General :: Broken Dual Boot - Xp / Ub - Error: Error File Not Found - Grub Rescue
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message: error: file not found grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message: Error 15: File not found Booting 'not lucky' pause SGD has NOT succeeded SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition, I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2 missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code: Boot Info Script 0.55 dated February 15th, 2010 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #2 for /boot/grub .....
I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are: hd0,2 is / hd0,5 is swap entering the "set" command results in: prefix=(hd0,2)/boot/grub root=hd0,2 [Code]...
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked - i did the windows cd fixmbr trick, not worked - reinstalled debian with fixmbr the first step and nothing - tryed deleting with dd the mbr, not worked - reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
I have a pc that was running with the latest version of ubuntu and i wanted to install just vista for somereasons.
And what i did is to format the main driver and try to boot it from vista CD and as you may guess i have an error that says: unknown file system grub rescue
Each time i start the pc. I have an ubuntu live cd and also the vista cd, so what should i do now? the vista cd dosnt boot and the same screen appears all the time.
Yesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it.
After this I restarted but I can't get into either OS. I get an error that says Error: unknown filesystem grub rescue>
I think I need to fix something in grub. I have been booting off of a usb stick with linux on it in the mean time.
Yesterday I installed the latest version of ubuntu to my computer that was already running windows 7. I had everything working fine until in windows I deleted a partition that had nothing in it. After this I restarted but I can't get into either OS.
I get an error that says Error: unknown filesystem grub rescue>
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
I am using Ubuntu 10.10 dual booted with windows vista. My boot is in a separate partition (sda5). My computer told me that there was limited space on that partition so I tried to clean things up using apt-get by removing old kernels. Turns out I didn't do it correctly because I consistently get an 'ERROR 15' when I shut down and rebooted my computer. I have a live-CD USB-stick so I tried reinstalling grub, (grub-install) updating the menu.lst (update-grub), and manually going through menu.lst and changing to root=(hd0,4) and groot=/dev/sda6. But I still get this ERROR 15 when I reboot.
when I do sudo grub find /boot/grub/stage1 find /boot/stage1
Both give me an ERROR 15 message and I'm not sure how to proceed with a diagnosis. When I ran update-grub, occasionally it used to tell me that /etc/fstab may be incorrect. Here is /boot/grub (note that stage 1 does exist!) ( this is /dev/sda5)
I just installed Ubuntu on a computer but it can't boot, it ends with a greb-rescue error. What shall I do? Here's my fstab and my sudo blkid. I did an ubuntu side installation with xp.
Le FSTAB # /etc/fstab: static file system information. # Use 'blkid -o value -s UUID' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5). # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=3a307ad3-99a9-4301-8ad0-f601ef9d157c / ext4 errors=remount-ro 0 1 # swap was on /dev/sda6 during installation UUID=5b3ff501-f07c-4c2e-ac2d-a238b599cbe2 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
I have a netbook that dual-boots Win XP and Ubuntu 10.04 and accidentally hit the Win recovery mode in GRUB today, but quickly restarted without formatting or proceeding with any recovery. But upon reboot I just see: error: no such partition. grub rescue>
What I have tried so far: Boot to USB Live Disk... It won't, just goes straight to grub rescue.I do ls and it gives me (hd0) (hd0,4) (hd0,3) (hd0,2) (hd0,1) (fd0) error: fd0 cannot get C/H/S values.
set gives me prefix=(hd0,5)/boot/grub root=hd0,5
but if I try to boot it says unknown command so I figured I needed to find the right partition to boot from but I went through all of them with ls (hd0,4)/boot, ls (hd0,3)/boot etc. and every partition comes back "unknown filesystem".
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found. grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message "Error: No such device: "long number" Grub Rescue> "
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
I have dual boot with Ubuntu 9.10 and Windows 7. Today, after using Partition Wizard on Windows to resize its partition, I got the following message when reboot:
Code:
I dont actually know what to do, I've been reading some threads on the internet but nothing equal to my case, only people who installed Windows after Linux and lost GRUB. Do I just need a live CD to reinstall GRUB? Can somebody tell what to do?
I am to reinstall the notebook of my father, that had Windows XP and Ubuntu on it. And I dont know anything on Ubuntu. My objective was to make a fresh install with XP only.So I was checking the partitions within Windows and found 7 or 8 of them which I could not understand: I asked to remove them, one by one, and got some error mesage on Windows. Now I understand these were probably used by Ubuntu.Now, when I restarted the PC,n I got:"error no such partition grub rescue"..I tried to boot from the CD - a windows XP setup CD, but I get blocked as well, because when I try formatting the drive during the installation CD it makes an error, or otherwise without formatting I also get an error.I guess the partitionning information of the hard drive is inconsistent, making everything fail.I dont know what to do.I am thinking to use a USB disk to reformat the HD, but I am not sure it will help.
