I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
I am using Ubuntu 10.10 dual booted with windows vista. My boot is in a separate partition (sda5). My computer told me that there was limited space on that partition so I tried to clean things up using apt-get by removing old kernels. Turns out I didn't do it correctly because I consistently get an 'ERROR 15' when I shut down and rebooted my computer. I have a live-CD USB-stick so I tried reinstalling grub, (grub-install) updating the menu.lst (update-grub), and manually going through menu.lst and changing to root=(hd0,4) and groot=/dev/sda6. But I still get this ERROR 15 when I reboot.
when I do
sudo grub
find /boot/grub/stage1
find /boot/stage1
Both give me an ERROR 15 message and I'm not sure how to proceed with a diagnosis. When I ran update-grub, occasionally it used to tell me that /etc/fstab may be incorrect. Here is /boot/grub (note that stage 1 does exist!) ( this is /dev/sda5)
Code:
root@ubuntu:/# ls /boot/grub/
default fat_stage1_5 jfs_stage1_5 minix_stage1_5 stage2
device.map grubenv menu.lst reiserfs_stage1_5 xfs_stage1_5
e2fs_stage1_5 installed-version menu.lst~ stage1
Here is my problem
Code:
grub> find /boot/grub/stage1
Error 15: File not found
grub> find /boot/stage1
Error 15: File not found
I guess my main question is, if stage1 can't be found, what does that mean? What should I do next?
I am trying to install rails 3.0.1 on ubuntu 10.10. I am getting this error towards the end when i execute this command sudo gem install rails --version 3.0.1.
View 1 Replies View RelatedI have had it with the frustration of trying to figure out how to successfully install grub on my own, so I am hitting the forums. What can you tell me about installing grub/grub2 (whichever is best -- I want something that works) to my single hard drive computer. Operating systems: Windows XP, xUbuntu 9.10 Hard drive: Samsung SATA 2, 1 TB Desired result: Menu that loads upon boot so that I can select which OS I would like to load without inserting media device or disk.
I thought this individual had the most straight forward and thorough tutorial (of any I have seen) on the subject but precluded at least one thing for me that I cannot afford to ignore: I don't seem to have a "stage1" that can be loaded by the grub shell. Trying to find it in /boot/grub/stage1 in the grub shell, I get... "Error 15: File not found" What I do have in that directory is 'grubenv'. When I boot up, it loads grub, but it comes up with an error message saying, "File not found". Then, all I get is the 'grub rescue' prompt: "grub rescue>".
Obviously, after spending hours on this thing, this is not the whole story. But there have been so many attempts to try fix it with one thing or another, that I cannot easily relate them all, if I could even remember each one.
I installed vbox and windowsXP as guest and fedora13 as host. As discussed in [URL] i have run: Quote: $ VBoxManage sharedfolder add "WinXP" -name "Downloads" -hostpath "/home/rudra/Downloads" --readonly but in guest, as i prompted Quote: net use x: \vboxsvrDownloads it gives error: Systemerror 53 has occured the network path was not found
View 6 Replies View RelatedAfter upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
i have problem during boot my F11 , the problem is :
Code:
checking file systems
/dev/sda7 : superblock last time ( etc... )
/dev/sda7: Unexpected inconsistency ;run fsck manually (i.e,without -a or -p option)
***an error occured during the file system check
***dropping you to shell:
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
when i want to install centos 5.5 i take this error:
An error occurred - no valid devices werefound on which to crate new file systems.
my hardware specification is:
motherboard: gigabyte p55a-ud3
ram: ddr3 crucial 4gb
cpu: corei5 750
hdd: 2X1TB wd black edition raid1
After trying to boot into ubuntu grub gave me an error 15 saying the the file could not be found.
View 3 Replies View RelatedMy problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View RelatedHave a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Find /grub/stage1
hd(1,0)
Menu.lst
[code]....
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
Been trying to solve this using Google for a while. Well, I recently did: sudo apt-get dist-upgrade. Now, whenever I boot up I get "Error #15: File not found."From what I've gathered, something is wrong with my menu.lstI've tried several things to fix this, but I can't figure it out.
Code:
#
# examples
[code]....
I just (basically) completely uninstalled my OS by accident. In synaptic package manager I selected to completely remove volume control (which had been going haywire for god knows what reason) with intent to immediately reinstall. I didn't put 2 and 2 together when it said it'd remove all related files including the kernel... hal... restricted drivers... everything got uninstalled. Network manager crashed...
I decided to try my luck with restarting (what was left) of the system. Now I'm looking at a boot screen of:
loading grub...
error 15: file not found.
Did I have to just make a boot disc and reinstall the os? or can I just "put the pieces back together" as it were and reinstall with a 'sudo aptitude update' once I get network up again?
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedI just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View RelatedI have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
An error occurred during the file system check, dropping you to a shell; the system will reboot when you leave the shell. Give root password maintenance (or type control D to continue)
View 13 Replies View RelatedI was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View RelatedI just installed Ubuntu 10.04 and everything was working fine. I also have Win XP installed and Ubuntu 9.10.I was able to boot any of these OS's with no problem.Without understanding the ramifications of my actions, I enlarged the Windows partition to incorporate the unallocated space at the beginning of my disk using Easeus Partition Master from within my Windows OS. Apparently, I wiped out my grub!I have been able to boot to my 2.6.31-14 kernel (Ubuntu 10.04) using commands from the grub rescue prompt.Upon successful boot into the system, I initiated the command: sudo update-grub and my system still reports Error: the symbol 'grub getcharwidth' not found.Here is my grub.cfg:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub[code]....
I know I must be close to resolution.
I am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:
checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
