Ubuntu :: Installing The Second Video Card?
Aug 17, 2010
This would be the one thing that has always held me back from using Ubuntu as my main OS on my desktop. Now with Lucid Lynx in the picture I would really like to try again and get some answers this time around.
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC.
On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Also on a side note, I have a small problem with CCC. When I installed catalyst and drivers I configured my screen resolution and multi-display desktop, but every time I reboot my resolution for both screens is set to 1280x1024 and they are cloned. Why don't my settings save?
View 9 Replies
ADVERTISEMENT
May 13, 2010
I'm about to install a 'new' ATI Radeon video card into a Ubuntu 10.04 computer of mine (an ASUS A7VT) that has VIA onboard graphics. My question is, how will Ubuntu deal with this? Will it automatically download the required drivers or would I be better off with a fresh install after I've put the card in?
View 8 Replies
View Related
Jan 5, 2010
I'm trying to install Ubuntu (or Xubuntu) on a PC that has integrated on board video. After that I want to disable the onboard video and use an NVIDIA GeForce 8400GS video card.
I tried it before, and got a lot of resolution problems.
This is what I did:
- First, I put the card in the PCI slot and modified the bios to use it as the default video, and booted from the ubuntu CD. The installation did not go through as I got no screen output (I guess ubuntu did not recognize my video card).
- Second, I restarted and modified the BIOS so that the onboard video was the default. This worked when I booted from the CD and installed, I got screen output and all. I completed the installation and turned off the computer.
- Third, I installed the card on the PCI slot but did not change the BIOS, booted and used the onboard video, downloaded the NVIDIA driver (190.53) from the NVIDIA website, installed it, and turned off the PC.
- Fourth, I modified the BIOS so that the NVIDIA video was the default, plugged the monitor to the NVIDIA VGA output, restarted, and got ubuntu working at a very low resolution of 640*320.
This is where I am stuck. I can't change the resolution to 1024*768 or 1366*768. I only get 640*320.
Is there any way to avoid all this and do a fresh installation of ubuntu 9.10 with the NVIDIA card already in and as default on the BIOS?
I am thinking the resolution problems started because I got video drivers mixed up with intel onboard during installation, then NVIDIA. I guess I should have removed the intel drivers first before installing NVIDIA drivers. If anyone agrees, how do I uninstall Intel video drivers?
If that is not the case, how do I configure the NVIDIA drivers to work properly?
My PC is an older IBM 8303 KKU at 2.26GHz, with 2GB RAM, 40GB HDD, and a 512MB NVIDIA GeForce 8400 GS
View 7 Replies
View Related
Nov 10, 2009
There is an obscure X11 config line (busid) necessary for using more than one video card (not sure about SLI) on fedora11, ubuntu, maybe other distros as well. obscure for me until; yesterday, I mean... I tried several methods and eventually found the solution that to my dismay was already extensively documented but is seemingly hard to find.
[URL]
View 1 Replies
View Related
Jun 17, 2010
I installed Edubuntu 9.10 on a Dell Optiplex GX260. This system has onboard INtell 846G series video. I want to install an NVIDIA video card. I popped it in the case, diabled the onboard video. I get the POST, the GRUB, no problem. But once I get past the GRUB, all I get is a blank screen. The HDD does not sound like Ubuntu is loading.
View 9 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Jul 21, 2010
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
View 2 Replies
View Related
Nov 22, 2010
I want to upgrade from my 128M video (on board) to a 512M card. Since so many problems seem to revolve around video cards, which one manufacturer would be likely no cause me little or no grief installing and running?
View 1 Replies
View Related
Jan 8, 2010
I'm pretty sure I cooked a video card (fanless deal, prone to running hot). Anyways the computer boots fine and everything seems to be working from an ssh perspective. Is there some way I can ask the machine if the video card is broken?
View 1 Replies
View Related
Apr 26, 2010
It's a geforce 9500gt 1Gb 128bits. How can i see if it's working or not? And where can I find a driver to it? I've looked in the geforce's site and i've downloaded a file with the extension .run, but this file didn't work. What should i do? Core2Quad, 4GBram, geforce 9500gt 1Gb 128bits, asus's motherboard, hd 500gb sata. Ubuntu 9.10 64bits.
View 6 Replies
View Related
Aug 7, 2010
I'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
View 2 Replies
View Related
Sep 2, 2010
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
View 3 Replies
View Related
Oct 22, 2010
Just installed 10.10 and I am very impressed.
I am not having a big problem at all but my built in video system is clearly behaving like it does not have the right driver.
Are there any video cards out there that are directly well-supported by linux? i.e. genuine linux drivers that allow the card to function at full capacity or close?
View 3 Replies
View Related
Nov 29, 2010
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies
View Related
Mar 9, 2011
I would like to connect a 42 inch plus tv to a Dell Dimension e521. I need to know how big of a card (512, 1gb+) to put in it to push the image. I want it to have a HDMI port.
View 6 Replies
View Related
Oct 21, 2010
Ubuntu 10.04 has always been unstable on my Gateway GT5422E. Running slackware 13.0,13.1 on this box has been a much stabler environment. To make a long story short, I suspect that a video card might be the solution. Current, I am using the nvidia graphics chip which is built into the motherboard and has only 128 meg of shared memory.
I'm looking here: [url] at some pci-express cards. I might like to get something other than nvidia, so I've looked closely at this one: [url]
View 3 Replies
View Related
Jan 28, 2010
I have geforce fx 5200 and i downloaded the 32 bit and 62 bit for the video card driver update and i dont know how to use them and they and they come in scripts !
View 3 Replies
View Related
Feb 6, 2010
Working on a friend's PC, which was previously running XP and got a very nasty virus infection. I convinced him to try Ubuntu, showed him the interface running on my own machine and he was hooked. Backed up all his data to network, completely erased the hard disk and install Ubuntu. Sounds easy, right?
Installed 9.10, it didn't detect the video card and xorg.conf was missing from /etc/X11. After some messing around trying to get it to work, I realised that the sudo dpkg-reconfigure -phigh xserver-xorg command wasn't working properly and didn't produce the menu shown in the screenshots. After some digging I found that this was a bug in 9.10, so to make the job easier, I wiped the drive again and started again on 9.04.
With 9.04, at least the xorg.conf file was there, but had no entries under configured video device. I tried adding "vesa", "via", "openchrome" (all on separate attempts), all to no avail. I retried the dpkg -reconfigure command above. still no menu.
Now several days into this "easy" install, I rolled back to the LTS release (8.04 - hardy) and installed that instead. Still no video card detection, and resolution is obstinately stuck at 800x600. Tried the same string of tests again, and now admitting defeat The relevant output from lspci is: 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
The output from xrandr is:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0
[Code]...
View 6 Replies
View Related
Mar 5, 2010
I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 Replies
View Related
May 26, 2010
kubuntu 10.04.
1. in the user I used for system installation, my monitor works fine
2. in the user I created later - same rights - monitor is set for 60Hz. This is the only option in System Settings/Display
3. there's only xorg.conf.failsafe in /etc/X11, which seems to what the second user is using
Where is the display/video card set up in Kubuntu 10.04? Why are different users use different settings? Can I copy from one to the other?
View 2 Replies
View Related
Jun 6, 2010
Just installed the latest ubuntu on my PC. When I was running windows I had a tool called asus smartdoctor which allowed me to vary my video card fan speed. I really need to increase this fan speed as my video card overheats. Is there a unbuntu compatable program that would allow me to change the fan speed or do I need to install Wine and run smart doctor that way?
View 4 Replies
View Related
Jul 2, 2010
I'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
View 6 Replies
View Related
Sep 1, 2010
changed my video card from a Geforce 9500GT to a Geforce 210GT and the noveau driver won't let me boot into ubuntu so i can't get ubuntu to redetect my video card. how can i fix this?
View 1 Replies
View Related
Nov 6, 2010
I'm having problems with my video card (Radeon X1600) ever since I upgraded to 10.04 (video is fine until I stress the video card (eg using 3D acceleration)). This appears to be a problem with the drivers for the video card. I've had problems in the past with video cards (many because I didn't check that the card I'm buying is "Linux friendly" or not. Now I'm doing my do diligence and asking the community what video card I should buy to replace my current one? I have the following Motherboard: [URL]
View 9 Replies
View Related
