Ubuntu Networking :: EVDO Modem - Refuses To Connect Till Reboot
May 11, 2010
I'm running Ubuntu 10.04 in South Africa and I am using a Neotel telephone device that connects with EVDO. I have followed instructions to get it working by typing: sudo modprobe usbserial vendor=0x1d09 product=0x4000.
I have also put it in /etc/init.d/rc.local to get it to load up on startup. This works and I am able to connect using the network manager. The problem is if I disconnect and then try to connect again later, it refuses to connect till I reboot and then it works, till I disconnect again.
View 9 Replies
ADVERTISEMENT
Feb 20, 2010
I have never connected to the internet using ZTE EVDO modem. I know it's being recognized but connection cannot be made.
View 9 Replies
View Related
Jan 28, 2011
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies
View Related
Feb 2, 2010
I use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 3 Replies
View Related
Sep 3, 2010
how should i install the EVDO modem in rhel 5.3?
View 1 Replies
View Related
Nov 20, 2010
I am trying to access the internet via my ZTE AC2726 USB EVDO Modem in openSuSE Linux 11.3.
I have looked at the site How to configure ZTE AC2726 USB EVDO Modem on openSuSE Linux | bayuirawan.com but when I type the command:
As below,the following errors appear:
View 2 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Jan 25, 2011
I recently removed Windows from a family member's laptop (Gateway NV52) and installed Ubuntu on it. I started out with Ubuntu 10.04 since it was an LTS. She's been very happy with it until a few days ago when it started acting up and refused to load almost any site she frequently visited. I decided to back up her data and do a fresh install of Ubuntu 10.10 (64bit) which is what I use. It installed fine, wireless works seamlessly as well.
However, Facebook refuses to load on any web browser (chrome, firefox, minefield, midori, etc.). It's only Facebook as well. The login page will appear but it will absolutely not login. I've tried it with several different accounts and it just flat out refuses.y other site loads fine and fast, and logs in fine, but facebook just doesn't seem to load.I really do not want to have to move her back to windows 7 as she's prone to viruses and Ubuntu is just flat out awesome at virtually everything, but for her, social networking is her primary way of connecting to friends and it's critical for her to have access to that site. It's really her make or break feature, and if Ubuntu can't do it then she doesn't want anything to do with it.
I've looked everywhere for a solution to this. I've tried changing DNS servers, disabling and re-enabling the wifi, clearing the cache and cookies, even down to resetting the router we use, all to no avail. The site loads fine on every other PC regardless of the OS, and I've run out of places to look.My experience with the Ubuntu community has been top notch so far, and I'm not shy of any terminal work that may be needed, nor am I shy of fiddling with anything.
View 9 Replies
View Related
May 30, 2011
I have linux mint 10 and a bt homwhub 2.0. The wifi dongle that I use is a BT Voyager 1055. Before a week ago I could connect to my bt homehub via linux mint and the bt voyager easily and quickly. But now, however, it seems that Linux Mint refuses to connect to the BT Homehub, the BT Voyager dongle seems to be working because it's green light is on. The Bt homehub is fine because our other windows pc's connect fine (I'm on my windows XP laptop now) but linux will not. On linux it recognises that the dongle is plugged it and picks up various WIFI connections including my BT Homehub, but when I try to connect it to the internet via The homehub, it will not, it try to connect for a minute or so and then a little message comes up saying 'wirless network disconected' any one now what to do ?
View 4 Replies
View Related
Jun 15, 2010
I was dual booting with XP and Jackalope using a Belkin N wireless USB. The install on Jackalope was simple, a plug and play type situation, plugged it in and it worked. A few days ago though, i wiped the whole computer and installed Lynx. To my dismay, even though Lynx sees the wireless, sees the available signals, lets me input my password... it fails to connect. It just spins and spins and eventually asks for my password again...
I'm still pretty new to Ubuntu, and Linux in general. I updated, and pretty sure i retrieved 3rd party drivers for the video card properly (using a cable connection), but thats pretty close to where my "expertise" ends.
View 9 Replies
View Related
Jun 14, 2011
After trying to deal with a very frustrating problem in Ubuntu 11.04, which caused my Eee Pc 1001PX to freeze any time I connect it to a wireless network. It worked Perfectly using my ZTE WCDMA Mobile broadband modem though. I gave up - and Formatted my netbook, Downgrading it to Ubuntu 10.10. Now the problem is the exact opposite:
The Wireless works perfectly, But the Modem Is causing the trouble.
Here is the problem:
Whenever I reboot the Computer, It doesn't recognize the modem. If I right click the networks button on the top, go to edit connections, and Delete the mobile broadband connection I had previously configured, then unplug the device (usb) and reconnect it, The computer recognizes it, allowing me to reconfigure the connection (make a new mobile broadband connection). As you can guess, repeating this after every reboot is rather irritating.
Some Technical Details:
My pc: Asus Eee Pc 1001PX
My Mobile Modem: Zte WCDMA Netstick.
When I tried to update my Kernel, the Wireless Problem from Ubuntu 11.04 was back, and I had to reformat.
View 1 Replies
View Related
Nov 9, 2010
I'm a Linux noob an I am really desperate for some top, top, top assistance. Been battling a while now with my iBurst USB modem driver and hope there is someone out there that can help? I have been through umpteen forums and threads and tried literally everything I read, but to no avail. I also realize there aren't many Ubuntu users that use the iBurst modem, but I am appealing to the few out there that do.
I have installed the open source ibriver-2.6.31 for my iBurst USB modem. Initially all went well with fast connection etc., connection everytime I boot, until... I started updates of 10.04 LTS, that is when I became aware, from the forums, that a re-install of the driver is required after every package update due to no "package management" in the iBdriver. what a pain in the proverbial to say the least!
Anyways.. now I am the stage where the driver is always installed, but...all of a sudden, I need to run pppoeconf and set up the driver after each boot to get connected!!!! If I can't find a solution it will force me back to Windoze7 which I dread to do! Can a script be written to pppoeconf (rp-pppoeconf.iso is loaded I think) automatically during boot perhaps?
So any top Linux hacker or "notsonoobasIam" user out there with a iBurst modem and similar pains & mis-fortunate experience please share your ideas and thoughts to correct this problem permanently for me please? (I should maybe mention that the other day I performed the "Grub2 Profile" exercise to try and speed up the boot time, this does not perhaps have something to do with the fact that I need to reconfigure in pppoeconf after every boot does it? I doubt it)
View 9 Replies
View Related
Mar 21, 2011
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies
View Related
Dec 23, 2009
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies
View Related
Jun 14, 2010
I use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
View 3 Replies
View Related
Feb 26, 2009
I have used the system recovery CD about 5 times on my computer and it wont do anything. I goes through the process but afterwards I go to reboot it and it just keeps restarting itself over and over again. It NEVER makes ot to the windows screen. What can I do to fix this problem? I don't have the money to go to Best Buy to ghave them fix it because I'm broke.
View 2 Replies
View Related
Feb 5, 2010
After a reboot (why did I do that???) one of the hard drives on my machine refuses to mount with the following message:
Code:
mount: wrong fs type, bad option, bad superblock on /dev/sdd1,
missing codepage or helper program, or other error
[code]....
View 13 Replies
View Related
Feb 14, 2010
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies
View Related
Jul 29, 2011
I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
View 2 Replies
View Related
Apr 8, 2010
My wireless modem has disappeared from the connection list at the top of the page. Strangely, a guest connection on that same modem is still visible but won't connect. I added the modem back in as a new connection and it was added to the list but it was greyed out and I still can't connect to it. The problem could, of course, be in the modem but I have no way to check that. Reset is not working. Lan connection to the modem works fine. This is the second time this has happened in the last week and I ended up reinstalling Ubuntu. This gave me back the wireless connection. I don't really want to have to do that again. Is there anything I can check in Ubuntu?
View 1 Replies
View Related
Apr 22, 2010
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
View 4 Replies
View Related
Sep 26, 2010
i wanna to connect to internet with USB DSL modem .
View 1 Replies
View Related
Apr 20, 2011
I have been working for the last week trying to connect my serial hardware external modem (courier 56K v.everything) within an Ubuntu 10.4 environment. I live in the boonies where I am presently forced to use dial up, so this has got to work, else I cannot update Ubuntu or download software. After trying various suggestions, which my very limited Linux skills fail me, I opted for the suggestion that I download gnome-ppp, install and then use it. Seeing how I cannot download it through Synaptic Package Manager (which I was advised to but can't as it is my Linux computer that I am trying to connect).
I downloaded the zipped file (gnome-ppp_0.3.23_Oubuntu2.tar.gz ) to a USB stick, copied it to the home directory and then extracted it, wherein a new directory was created with many files in it. From here I have been unable to install it through the command line (not sure how), nor have I been able, as was suggested, to install it via the Synaptic Package Manager (can't get it to see the file, not sure how to). I need explicit (Newbie) instructions on how either to connect the modem without gnome-ppp, or instructions on how to get gnome-ppp installed.
View 6 Replies
View Related
May 21, 2011
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
View 2 Replies
View Related
May 26, 2011
i have a samsung laptop.i recently installed ubuntu 11.04 on it.
I have a huawei WA1003A modem .In windows i connect to my modem wirelessly using (WLAN) facility after connecting it shows it has limited connectivity with the modem and then i connect to BSNL using username and password..then i get connected to internet..
In ubuntu I conncted to internet using the cable by making a new dsl connection i provided my user name and password. and then i switched on the modem connected the cable and connected to dsl connection and internet was connected.. . i want to connect it wirelessly.
View 2 Replies
View Related
Jul 25, 2010
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies
View Related
Feb 4, 2010
how to connect a Aopen fm56-sw modem
View 3 Replies
View Related
May 30, 2010
My router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
View 1 Replies
View Related
Jun 5, 2010
I currently using Ubuntu 10.04 LTS
View 2 Replies
View Related
Jun 18, 2010
i have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
View 2 Replies
View Related
