I use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:
I have ZTE's 8700 800M EV-DO modem provided by BSNL. It worked like charm on my uBuntu 10.04 LTS. I simply used it through 'mobile broadband' connection in uBuntu. However, few days ago, I had connection problems and technicians from BSNL resolved it. The connection works just fine in Windows 7, but now it does not work in uBuntu.
Now the dialer simply tries to connect and gives up after some time. I've even tried downloading the ZTE's dialer from the official site, but it does not work (connects, but does not work; shows 0kbps all the time).
What is the recommended way of fixing this? If more information is needed, let me know. I just love to surf the net through uBuntu.
I found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code: su - instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
I'm running Ubuntu 10.04 in South Africa and I am using a Neotel telephone device that connects with EVDO. I have followed instructions to get it working by typing: sudo modprobe usbserial vendor=0x1d09 product=0x4000.
I have also put it in /etc/init.d/rc.local to get it to load up on startup. This works and I am able to connect using the network manager. The problem is if I disconnect and then try to connect again later, it refuses to connect till I reboot and then it works, till I disconnect again.
I have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
Ubuntu 11.04 isn't detecting BSNL 3G USB Datacard. I was using 10.04 earlier & could easily install it then. But now 11.04 isn't detecting the USB datacard, so I'm unable to connect to internet for updates
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
i have loaded ubuntu 9.10 few days back. I am having problem in configuring my BSNL EVDO CDMA2000 modem(Micromax MMX 300c). Guided by some of the threads, i have followed the below mentioned steps..
xxxxxxx@xxxxxxx:~$ sudo modprobe usbserial vendor=0x05c6 product=0x2001 [sudo] password for xxxxxxx:
Then connected the modem and gave the comment
xxxxxxx@xxxxxxx:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 05c6:2001 Qualcomm, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
then i edited the wvdial.conf(i dont understand the details provided in the threads in configuring .conf file)
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
I am having Dell Inspiron Laptop with Windows 7 and Ubuntu 10.04 installed in it. It is not connecting to network using Mobile.bluetooth. here are the informations. Nokia A110 - Classic BSNL Connection. Plan name is All at 49 Dell Inspiron Laptop Using Ubuntu 10.04 Error Message "Service not supported"..With Windows 7 it is working fine Can you pls help to resolve this, i need to connect to network from Ubuntu also.
how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
I live in india and I have a BSNL 3G dongle. I am using it on my laptop. I would like make phone calls using it. I was able to sends sms but no luck on voice call. In windows they provided a software for making voice calls, so the hardware supports it.
I have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
just i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
I am using Ubuntu 9.10 . And Using BSNL broadband I want to know that how to create new connection using username and password as we do it in windows.I have used pppconfig command but it gives me error that no dialer found d tell me how to create dialer in Ubuntu 9.10
I am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l Password: [root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
