I believe my old pIII Dell's network card running Ubuntu server 8.04 is busted. I need to replace it.
how to go about this. Do I just install the card and does it auto-install drivers or is there something else to do?
im trying to use this as an ssh server but i need to some how install drivers for my WMP600N V1.1 network card from linksys. so how would i go about this.
View 9 Replies View Relatednewbie with installing my second network card? I tried loading the module 8139too but it seems that both cards are using it so I am not sure if it worked.Here is the info (Debian Lenny) I get at this point:
ifconfig -a:
-----------------
eth1 Link encap:Ethernet HWaddr 00:50:ba:42:5c:a2
[code]...
I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies View RelatedI am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...
Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
Previously work normal. Started from some time ago, after reboot the server, the network card cannot be automatically started. Need to go into YAST's wired network which will activate the network card. Having checked 'chkconfig', the 'network' is on. Where can I check if they is any error log about auto enabling the network card?
View 3 Replies View RelatedI am looking for a gigabit network card for my centos 5.4 server. I am looking for something known to work well with linux. I have been on the bestbuy site and I found a DLink (DGE-530T) card with support for linux from the vendor but after reading feedback from users with that card I am not so sure it is linux friendly. I am now thinking of buying online.
View 2 Replies View RelatedI'm dealing with two dedicated servers hosted at liquidweb. The basic idea is that one machine might not be enough to handle the traffic at launch so we have a second machine to shoulder the MySQL duties -- it seemed a natural way to divy up computation burdens.
The support staff at LW tells me that each machine has three network cards
1) Public-facing NIC through which all public visitors are served
2) NIC on LAN so that liquidweb can access the machine locally for maintenance and support
3) Third NIC so that the two machines can speak to each other rapidly on their own private network. Apparently the two machines are connected via crossover cable.
It's my understanding that machine 1 has IP of 192.168.0.1 on this third card and machine 2 has IP of 192.168.0.2 on its third card. For some reason, these machines cannot speak to each other using ping, telnet, ssh, http, or MySQL.
I've contacted tech support about this issue but was wondering how I might be sure that the MySQL traffic transits the third network card on each machine. I'm guessing that it's just a matter of using the third card's IP addresses but want to be sure. Is there any way to specify a NIC when connecting via MySQL?
I'm setting up an LTSP server using Ubuntu 10.4 64bit, and PXE connecting with thin clients using Atheros cards. The ltsp environment is 32bit.
Unfortunately I get an error message with "No interfaces found! Aborting..." and a kernel panic early during PXE boot.
After an enormous amount of investigation, I've narrowed it down to (probably) being the fact that the ltsp chroot environment doesn't have the correct driver for my network card (I believe it's atl1c). The correct driver IS available in Ubuntu, though, as I can successfully boot the thin client from both 64bit and 32bit live CDs and bring up the network interface.
how can I install the correct driver in the PXE environment?
a machine with 2+ network cards, need to setup TFTP server on one card and use internet on another.
the tftpd server works on default routing network adaptor with following configuration.
How set the TFTP server on the secondary network adaptor?
TFTP server tftpd by xinetd configuration in: /etc/xinetd.d/tftp
{
protocol = udp
port = 69
socket_type = dgram
[Code]....
Could not find how to change the post <prefix> I remembered clearly I did before.
Here comes my problem: I am installing a new unit with Fedora Core 5,I will use it as my internet server. I need one additional PCI network card but it is not detected during installation.what shall I do?
View 5 Replies View RelatedIntel 1000GT gigabit Network Card itself installed successfully and shows up under network cards. However, when I plug it into the network in place of the regular 100mbit card, it won't show up.
View 8 Replies View RelatedI have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I have a good grasp on windows server 2003 but I don?t want to pay outrageous license fees for software and services and clients. I am newish to terminal as I only know a few commands. I have no problem installing services for the server edition for 10.04. Its just understanding whats going wrong to troubleshoot. I guess there is you guys and I have good working knowledge of Cisco's IOS's so I understand things like routing tables and interfaces and such for troubleshooting.
Questions I have... Can I install the desktop version of 10.04 and just install the server services? I was looking at the server guide [URL] and would like to know if these can all be installed on the desktop edition without too much trouble. I would imagine one could just use the server edition but I would really want a graphical user environment for some of the activities, if not all that I can. This would be becuase on my skills in the CLI. I priced out a server from Dell. I fits my budget perfectly if I go the Ubuntu 10.04 route. I was wondering if anyone sees any conflicts with the hardware for the Ubuntu OS....
[Code]....
I have a couple of servers which runs CentOS 5.5 and CentOS 5.4. We have decided to buy a UPS and we choose Eaton EX RT 11 plus eaton network management card minislot. I have read on the site of Eaton that they have two applications which could gracefully shutdown my servers - LanSafe and NetWatch. My experience with UPS and those applications is zero so I`m here for some advises? Do you prefer NetWatch over LanSafe?
View 2 Replies View RelatedI have a Toshiba Satellite L305-SP6944C, Pentium Dual Core 2.16, 2GB RAM, 160GB hard drive, DVD-RAM UJ880AS, display 15.6 TFT widescreen, ethernet Realtek RTL8101E/RTL8102E PCI Express, WLAN Realtek RLT8187, Opensuse 11.2 and KDE 4.3.1. Installation was OK and finally the wireless card is working... but I don't have conectivity bacause in the browser (Firefox) appears a message saying "the server can't be found"
I follow the howto write by Swerdna. With ndiswrapper I install the XP driver for RLT8187, KnetworkManager is in charge of connections showing both eth0 and wlan0, the wireless sign of router Dlink DIR-280 is OK, in the dialog box of network connection I put the mac address of the wlan card but I think that is not the problem.
Other thing that I missed is that I don't find boot.ini at any directory to add modprobe ndiswrapper in the boot sequence, in etc/init.d/ appears a "boot" file, is this file that I have to change to modprobe ndiswrapper??
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedCannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View Relatedi am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies View Relatedhow to connect my network data card to run internet on openSuse..
View 4 Replies View RelatedI have a laptop connected to the the net thru an adsl modem, when I switch off the laptop network interface,(thru system-config-network) the light of the laptop network card plugged in the router stays on ( green) where as in my pc, when i do the same thing , the light of my pc network card goes off in the modem
View 5 Replies View RelatedHow do you set the MTU on the network card for Jumbo Frames? The MTU drop drown only goes to 1500 which is far from the Jumbo frame rate of 9000. If I type 9000 in will it blow anything up?
View 5 Replies View Relatedi've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
I have just purchased a HTPC - cheap purchase pre-built from ebay - ideal size - small box - not too out of place in the lounge.The HTPC has one rj45 connection built on to the mobo, with a wireless card + aerial in the back (wireless broadband) and I am going to take the dtv card out and replace it with anothe rj45 card.I intend to run ubuntu server 10.10 on the server and I intend to connect my sky broadband through the server to give me the security of a server based firewall and the security of the server as a whole.
View 5 Replies View RelatedTotal Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies View RelatedI am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?
View 6 Replies View Related