Ubuntu Networking :: ZTE AC2726 1x/EVDO Modem : Connect To Internet
Feb 20, 2010I have never connected to the internet using ZTE EVDO modem. I know it's being recognized but connection cannot be made.
View 9 RepliesI have never connected to the internet using ZTE EVDO modem. I know it's being recognized but connection cannot be made.
View 9 RepliesI am trying to access the internet via my ZTE AC2726 USB EVDO Modem in openSuSE Linux 11.3.
I have looked at the site How to configure ZTE AC2726 USB EVDO Modem on openSuSE Linux | bayuirawan.com but when I type the command:
As below,the following errors appear:
I'm running Ubuntu 10.04 in South Africa and I am using a Neotel telephone device that connects with EVDO. I have followed instructions to get it working by typing: sudo modprobe usbserial vendor=0x1d09 product=0x4000.
I have also put it in /etc/init.d/rc.local to get it to load up on startup. This works and I am able to connect using the network manager. The problem is if I disconnect and then try to connect again later, it refuses to connect till I reboot and then it works, till I disconnect again.
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies View Relatedhow to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
View 4 Replies View Relatedi wanna to connect to internet with USB DSL modem .
View 1 Replies View RelatedI am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
View 2 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
My router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
View 1 Replies View RelatedI currently using Ubuntu 10.04 LTS
View 2 Replies View Relatedi have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
View 1 Replies View RelatedI think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
My internet is provided by a 3g modem usb. I am sharing the internet connection through my desktop into a router and then to the rest of my Ubunut machines. Currently if I want to file share I have to go into the network manager and change the eth0 settings from shared to dchp automatic and then unplug the cable from the internet port on the router to one of the network ports. Is it possible to add another network card to the main machine and use that exclusively for either internet or file sharing.
View 2 Replies View RelatedI am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
how can i connect to the internet using modem card?
Intel d915,3GHz pinless,Lucent Modem
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
I am unable to connect to internet using my cell phone(sony ericsson X1i xperia). When i connect from wired internet it connects without a problem. What settings should i change/ programmes to execute? Thank u in unticipation
View 3 Replies View RelatedI have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies View RelatedI have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies View RelatedI just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View RelatedI have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies View RelatedI have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
I have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
Here is my wvdial.conf file
Quote:
Next set of commands
Quote:
Quote:
Quote:
Quote:
Quote:
I also tried as per this post [url]
Quote:
How do I connect to internet?
Is the driver for my device missing on my system?
I use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
how should i install the EVDO modem in rhel 5.3?
View 1 Replies View RelatedI have wired internet, but I can't connect to my modem. I have cable internet (Comcast) but my computer can't detect it. I do not know what do to. Tried a whole bunch a things, but I'm a novice, (Ubuntu 10.something I tried to call but they say everything was okay and I keep telling the Comcast lady I had Ubuntu, but apparently she insisted I had Windows. I thought they were not very smart, so I gave up on them.
View 4 Replies View Related