Ubuntu :: Installing Windows - BSOD Error (0x0000007B) And Error With Setupdd.sys (error Code 4)
Jun 27, 2011
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies
ADVERTISEMENT
Jun 30, 2010
When i insert my XP cd before i could get to the install or repair screen i get this error I found this and i am unsure what the problem is. Does it not like my HD? XP installed on my laptop in the past but i just got it back today from warranty service and they changed the HD. It should be the same type. NOTE: I did mess up the MBR badly. Bad enough to not be able to install Win7 which has been solved since. I broke my MBR/Windows doesnt let me reformat!
View 2 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
May 9, 2011
I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
View 3 Replies
View Related
Sep 19, 2010
I'm trying to sync a folder between my Windows install and my PCLinux install. Same machine, Windows 7 on the C drive and Linux on an external USB hard drive.
Using the Grsync GUI, I searched for the source and destination folders, and then executed the command. Here is the output:
** Launching RSYNC command (simulation mode): pkexec rsync -r -n -t -v --progress -s /media/Win7/Documents and Settings/Paul/Application Data/The Word file:///root/.wine/drive_c/Program Files/The Word/myData
ssh: connect to host file port 22: No route to host
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7]
Rsync process exit status: 255
It seems to be doing an FTP operation, whereas all I need is a file transfer. Can anyone point out my error here?
View 5 Replies
View Related
Jun 14, 2011
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
View 1 Replies
View Related
Apr 13, 2010
while installing the linux-2.6.31 source code in fedora 12 I got an error:
[root@pratyush linux-2.6.31]# make install
sh /home/parag/rpmbuild/SOURCES/linux-2.6.31/arch/x86/boot/install.sh 2.6.31 arch/x86/boot/bzImage
System.map "/boot"
/sbin/new-kernel-pkg: line 277: /sbin/mkinitrd: No such file or directory
mkinitrd failed
View 2 Replies
View Related
Jun 21, 2011
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
View 3 Replies
View Related
Aug 7, 2010
I was trying to installed skype and i am getting a error that reads: Error: Wrong architecture 'i386' has any one installed skype before?
View 3 Replies
View Related
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
Aug 11, 2010
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
View 5 Replies
View Related
May 14, 2010
I know i get the error code because i dont have my windows partition. But i seriously need my vista back. I tried using VMware player but it didn't work. Is there anyway i can restore my windows partition without the installation disc? The restore disc does not work as it needs a windows partition.
View 7 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Aug 17, 2010
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
View 3 Replies
View Related
Feb 22, 2009
I have the DVD installer of Fedora 10, i want to dual boot with windows vista. well i get up to the partitioning part of installation (in anconda) and it asks me how i want to partition it... i wanted to re size my partition and create the default format, so i keyd in 70GB and Okay. then it came up with an error, saying I had bad sector(s) The error told me to run chkdsk /f /r in windows, then i could run ntfsresize with -b, (in Linux) well i did all those steps, and shrunk /dev/sda1 to 70gb (/dev/sda2 is my recovery partition) i have a 140 gb hard drive, but can't find the unallocated space anywhere!
when i booted windows, it ran a chksdk, like it should, and in my computer it said that it had been shrunk (because the pie graph showed a capacity of around 70GB) When i go into windows disk management it says no unallocated space, just one big partition (and a 8gb recovery partition) this is the same with GParted on puppy linux, GParted on fedora 10 (live cd) says there is no drives I can mount or unmount and same error on partition logic... in EASUS partition manager i get told that there is no unallocated space, in the fedora installer there is only /dev/sda1 and /dev/sda2. Does anybody know.. how to install fedora on this partition, or get rid of the partition and repartition it another way. when i click on the option to remove all linux partitions and create default format, it errors and says it cannot make another primary partition, then says there is no room for /boot. and i can not proceed.
View 1 Replies
View Related
Feb 27, 2011
First thing i want to say, i�m not very good in English, becouse im chilean, so, if i have too many gramatical errors, please let me know...
Okay, while im finishing installing Ubuntu 10.10 in Windows 7, an error pop out an says:
Ubuntu Instalador
Ocurri� un error: Error executing command
>>command=C:windowsSystem32cdedit.exe /set {f972d088-42bd-11e0-88bb-002454998f62} device partition=U:
>>retval=1
>>stderr=Error al establecer los datos del elemento.
Solicitud no compatible.
[Code]...
View 3 Replies
View Related
Jan 19, 2011
after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
View 6 Replies
View Related
Feb 6, 2010
I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
View 4 Replies
View Related
Apr 8, 2011
i tried to install some themes and after the installation, I'm having problems on my "Places" menu(from the upper left next to Applications). The thing is, when I try to(from up to my drive letters) select from the said menu, I'm always being redirected to the themes settings with an error "There was an error installing the selected file."
View 5 Replies
View Related
Oct 10, 2010
Am trying to install Turck MMCache for PHP 5.1.6 (cli) (built: Mar 31 2010 02:39:17) OS: Centos 5.5 Final while running Make command i get this error and comes out of the installation. Need team assistance.
/opt/turck-mmcache-2.4.6/mmcache.c: In function 'fixup_zval':
/opt/turck-mmcache-2.4.6/mmcache.c:705: error: 'empty_string' undeclared (first use in this function)
/opt/turck-mmcache-2.4.6/mmcache.c:705: error: (Each undeclared identifier is reported only once
/opt/turck-mmcache-2.4.6/mmcache.c:705: error: for each function it appears in.)
[code].....
View 2 Replies
View Related
Jul 10, 2010
Last month, I agreed to install Ubuntu on my sisters Toshiba NB 305. Ubuntu was fine, but somehow installing it and GRUB hosed both the XP partition and the recovery partition. The Windows splash screen would appear for a second or too, and then Windows BSOD'ed.
I managed to coax the recovery partition into resetting the netbook, and told my sister to be happy with XP for the moment because I had to study for exams.
But she still wants her Linux. So I was wondering if there was a way to ensure that the installation would be OK.
View 5 Replies
View Related
Feb 7, 2011
What just happened was that I was experiencing some serious blue screen errors in Windows all of a sudden, so I loaded up my recovery partition for windows, and ran the "Restore complete system function". At some point, it had to restart, and I got the BIOS error "Unable to detect operating system". Eventually I got openSUSE to work again by reinstalling it using my DVD. However, now, whenever I load my windows partition, I get a windows error that says it cannot configure Windows on my hardware! The furthest it gets is a blue Windows screen that says "Please wait while Windows continues to configure your hardware."
My windows version is Vista, and I use openSUSE 11.3 as my primary partition. My question is this: How can I re-install Windows onto my partition? I have a recovery partition setup still, but I'm afraid that the Restore Complete System function will mess with my linux partitions again!
All I want Windows for is to play WoW! Running WoW through Wine is fail on my laptop for some reason, its far too slow and problematic. Please help me... some Linux forums just trashed me for using Windows at all, but its my only option available for my particular spec of computer to play this game, so that type of advice doesn't help me much. Feasible alternatives to a Windows partition would be nice, but Wine clearly doesn't work for me like I desire.
View 4 Replies
View Related
Aug 23, 2010
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
View 4 Replies
View Related
Jun 30, 2010
So I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
View 9 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jul 8, 2010
I am on Ubuntu Lucid (updated till date). I am using Kernel Linux 2.6.32-24-generic Recently I am not being able to run Cheese (webcam tool). When run it is crashing. Upon starting it from prompt I noticed the following error : libv4lconvert: Error decompressing JPEG: fill_nbits error: need 2 more bits The program 'cheese' received an X Window System error. This probably reflects a bug in the program. The error was 'BadMatch (invalid parameter attributes)'.
[Code]....
I checked in Skype and there the webcam is working fine. I tried with Camorama but that always gives an error "Could not connect to /dev/video0, please check connections."
View 2 Replies
View Related
May 25, 2011
i tries to upgrade my fc14 to fc15 using preupgrade. during installation packages process i get an error "fatal error bla-bla-bla installing netsniff-ng-...". i've booted in fc14 (in emergency mode) and manually removed old netsniff-ng package and installed new package. after that i've booted in preupgrade process. it finishes successfull. but now i can't boot in fc15 - i get "kernel panic" error. i've opened grub.conf and there is no 'initrd' section and there is no initramfs for fc15 in /boot folder. i've tried to boot fc15 with initrd /initramfs-bla-bla-fc14.i686.PAE.img. fc15 booted, but i think something wrong, because network not working, and there is only "lo" in ifconfig. what can i do?
View 14 Replies
View Related
Mar 17, 2009
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
View 2 Replies
View Related
Sep 1, 2011
I installed ubuntu today by installing Wubi and after downloading i rebooted computer and selected ubuntu but i got an error saying 'Try (hd0,0): FAT16: NO WUBILDR' and there was few more but i forgot and at the end it says 'Cannot find GRLDR in all device Press CTRL+ALT+DELETE to restart'. it used to work when i had vista...
View 3 Replies
View Related
Dec 14, 2009
Make: Fujitsu-Siemens
Model: LifeBook P7120
For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'
The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.
[Code]...
View 1 Replies
View Related
