Ubuntu Networking :: Deleted Wireless Card Firmware Upon Installing?
Aug 7, 2011
I recently decided to make use of a computer that had been put away for a while by installing ubuntu on it. I went to do a full install of 11.04 (deleting all files and the other OS, windows) and everything went smooth until I realized that the wifi-card firmware had been deleted along with everything else. I can use an ethernet cable to connect to the internet, but no wi-fi. I tried googling to find the appropriate firmware, but none worked.
View 9 Replies
ADVERTISEMENT
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
Mar 17, 2011
I recently installed the latest version of Ubuntu because I want to switch to Linux. The installation went well and now I want to connect to the Internet.However, it is necessary that I install the drivers for my wireless card, but I do not know how.I started reading the documentation, but I soon was dropped, I began.My wireless card: Texas Instruments - ACX 111.I said that I use a WEP key, I understood that was important in the documentation.I also want to say I have no wired network near my computer so I am forced to log into Wifi connection.
View 9 Replies
View Related
Jul 20, 2011
The post I saw regarding this card was back in 2007 and I followed the steps to finding WINE but can't locate it at all. Apparently I need this installed before trying to install the driver (which I already downloaded from lynsys' site).
View 2 Replies
View Related
Jul 10, 2011
During installation at, Select and install software, i had this extra option "Packages to install: rt2x00-source", and answered yes. sources.list has main and contrib sections.
lspci -k
Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G ver 4.1
Kernel driver in use: rt61pci
ifup wlan0 returns this,
SIOCSIFFLAGS: No such file or directory
[Code]...
View 5 Replies
View Related
May 16, 2010
I have a Dell Latitude C400 laptop running Xubuntu Hardy. I am a newbie and am trying to install a PCMCIA wireless card. The card is a TRENDnet model # TEW-421PC/A. I am using XFCE.
View 4 Replies
View Related
Jun 1, 2010
I am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
View 3 Replies
View Related
Mar 17, 2015
I recently installed the XFCE spin of Debian (amd64) on my Lenovo L440. I tried installing it before, but apparently the 3.2 kernel that ships with Wheezy doesn't properly support the proprietary firmware for the wireless card, blah blah. So I wound up using Windows 8.1 for a bit, and then Fedora (boo). Anyway, with the wheezy-backports kernel (3.16.7-ckt4-3~bpo70+1) everything works like a charm. Everything, that is, apart from the sound card — the entire system is completely mute. Well, apart from the system beeper. I searched the forum and found another thread, but that guy was (for some reason) just running dwm — I figured XFCE might feature a more complete sound system. But maybe the output he gave will be useful in my case as well:
Code: Select alleirik@gerhardsen:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
[code]...
I also tried running alsactl init (as root), which doesn't appear to have made any difference.
View 4 Replies
View Related
Oct 7, 2010
Im having an annoying problem here, after the reinstallation of opensuse, bluetooth works fine, i can connect my cell phone and logitech mouse normally, as soon as i install the bcm43xx from the scrtipt included in /usr/sbin/ bluetooth stops connecting to devices, it can find tem when searching but the forward button is dimmed.
when i try hcitool scan,= it successfully finds the device,
hcitool cc xxxxxxx it reports an I/O error,
View 4 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Sep 10, 2010
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies
View Related
May 14, 2010
I am using Ubuntu 10.04. The Tata Photon+ card Huwai EC1260 was working flawlessly. However, I recently did a firmware upgrade on the card that was provided by Tata Indicom for it to work on Windows 7.
After that, the card is no longer detected as a mobile modem in Ubuntu. If I try to add a new connection, all options are disabled (whereas earlier Tata Photon card would appear automatically).
The product ID has changed. What change can I make to Ubuntu to enable it to detect the card again.
View 6 Replies
View Related
Jan 18, 2011
When I click on the wireless I get a message saying that I am missing firmware. I've tried connecting via ethernet, however this doesn't work either, would it be a problem if I just found a download for firmware, downloaded on another comp and copy it to my linux computer?
View 9 Replies
View Related
Dec 5, 2010
I have a Live minimal install Gentoo CD that was made from a downloaded ISO that does not contain the drivers/firmware for my wireless networking card in my laptop. So I unpacked the ISO image and un-squashed the squashfs and added two folders that contained the firmware in the /lib/firmware directory. Then I squashed the file system back the way it was (squashfs), and re-created the ISO again. Then I burned the ISO to an image on a blank CD but when I tried to boot from the new CD, the CD was ignored and the laptop went directly to the hard drive for booting. So the live CD is no longer a bootable CD. I can't even tell if the firmware will work because the CD is not detected at POST. The BIOS is set to boot from a CD before it pages the hard drive. The original CD booted fine before I made the modifications to it. I compared the contents of the original CD to the one I modified and everything is identical. What did I do wrong.
View 3 Replies
View Related
Jun 4, 2011
after installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"
I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.
View 4 Replies
View Related
Oct 24, 2010
Problem in Natty Narwhal - 11.04 with the Broadband 43xx Wireless Card: Unable to download firmware for wireless. (Also works for 10.10 and 10.04) From the 'Additional Drivers' section: Quote:
This package contains Broadcom 802.11 Linux STA wireless driver for use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. Possible Solutions: Solution 1: System > Administration > Synaptic Package Manager > Search: firmware-b43-lpphy-installer > Click Mark > Click install > Close
Kontza found the solution (post #3), so thank him for it. This solution fixed this problem on my Dell Inspiron 1545 with a Broadcom 4312 card. (Card Tech Specs: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)) Solution 2: Another option is here. Update: The Live USB of Natty Narwhal (11.04) automatically detected that I needed the STA driver. After installing it and rebooting, the wireless worked. (No cable was needed for this.) Update 2: After installing with the alternate cd, I needed a cable and after updating, I was able to download the STA driver through the 'Additional Drivers' section.
View 9 Replies
View Related
Jul 13, 2011
I am using a hp pavilion zd7000, computer says firmware is missing for wireless controller. i also have a wirless g notebook card made by belkin which will scan for networks but wont connect to them for some unknown reason. if i can get either the wireless g card to work or the built in wireless to work thata be great. I am well experienced in windows but very new to linux and how everything works.
View 1 Replies
View Related
Jul 23, 2011
I thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
View 9 Replies
View Related
Aug 6, 2011
I had 10.04 and my wireless worked out of the box.
I just installed the latest and my wireless says "firmware missing"
The card is : 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
View 1 Replies
View Related
Aug 11, 2011
Fedora OS: 2.6.38.8-35.fc15.i686 NOtebook: Compaq Presario V3424TU Wireless connection is not enabling and it is showing "Firmware missing" I need to connect wireless to help my final year project.
View 1 Replies
View Related
Apr 22, 2011
I'm re-building a laptop my daughter left here. Replaced the hard drive and installed Ubuntu 10.10 rather than go back to M/S products.
Now that I have the installation completed, I find that I really love it. The one issue is the inability to connect to our household network.
When I check for wireless networks I see that "firmware not installed".
View 1 Replies
View Related
Jul 8, 2011
I just upgraded from Fedora 14 to 15 and am having problems getting my wireless internet to work. I never had it working in Fedora 14 as it told me "firmware was missing." I have tried many different approaches described online and non have seemed to help me. I have an HP dv6700 laptop with a Broadcom "Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)" chipset. I have installed the Broadcom-wl set from yum as well.
View 9 Replies
View Related
Sep 1, 2011
I recently used bleachbit on my desktop and it worked fine, but I was online then when I left I turned it off. When it restarted I had no wireless connectivity and it would not connect, then when I went to update, it gave me: W Failed to Fetch repeatedly as I cant copy as this is my laptop I would like to know why and how to fix it. I tried sudo apt-get update which is how I got the error and helped me realize that BB is not not be used.
View 3 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Jun 12, 2011
I have installed Ubuntu 11.04 on my laptop. For some reason Wireless Network does not work any more (there was installed 9.04 before).
lspci says:
Code:
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
System->Administration->Additional Drivers doesn't list anything.
View 9 Replies
View Related
Jun 29, 2011
I installed Ubuntu 11.04 on an Acer Travelmate 290E computer. The installation went fine and everything was up and running until I wanted to use the wireless.
1. I got the "firmware not installed message" and installed the Broadcom b43 firmware.
2. I receive a new message: " wireless is disabled by hardware switch" (My acer does have a wireless switch that is switched to on.
3. After hours of research I tried to install Acer ACPI but my laptop model is not supported. I assume Ubuntu knows my wireless is there but thinks it is turned off, and the wireless switch can't communicate to Ubuntu properly.
I have already tried rfkill and all that good stuff. Doesn't work for me, Wireless is still hard blocked.
View 3 Replies
View Related
Oct 3, 2009
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v2.0.1.0 driver from Ralink. I am running Fedora 2.6.29.4-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output.
[chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v2.0.1.0.tar.bz2
tar: Record size = 8 blocks
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/2870_rtmp_init.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/ba_action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data_2870.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_info.c .....
cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
make: *** [install] Error 2
[root@fedora 2008_1225_RT3070_Linux_STA_v2.0.1.0]#
View 14 Replies
View Related
May 16, 2010
I have had trouble in nearly every linux distrobution cept for backtrack 3(heavily modified ubuntu which has a lot of wireless drivers on it. i know A LOT of people in the past have had trouble with these cards.
View 9 Replies
View Related
Sep 29, 2010
I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
View 1 Replies
View Related
