I am running Fedora 15 and want to add a network printer (Brother HL 2040) on a Win pc reunning XP pro. Fedora finds the network printer, shows that is shares, but when I try to finish I get the above message. I have emptied the spool file of the test page I tried earlier and nothing but the tmp file remains. Anyone have any suggestions?
View 1 RepliesI've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
View 9 Replies View RelatedI am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
View 2 Replies View RelatedI hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
View 1 Replies View RelatedI'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies View RelatedWhen I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies View RelatedI have a problem with getting my fedora 14 laptop to connect to my fedora 12 server that is hosting my smb HP Deskjet 5650 printer. The error that I get is the following: CUPS server error. There was an error during the CUPS operation: 'client-error-not-possible'.
I have been able to get my daughters Ubuntu laptop and my wife's Windows XP laptop to connect and print without a problem.
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
GNU Emacs 23.1.1 I've noticed that if I run Emacs and M-x server-start, I can use the emacsclient program as usual, but if if I start Emacs using emacs --daemon and then try to use emacsclient the new frame locks up and the shell outputs *ERROR*: Arithmetic error. This issue doesn't happen if I use the -t flag to force terminal mode when running emacsclient.
View 2 Replies View Relatedcups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
Since there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
when I reviewed the error_log I found that it is logging thousands of errors which are similar. I've included a sample of the errors. The following error seems to happen constantly, from many different ip's...
Code:
[Thu Apr 22 01:02:06 2010] [error] [client (the ip address removed)]
File does not exist: /home/virtual/site4/fst/var/www/html/colombia-news,
I'm currently trying to install TSM backup client 5.5.2 and getting dependency errors when i do the following rpm -i TIVsm-API.i386.rpm
[Code]...
linux version : Linux version 2.4.9-e.27smp (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-118.7.2))
I noticed that on my server, I keep getting the same error flooding my logs:
Code:
We don't use CUPS but I'm sure that package is a dependency of something else. It seems like this is Samba trying to share out to the local CUPS server. How can I disable this from flooding my logs? Samba should not be sharing out any printers at all.
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
I'm new to ubuntu and trying to use bit torrent, while installing there was an error message, but the program was still shown as installed. When I tried to use it i got this error "urlopen error [Errno 111]".
View 6 Replies View Relatedi have followed what in this link to share my printer to my other windows desktop, but when i try to print from there i see this error in the jobs list
from the linux pc i can print without any troubles...
also here is the error log from the cups: cups_error_log.tar.gz
I have Ubuntu LTS 10.04.2 x86-64 running with default Cups installed. Now I am trying to print on a Canon iRC1021i network printer using a x64 PPD file. Trying to print a test page delivers a "server-error-internal-error".
After this I ran the debugging mode which delivered the troubleshooting.zip file.
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies View RelatedI'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
Updated to CUPS 1.4.3 from printing repository and was getting this while page test printing:
Code:
/usr/bin/lp: Unsupported format 'application/postscript'!
Downgraded to 1.3.11 and it was solved.
openSUSE 11.2 x86_64, KDE 4.4.3
When I try to configure a printer, I get the message "CUPS SERVER ERROR"- The CUPS scheduler is not running-my printer a (LEXMARK all in one X2600)and worked fine since ubuntu 8.04..But now it doesnt work.Lexmark even provide a linux driver.
View 9 Replies View RelatedI get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
Code:
sudo aa-complain cupsd
sudo /etc/init.d/cups restart
[code]....
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
I have downloaded the file "icaclient_11.100_i386.patched.deb" from the Citrix website and installed it on my Ubuntu laptop. Everything seems to work fine. I can login to the secured website and even can click on the application.
After a while I get this error message: "You have not chosen to trust Thawte Server CA, the issuer of the server's security certificate (SSL error 61)"
I deinstalled the ICA Client (Citrix Receiver) and re-installed it again, but nothing seems to help. I keep receiving this "Thawte Server CA" error!
I have checked everything in FireFox (Thawte is there) and also tried to load the certificate, but FF tells me the certificate is already known to it.
So, why am I getting the error that I didnt choose to trust Thawte Server CA?
gcc linux client error report:
View 8 Replies View RelatedI'm having problem running open SSH. I have installed SSH, on my system, but when I run:ssh localhost.I get the error :Read from socket failed:Connection reset by peer.I get that same error when trying to connect from a different local computer.When I attempted to restart the service by typing: sudo /etc/init.d/ssh restart.I proceeded to generate a new set of keys by running, ssh-keygen -b 1024.But I get the same errors after doing so.
View 1 Replies View RelatedI am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View Related