Ubuntu Networking :: Installing EVDO Card In 9.10?
Apr 5, 2010
i have loaded ubuntu 9.10 few days back. I am having problem in configuring my BSNL EVDO CDMA2000 modem(Micromax MMX 300c). Guided by some of the threads, i have followed the below mentioned steps..
xxxxxxx@xxxxxxx:~$ sudo modprobe usbserial vendor=0x05c6 product=0x2001
[sudo] password for xxxxxxx:
Then connected the modem and gave the comment
xxxxxxx@xxxxxxx:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 05c6:2001 Qualcomm, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
then i edited the wvdial.conf(i dont understand the details provided in the threads in configuring .conf file)
xxxxxxx@xxxxxxx:~$ sudo gedit /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
[code]....
View 9 Replies
ADVERTISEMENT
Sep 6, 2010
I am planning to shift from ubuntu to fedora and i am using Data card for getting connected to internet. My data card is working fine with Ubuntu 10.04.
I have been using usbmodeswitch to make the device to be reconized as a modem rather that a storage devices in ubuntu 10.04. i have followed this link : [url] and it worked fine now when i repeated the same for fedora 13 it doesn't works.
I have installed tcl-8.5.8-1.fc13.i686.rpm , usb_modeswitch-1.1.4-1.fc13.i686 , usb_modeswitch-data-20100707-1.fc13.noarch and wvdial. in fedora 13 it never detected as a modem. i have also tryed using # modprobe usbserial vendor=0x1c9e product=0x9e00 also but this never helped.
View 1 Replies
View Related
Oct 22, 2010
I found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code:
su -
instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
[Code]...
View 2 Replies
View Related
Jan 28, 2011
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies
View Related
Feb 2, 2010
I use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 3 Replies
View Related
Feb 20, 2010
I have never connected to the internet using ZTE EVDO modem. I know it's being recognized but connection cannot be made.
View 9 Replies
View Related
May 11, 2010
I'm running Ubuntu 10.04 in South Africa and I am using a Neotel telephone device that connects with EVDO. I have followed instructions to get it working by typing: sudo modprobe usbserial vendor=0x1d09 product=0x4000.
I have also put it in /etc/init.d/rc.local to get it to load up on startup. This works and I am able to connect using the network manager. The problem is if I disconnect and then try to connect again later, it refuses to connect till I reboot and then it works, till I disconnect again.
View 9 Replies
View Related
May 11, 2010
I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:
$ sudo aptitude update
$ sudo aptitude install wvdial gnome-ppp
# lsusb
#modprobe usbserial vendor=0x19d2 product=0xfffe $ sudo nano -w /etc/wvdial.conf
I made the following changes in my wvdial.conf file,
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
[code]...
I am getting an error message as:
Wvdial configuration 1.60
/dev/modem: command not found
/dev/modem: command not found
/dev/modem: command not found
View 1 Replies
View Related
Mar 17, 2011
I recently installed the latest version of Ubuntu because I want to switch to Linux. The installation went well and now I want to connect to the Internet.However, it is necessary that I install the drivers for my wireless card, but I do not know how.I started reading the documentation, but I soon was dropped, I began.My wireless card: Texas Instruments - ACX 111.I said that I use a WEP key, I understood that was important in the documentation.I also want to say I have no wired network near my computer so I am forced to log into Wifi connection.
View 9 Replies
View Related
Jul 20, 2011
The post I saw regarding this card was back in 2007 and I followed the steps to finding WINE but can't locate it at all. Apparently I need this installed before trying to install the driver (which I already downloaded from lynsys' site).
View 2 Replies
View Related
Aug 7, 2011
I recently decided to make use of a computer that had been put away for a while by installing ubuntu on it. I went to do a full install of 11.04 (deleting all files and the other OS, windows) and everything went smooth until I realized that the wifi-card firmware had been deleted along with everything else. I can use an ethernet cable to connect to the internet, but no wi-fi. I tried googling to find the appropriate firmware, but none worked.
View 9 Replies
View Related
May 16, 2010
I have a Dell Latitude C400 laptop running Xubuntu Hardy. I am a newbie and am trying to install a PCMCIA wireless card. The card is a TRENDnet model # TEW-421PC/A. I am using XFCE.
View 4 Replies
View Related
Jun 1, 2010
I am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
View 3 Replies
View Related
May 23, 2010
I am using DELL VOSTRO 1510 laptop , it has realtek r8169 ethernet card, i installed RHEL 5 in my laptop , i checked for the driver cd provided by DELL, they given one source rpm and two other rpm for ethernet card, i tried to install them through "rpm -ivh (path)/realtek-r8169 (full name).rpm " but it asking about dependency . i tried it by using yum also but still its not working.
also i tried to create binary rpm through source rpm, but it only generating spec not binary rpm, when i am using " rpmbuilt -ba (spec file) " its showing command not found error. RHEL5 have ethernet driver for realtek-8129 in their list but not for realtek-8169, i checked it in system-config-network window, now what to do, how do i install this rpm , i want to access net through RHEL 5.
View 1 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Sep 10, 2010
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies
View Related
Jul 21, 2010
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
View 2 Replies
View Related
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
Jul 24, 2010
I have ZTE's 8700 800M EV-DO modem provided by BSNL. It worked like charm on my uBuntu 10.04 LTS. I simply used it through 'mobile broadband' connection in uBuntu. However, few days ago, I had connection problems and technicians from BSNL resolved it. The connection works just fine in Windows 7, but now it does not work in uBuntu.
Now the dialer simply tries to connect and gives up after some time. I've even tried downloading the ZTE's dialer from the official site, but it does not work (connects, but does not work; shows 0kbps all the time).
What is the recommended way of fixing this? If more information is needed, let me know. I just love to surf the net through uBuntu.
View 6 Replies
View Related
Jan 11, 2010
I user installed the latest updates as per the update manager. My EDVO card will now not initialize. No /dev/ttyUSBn devcies for it.
View 1 Replies
View Related
Sep 3, 2010
how should i install the EVDO modem in rhel 5.3?
View 1 Replies
View Related
Nov 20, 2010
I am trying to access the internet via my ZTE AC2726 USB EVDO Modem in openSuSE Linux 11.3.
I have looked at the site How to configure ZTE AC2726 USB EVDO Modem on openSuSE Linux | bayuirawan.com but when I type the command:
As below,the following errors appear:
View 2 Replies
View Related
Jan 21, 2011
I have recently downloaded live cd of Puppy Linux and boot successfully from it. But, I could not connect my BSNL EV-DO datacard as no wireless network connection is detected by Puppy. What should I do? How can I configure my BSNL EVDO Datacard over Pupply Linux? Plz.
View 1 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Jun 15, 2010
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Aug 17, 2010
This would be the one thing that has always held me back from using Ubuntu as my main OS on my desktop. Now with Lucid Lynx in the picture I would really like to try again and get some answers this time around.
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC.
On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Also on a side note, I have a small problem with CCC. When I installed catalyst and drivers I configured my screen resolution and multi-display desktop, but every time I reboot my resolution for both screens is set to 1280x1024 and they are cloned. Why don't my settings save?
View 9 Replies
View Related
May 2, 2010
I purchased a new Sata Card today so I can install multiple harddrives on my system, but It appears as though I am missing the drivers for the card, because it is simply not recognizing it. how to obtain drivers for these cards and install them?
Edit - Just in case you were wondering, the Sata Card is Generic, and I have no idea who the manufacturer is. It literally says 'Sata Card' on the box and has no company information, but I did buy it at a reputable business, so I have no doubt that it should work fine. It is most likely this card: Newegg.com - SYBA SD-SATA-4P PCI SATA Controller Card
View 9 Replies
View Related
May 13, 2010
I'm about to install a 'new' ATI Radeon video card into a Ubuntu 10.04 computer of mine (an ASUS A7VT) that has VIA onboard graphics. My question is, how will Ubuntu deal with this? Will it automatically download the required drivers or would I be better off with a fresh install after I've put the card in?
View 8 Replies
View Related
May 17, 2010
I believe my old pIII Dell's network card running Ubuntu server 8.04 is busted. I need to replace it.
how to go about this. Do I just install the card and does it auto-install drivers or is there something else to do?
View 6 Replies
View Related
