I was just wondering how to overcome this error, if I can...

View 9 Replies View Related

Ubuntu Installation :: Input / Output Error During Write On /dev/sda

May 23, 2010

I'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:

Input/output error during write on /dev/sda.

It won't let me retry or ignore and when I cancel the installation continues until I get another error.

View 2 Replies View Related

Ubuntu :: Input/output External Hardrive Error

Jul 23, 2010

I installed Ubuntu 10.04 two days ago and was using my 1tb passport external HDD with it to download and store files. However today whenever i try and copy/cut and past to the HDD i get this error message..

Error opening file '/media/My Passport/test.avi': Input/output error This is obviously very fustrating and i want to stay with Linux but i do need to fix this problem else im afraid im going to have to back to awful windows.

View 4 Replies View Related

Ubuntu :: 10.04 Install Encountered Input / Output Error

Aug 19, 2010

I'm having some trouble installing Ubuntu 10.04. What I am trying to do is completely wipe all things on my computer and install Ubuntu. I have followed the instructions from Ubuntu's homepage on how to download the ISO, and ran their program to put it onto a portable USB device. Through doing all of this, I receive no error messages. Then it tells me to change the BIOS to boot from USB, so I did that. I've successfully accessed the install menu and filled in all the information requested (i.e. computer name, account name, etc.). I select that I want to delete the current partitions and use only Ubuntu. It starts to install, but at 67%, while copying files, I receive an error.

This error is:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.

View 9 Replies View Related

Ubuntu Installation :: Input - Output Error When Booting From CD

Oct 2, 2010

I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.

For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.

When booting up my computer I get this message:

I have no idea what this means. I've tried to find answers on this forum with no luck.

The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8

View 3 Replies View Related

Ubuntu :: Data Could Not Be Written (Input/output Error)

Oct 18, 2010

i tried to rip a dvd last night and it got 98% done then said "Data could not be written (Input/output error)"here is the error log from brasero

Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroDvdcss called brasero_job_get_action
BraseroDvdcss called brasero_job_get_action

[code]....

View 2 Replies View Related

Ubuntu :: Cannot Open File: Input/output Error

Nov 11, 2010

I just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:

Code:

Cannot open file: input/output error

Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using

Code:

cp -r

and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.

View 2 Replies View Related

Ubuntu Installation :: Errno 5 - Input Output Error

May 1, 2011

Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3

Ubuntu 10.10
Maverick Meerkat
Desktop Edition

Tried changing BIOS setting...

SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked

View 1 Replies View Related

Software :: MPD Alsa Mixer: Input/output Error

May 16, 2011

I'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:

Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.

[Code]...

I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved