General :: Error 'Method "curlQuery" Of Class "Twitter" Reported An Error: CURL Library Not Installed
Jan 19, 2010
I am installed cUrl from http://packages.ubuntu.com/lucid/amd64/curl/download for my ubuntu 9.0 with php 5.2 ,Apache 2.0.It was installed by gkebi package installer. but when i display phpinfo() curl not found since i was attempt to use phptwitter class. what is the proble i have? When i am trying to install again package installer shows same version of curl already found, but phptwitterclass shows following error 'Method "curlQuery" of class "Twitter" reported an error: CURL library not installed.'
View 1 Replies
ADVERTISEMENT
Jun 11, 2011
Just an FYI for anyone who may be having this particular problem. A short while back, I was trying to attach a picture to a Twitter post, and dropped my network connection. No big deal...connection came back, and things went on. Next time I launched Choqok, it popped up a message saying "Server Error: This method requires authentication". It was puzzling, and didn't appear to impact my use...until I went to send a direct message, and it would give that error and crash. After quitting Choqok, the file (/tmp/ksocket-user/klauncherXXXXXX.slave-socket file) was still present. Deleting that file manually cleared the error up. I've seen this mentioned in a couple of other forums, but none with a solution posted.
If anyone else has that error, and this method resolves it, please let us know. I'm using openSUSE 11.4, but it should apply to any version/distro of Linux using Choqok.
View 5 Replies
View Related
Jun 27, 2010
I'm running Slack 13.1 64 bit. I'd like to try running multi for 32 bit support so I can run a 32 bit version of firefox using the 32 bit flash plugin. Here's what I did: - followed Alien Bob's Wiki and download and installed all the *txz files. - installed a bunch of required libraries following the instructions on the Wiki - installed the 32 bit 10.1 version of the flash player plugin in $HOME/.mozilla/plugins/ - started the 32 bit 3.6.3 version of firefox; it seems to work fine. - go to about plugins and verify that Shockwave Flash (libflashplayer.so) is version 10.1 r53 and it is enabled. - run "ldd libflashplayer.so" and verified that all libraries are found. - run "ldd /usr/lib/firefox-3.6.3/firefox-bin" and verified all libraries are found. - go to [URL]... and click on "test your adobe flash player installation" I will get this error: Adobe Flash Player error: could not load cURL library - I verified (repeatedly) that I do have what I think is the correct package. How can I fix (or start debugging) this error?
View 7 Replies
View Related
May 6, 2011
I'm using cURL in ubuntu to download some files like
While some files may be missing from this sequence but when I just use curl -O [url]
cURL will download a 404 error page for those missing ones. How can I avoid this?
View 1 Replies
View Related
Feb 26, 2010
On a fresh install of Fedora 12: I am trying to do a software update and keep getting these errors. I am new to Fedora but have used Ubuntu for some time. An Internal system error has occurred:
Under more details it states:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
[Code]...
View 1 Replies
View Related
Jun 9, 2010
i have written file transfer program using libcurl.
#include <stdio.h>
#include <curl/curl.h>
#include <curl/types.h>
[code]....
View 1 Replies
View Related
Nov 9, 2010
I use slackware current, and curl and wget give the following errors:
Code:
repo@cannabis ~]$ wget -r http://users.telenet.be/reggersjans
--2010-11-09 13:48:14-- http://users.telenet.be/reggersjans
Resolving users.telenet.be (users.telenet.be)... ::ffff:74.117.221.11, 74.117.221.11
Connecting to users.telenet.be (users.telenet.be)|::ffff:74.117.221.11|:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
[Code]...
View 7 Replies
View Related
Jan 26, 2011
I have a strange problem with using curl function in php on slackware machines. So far I tested this on 2 PCs. I din't test it on any other distributions, so I don't know if it's only slackware problem.
Problem is that I can't use php curl in normal way. It can be tested wit simple code:
Code:
$ch = curl_init("url");
$content = curl_exec($ch);
if (curl_error($ch)) {
echo(curl_error($ch) . "<br>");
}
echo($content);
When I'm opening this php script in browser I'm getting error message:
Code:
Couldn't resolve host 'google.lv'
but I can use curl command in terminal, also it works when I run this php script in terminal like:
Code:
php ./curl_test.php
So problem is not in curl or php itself, but in apache, because this happens only when this script is running in apache.
Searching google a lot, I got to conclusion that apache can't read /etc/resolve.conf file during startup. Strange thing is that it happens only when httpd starts during system startup, but if I'm stopping httpd and starting it again manually, it works as it should until I'll reboot my PC. Restarting httpd also do not work, I need to do start -> stop.
I think that apache reads /etc/resolve.conf only when it starting up and as I have DHCP, maybe network is still not ready at the moment of httpd startup.
I didn't try to configure php as php-cgi instead of apache module, I think then it would work normally because each php script would be separate process and it would read dns information each time, so the same like starting php script in terminal with command:
Code:
php ./curl_test.php
I think there are some ways to workaround it, e.g. delay somehow start of httpd during system startup, or something like that, but I want to find reason of this problem and make it work without any workaround.
View 1 Replies
View Related
Jun 16, 2010
I tried to compile one software. After I typed "./configure", there is an error:error: GSL CBLAS library not foundI installed GSL 1.9 library --- When I was installing, it was like this:
make install
Making install in gsl
make[1]: Entering directory `myDir/gsl-1.9/gsl'
[code]....
View 5 Replies
View Related
Aug 4, 2015
I just bought an lenovo thinkpad 440 few days ago. I did all that was shared at [URL] ....
I get the following on the CLI :-
Code: Select all[ 1527.961367] [drm:intel_set_fpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[ 1527.963448] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
View 2 Replies
View Related
Oct 27, 2010
2 months ago, I built a dedicated backup server using 4 2TB SATA drives for software RAID5 (6TB total). A few days ago, smartd sent out mail saying it found an unreadable sector on one of the drives. I ran selftest using smartctl and the error persisted. So far, neither software RAID nor ext4fs running on top of the RAID volume have reported errors.
MOST OPTIMISTIC: It is normal to have a few bad sectors among billions. Software RAID takes care of alternatives. Keep using the system until RAID spits a more serious warning in the future.
MOST PESSIMISTIC: It is a really bad sign to lead a disaster. No good disk drive should have bad sectors especially when it is only 2 months old. The error is simply not detected by software RAID and ext4. Replace the drive immediately and return the bad drive to the supplier.
View 8 Replies
View Related
Jun 8, 2011
I have installed php-devel successfully prior to go with the installation (yum install php-devel). Here is what I did;
1.wget "url
2.tar xjvf ffmpeg-php-0.6.0.tbz2
3.cd ffmpeg-php-0.6.0
4.phpize
5../configure
6.make
7.make install
code....
View 7 Replies
View Related
Aug 2, 2010
I'm trying to grab "repo" using curl and put it into /usr/local/bin/ but I can't seem to figure out why I'm getting a permission error:
Code:
$ sudo curl https://android.git.kernel.org/repo > /usr/local/bin/repo
bash: /usr/local/bin/repo: Permission denied
[code]....
View 1 Replies
View Related
Feb 17, 2010
I have two suse linux server. Recently we got the license key. In one server i could able to register successfully. Another server is throwing an error.i am using yast-software- Novel customer center configuration. After selecting configure now, i am getting error has follows Execute curl command failed with 7 curl: (7) could't connect to host.
View 3 Replies
View Related
Feb 24, 2010
There is a centralized FTP server which are accessed by clients to develop some web development project and to achieve this the clients are using ftp service. The problem is when they are trying to copy any files and directories they are getting the following error: "Message reported from the file system: FTP copy not supported,use move instead"
I've checked all the permissions and they are all OK. I don't know why this is happening. they can create and move files and folders but can't copy files and folders.
View 8 Replies
View Related
Oct 27, 2010
I got some error in make
Code:
bash-4.1# ./configure
checking for a BSD-compatible install... /bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[code]....
View 14 Replies
View Related
Sep 16, 2010
I am trying to run i386 in gcc_test-suite using dejagnu runtest and it fails with error given below. I can see that gcc-dg.exp is in folder gcc-4.6-20100911/gcc/testsuite/lib, but runtest is not searching in this folder.
how to resolve this issue and run only i386 tests.
$ cd /gcc-4.6-20100911/gcc/testsuite/gcc.target
$ runtest -a -tool i386 -verbose
....
....
Looking for library file /usr/local/share/dejagnu/lib/gcc-dg.exp
[Code].....
View 6 Replies
View Related
Jan 6, 2011
I'm using Fedora9. I cannot start wireshark or tcpdump because of the lib dependency error:
Code:
[root@localhost ~]# wireshark
wireshark: error while loading shared libraries: libpcap.so.0.9: cannot open shared object file: No such file or directory
I updated libpcap before and the latest version is libpcap.so.1.1. I changed the version because of another application but I cannot remember when I did it, perhaps on Sep.11?
Code:
[root@localhost lib]# ll |grep libpcap
-rw-r--r-- 1 root root 309670 2010-09-11 08:10 libpcap.a
lrwxrwxrwx 1 root root 12 2010-09-11 08:10 libpcap.so -> libpcap.so.1
lrwxrwxrwx 1 root root 14 2010-09-11 08:10 libpcap.so.1 -> libpcap.so.1.1
-rwxr-xr-x 1 root root 243207 2010-09-11 08:10 libpcap.so.1.1
So I tried
Code:
ln -s libpcap.so.1.1 libpcap.so.0.9
but it doesn't work.
View 5 Replies
View Related
Jan 6, 2011
I have a .swf file that I was going to play, but when I try to open it, totem (which apparently is my .swf program) says "GStreamer encountered a general supporting library error." Now since I know a little bit about linux, I opened up a terminal and redirected the stderr and stdout to a file called "error". Then I read the file and it said:
** Message: Error: GStreamer encountered a general supporting library error.
gstffmpegdemux.c(1243): gst_ffmpegdemux_open (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/ffdemux_swf:ffdemux_swf0:
Input/output error
So then I interpreted that as meaning that there was a library called "gstffmpegdemux.c" that needed replacing. So I tried using synaptic to replace. Then Synaptic wouldn't let me get the package, Though I could see it existed (I would put up a screenshot, but for some reason it won't let me upload) then I tried aptitude, which claims it doesn't exist, and then apt-get which also claims that it doesn't exist.
View 4 Replies
View Related
Jan 29, 2011
I am trying to connect to the web interface found at [URL] using curl. This first requires login information to be entered at [URL], but I am having an issue with the login process. I am trying to submit the following form via POST:
Code:
<form action="j_security_check" method="post" id="login_form" name="login_form">
<center> <table style="background: #cac1cf;FONT-SIZE: 12px;">
<tr> <td align="center" colspan="2">Please enter your username and password:</td>
</tr> <tr> <td align="right">Username</td>
<td> <input name="j_username" style="width: 250px" id="j_username" type="text"/> </td>
</tr> <tr>
<td align="right">Password</td>
<td> <input style="width: 250px" name="j_password" id="j_password" type="password"/> </td>
</tr> <tr> <td colspan="2" align="center">
<input value="Enter" name="enter" type="submit"/>
<input value="Clear" name="Clear" type="reset"/>
</td> </tr> </table> </center> </form>
The command that I am using for this is the following:
Code:
curl -c cookies -b cookies -L -d "j_username=user%40domain.com&j_password=pass" [URL]
The command is properly formatted as far as I can tell. I tested it with another website using a similar authentication scheme using different POST variables specific to the form and it worked fine.
When I run the above command with the -v tag, it reveals this:
Code:
* Connected to lcl.uniroma1.it (151.100.4.74) port 80 (#0)
> POST /sso/j_security_check HTTP/1.1
> User-Agent: curl/7.21.0 (i686-pc-linux-gnu) libcurl/7.21.0 OpenSSL/0.9.8o zlib/1.2.3.4 libidn/1.18
> Host: lcl.uniroma1.it
> Accept: */*
> Content-Length: 44
> Content-Type: application/x-www-form-urlencoded
>
} [data not shown]
< HTTP/1.1 408 The time allowed for the login process has been exceeded. If you wish to continue you must either click back twice and re-click the link you requested or close and re-open your browser
< Date: Sat, 29 Jan 2011 15:26:41 GMT
< Server: Apache-Coyote/1.1
< Content-Type: text/html;charset=utf-8
< Content-Length: 1554
< Connection: close
<
{ [data not shown]
103 1554 100 1554 0 52 5081 170 --:--:-- --:--:-- --:--:-- 10223*
Closing connection #0
I cannot tell why the login timeout is expired when I try to do this, and my investigation toward this end has been fruitless. I saw a brief snippet on Google that vaguely suggested that the underscores in the domain name were at fault, but replacing these with their encoded counterparts did nothing to resolve the issue (that, and underscores should be fine when sent unencoded according to the standards). I have extensively perused the man pages and have come up with nothing to adequately explain this behavior. I also talked to a friend who has worked with curl in his line of work, but he mostly has experience in the context of PHP and has not dealt with this issue before. I am running GNU/Linux 2.6.35-22-generic-pae.
View 3 Replies
View Related
Dec 3, 2010
Im new to Linux, so wanted to ask something.I need to install a Curl Library for my Platform in order to run my Game Server.But how do i install it ??Already found the files: [URL]..I have Linux Ubuntu Lucid (10.04)
View 1 Replies
View Related
Feb 4, 2011
I have a simple code like below. when I run this command javac callSMSClient.java I get this erros. Any solution to this please?
View 13 Replies
View Related
Mar 6, 2010
Trying to run Secondlife-i686-1.23.5.136262 app on Ubuntu 9.10 64 BitS I get
./secondlife/
64-bit Linux detected: Disabling GStreamer (streaming video and music) by default; edit ./secondlife/ to re-enable.
Running from /home/pbureau/Downloads/SecondLife-i686-1.23.5.136262
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgiogconf.so
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
code....
View 9 Replies
View Related
Mar 7, 2010
I have Debian Testing, Kernel 2.6.32-trunk-686 and Java version:
java version "1.6.0_16"
Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
If I open web page with Java application (in Opera, Iceweasel and Google Chrome), for example this page: [URL] I get error message (image in attachment). If I click in the Details, I get this text:
Java Plug-in 1.6.0_16
Using JRE version 1.6.0_16-b01 Java HotSpot(TM) Server VM
User home directory = /home/johnnycage
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class AppletGui not found.
java.lang.ClassNotFoundException: AppletGui .....
Exception: java.lang.ClassNotFoundException: AppletGui
View 4 Replies
View Related
Feb 24, 2011
please i try to compile the below code on ubuntu with g++ but i was getting an error message
fig03_05.cpp:10: error: new types may not be defined in a return type
fig03_05.cpp:10: note: (perhaps a semicolon is missing after the definition of �GradeBook�)
fig03_05.cpp:32: error: two or more data types in declaration of �main�
[code]...
View 7 Replies
View Related
May 5, 2011
I am getting a linker error for a simple program to represent a singleton class.
Find below the program which I have written:
View 3 Replies
View Related
Jun 24, 2010
Is there any curl API to configure only the required protocol. If I have proper openssl installed, the installed curl will have all the protocols (like HTTP, HTTPS, FTP, File etc...) supported by default. Is there any way to allow or disallow only some of the protocol at the runtime. Say I need to support only HTTPS, FILE and I dont want to allow HTTP. Is there any way to do this?
View 1 Replies
View Related
Apr 12, 2010
[code]...
How do I fix this?
View 5 Replies
View Related
Jun 14, 2010
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
View 5 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
