I have ZTE's 8700 800M EV-DO modem provided by BSNL. It worked like charm on my uBuntu 10.04 LTS. I simply used it through 'mobile broadband' connection in uBuntu. However, few days ago, I had connection problems and technicians from BSNL resolved it. The connection works just fine in Windows 7, but now it does not work in uBuntu.
Now the dialer simply tries to connect and gives up after some time. I've even tried downloading the ZTE's dialer from the official site, but it does not work (connects, but does not work; shows 0kbps all the time).
What is the recommended way of fixing this? If more information is needed, let me know. I just love to surf the net through uBuntu.
I use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:
I found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code: su - instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
I am having Dell Inspiron Laptop with Windows 7 and Ubuntu 10.04 installed in it. It is not connecting to network using Mobile.bluetooth. here are the informations. Nokia A110 - Classic BSNL Connection. Plan name is All at 49 Dell Inspiron Laptop Using Ubuntu 10.04 Error Message "Service not supported"..With Windows 7 it is working fine Can you pls help to resolve this, i need to connect to network from Ubuntu also.
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
resubscribed to Rapidshare and in the past could easily download my friend's discussion papers using the file manager called DTA that integrates into Firefox. I have taken out a new subscription to RS and instead of getting the files I am receiving small html referer files. In theory this should be corrected by ticking a direct download setting on RS, but it is making no difference. I can manually download the files so I am certain the files are on RS in full form. I am also successfully auto logging into RS and this means the name and password are being handed over correctly
i have loaded ubuntu 9.10 few days back. I am having problem in configuring my BSNL EVDO CDMA2000 modem(Micromax MMX 300c). Guided by some of the threads, i have followed the below mentioned steps..
xxxxxxx@xxxxxxx:~$ sudo modprobe usbserial vendor=0x05c6 product=0x2001 [sudo] password for xxxxxxx:
Then connected the modem and gave the comment
xxxxxxx@xxxxxxx:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 05c6:2001 Qualcomm, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
then i edited the wvdial.conf(i dont understand the details provided in the threads in configuring .conf file)
After I installed Windows XP on my leftover partition, I decided to reinstall grub2.
Now when I reboot grub throws me in the grub shell, if I then type configfile /grub/grub.cfg it starts grub like its supposed to. Tho I cant seem to be able to go straight to the grub menu and no to the shell.
Have just started to use look at crontab. I could use Scheduled Tasks as well as crontab -e in terminal.
I must have changed something because now Scheduled Tasks just seems to load then dropout. Loading a task through terminal is accepten (crontab -e) but doesn't work.
It was working fine. Now, when I boot the computer(9.10 32 bit), I get the message asking me about the certificate. But Pandora never seems to load. I tried to reinstall the AIR app, but it tells me that it is running. I can't find it though. If I try to open Pandora again, nothing ever happens
I got a call from a friend who did the distrubution upgrade from 9.04 to 9.10 and all was well for about 2 weeks and then his desktop icons disappeared. He kept running it that way and never looked for help until a couple of days ago he tried to plug in a card reader to get some pictures from his camera and nothing happened. that was when he discovered that he couldn't run Nautilus at all. I had him purge nautilus and reinstall it but then he couldn't even log in to Ubuntu. Very strange indeed. Anyone else experience this? After going over all the settings and finding them what they should be, I just installed 10.04 and all is well except that he lost a few photos.
Ubuntu 9.04Dell desktop pcKeyboard stopped workingI was in the middle of an emailwhen my keyboard stopped working.I rebooted.Keyboard worked for Windows Vista.Keyboard worked for Ubuntu login.But once in Ubuntu no keyboard.Mouse works fine. think I may have accidentally touchedthe control key when doing the email
I have been using Ubuntu for many years now and pressing ctrl + alt + d used to minimize all windows and show the desktop, but this stopped working with 10.10. I checked keyboard shortcuts but don't see a way to turn it back on there.
I was SSHd into my laptop which is right next to me, then it lost battery power and turned off. When I switch it on, I can't FTP, SSH into it and the Network Drive (Samba) won't work.
I installed 10.10 on release date and the microphone has worked great until now. It just stopped working. I'm on an hp pavilion dv9620 running ubuntu 10.10.
I have a computer running 8.04.4. After a large number of updates, I can no longer run ubuntu-tweak correctly. The program states "This feature is only available in Gnome Desktop Environment" on most of the items.I am POSITIVE that I am running the Gnome desktop.Also, when I reload the repositories I receive the following error:Code:W: GPG error: The following signatures couldn't be verified because the public key is not available NO_PUBKEY (then a hexadecimal number)
I have been using Ubuntu 10.10 for about a week now, I have had many, many problems, but usually figure them out by searching through this forum, except this time:I have an HP touchsmart tx2 1025dx laptop. When I installed it, everything worked great, sound, mouse, and even the touchscreen. Right now I noticed that when I press the button on by laptop which toggles the touchpad, it works but after it would freeze the menus, so that they would not drop down, I have confirmed this after many restarts. Now the touchpad has stopped working completely. Although if use the toggle button, it will still freeze by menus. It also somehow stops my keyboard from typing things into programs, like firefox, but still somehow the control-alt delete still lets me restart it.
My question is how can I reset the mouse settings/preferances to how they were when I installed? I found something a while back that was xorgconfig??? but it has since been taken out of ubuntu 10.10 (I read this somewhere, please correct me if I'm wrong.) I hope this is enough information for someone to point me in the right direction.Recap:Laptop Touchpad not workingWhen I press the toggle Touchpad button, messes up the menusUsing HP Touchsmart Tx2 1025dx LaptopLooking for a way to reset/restore sound preferences/settings or enable touchpad/ps: I was able to come here because the touchscreen is still working I ended up doing this:rm -rf .gnome .gnome2 .gconf .gconfd .metacitywhich reset ALL of my settings back to when I installed it, without deleting my programs or files.I found this here: http://linuxfud.wordpress.com/2007/0...re-installing/
I did a bunch of uninstalls and reinstalls lately, trying different distros. Now I'm back to Ubuntu but tab autocomplete in terminals doesn't work anymore. It is quite less convenient now to use the terminal. I tried changing interpreter to /bin/bash and it doesn't work. I use guake.
I just installed Xubuntu on my old ThinkPad T40, and everything worked flawlessly until last night when I rebooted, and the sound stopped working. I'd rebooted it several times before with no problems.
Giving me the message: Requested download is not authorized for use with this tracker. - idle'Vuze, when I start it, just closes before it even makes itself known!Can someone let me know of reliable torrent client with multi-tracker support, either deb install or easy to follow terminal instructions?
I can access synaptic via my unity 2D launch panel, from the apps menu and from system settings.But today I went to use it and it won't launch.I have tried to launch it with each of the above and each time to computer starts to do something and then stops. No freeze up, it just stops with the launch of synaptic.I uninstalled it via software centre and re-booted. Then via software center I re-installed it, but it still doesn't work.
So my laptop screen stopped working and i dont have the money to fix ti right now so i'm trying to use my lcd screen with it.the problem is that its set up not to mirror screens but to have 2 screens. This a problem because i cant do anything but hit alt f2 to open up terminal and google chrome and what not.access my display settings to set it up to mirror the screen because i have no top bar.all i have access to is a my display background.I'm using ubuntu 10.10 but i'm in 10.4 mode right now.
Just upgraded Ubuntu to latest release, all seems ok except for TORThis just will not work I had no problems prior to the upgrade The error message is "Test failed local proxy is unreachable or not refusing connection"Then it asks is POLIPO is running, er what or how can I check this?
I have a media center box running Ubuntu 9.10 x64 and XBMC. One day sound just stopped working on it. I did not install any updates around the time this happened. I have tried using a known working sound card. I verified the main volume is up and everything else in alsamixer looks OK. I have tried connecting known working headphones. Confirmed the kernel sees the hardware and loads to module for it. Confirmed several audio applications have no sound. I've confirmed it is set to use the correct sound card. I even booted into a live disk of the same version if Ubuntu and audio works fine there.
No errors are produced by any application, they act like they are playing audio just fine. The only entries in the logs about this I can find is below.
After 2-3 months of working fine. I have a win7 box hooked thru a KVM switch to the same speakers and they work from there. I booted up a live CD (Mint Linux 10) on the non-working machine, and the speakers work fine.I checked and I have rights to "Use audio devices".I ran the following and got:
I did an internet upgrade last night and right around then I think I also got a little liquid around the touch-pad of my laptop and now the left click won't work in Ubuntu on either my touch-pad OR mouse so I am not sure if maybe the connection for the left click on the touch-pad is shorted causing it to stay "clicked" which somehow disables the left click on the mouse... On my windows xp partition(which I am using now) I am able to use the left click on the mouse but still not the touchpad... Anyway I am wondering if there is a way to disable to touchpad via console or some other way to get around this so I can back my important docs and files and then "mouse" it till I can get a new laptop.
