Has anyone had any success with accessing stored files on any Olympus Cameras or Digital Recorders, which seem to be accessible only through "Microsoft Widows"? I thought I might have been able to access stored files by installing and running the Olympus access program in Wine but there is no communication through the USB connection. What am I missing or is it not possible?
View 4 Replies
P4 2.4ghz 2.0 ram openSUSE 11.2 KDE 4.3.5 CAMERA = olympus D575Zoom I am not sure that this post shouldn't be under the hardware section or if this only relates to digikam software. Have been using opensuse 11.2/kde4.3.5 for a few months now and for the most part its been good. It [machine and digikam] recognized my Canon xTi and I was able to download pics, no problem.
However, When I plug the usb connection into my Olympus nothing much happens. I had no problems whatsoever in opensuse 11.0 with this camera, it worked with out fail. So now when I plug the usb cable in and then plug in to the camera, this is what happens: The device notifier pops up but the device is not listed. If I open a terminal and do [mount -ls] or [lsusb] or [fdisk -l] these are my results:
[Code]....
since upgrading both my laptop (32bit) and my desktop (64 bit) to 11.2 I can no longer access the above camera either by Fspot or as a USB drive."The folder contents could not be displayed Sorry, could not display all the contents of "C770UZ": Failed to get file list: -1: Unspecified error".
View 9 Replies View RelatedUbuntu 10.04
I have followed the steps here: [URL]
and here: [URL]
I have download the i386 version.
If I do: $ sudo odvr
I get the device listed: Model: VN-960PC
If I try to run a command however, I get:
Failed to open Olympus device: couldn't claim interface
I have an iPhone 3G and an ipod Touch. i also have a friends iPhone 3G. This issue is multiple devices so I know it's not an issue with the devices. used to, i plug my iDevice in and Ubuntu automatically mounts it. Now, nothing at all happens. So, here's what I have done so far. Ubuntu can see them, but nothing happens and I don't know what to do with that.
Ubuntu 10.04 Code: Linux Ubuntu 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 GNU/Linux When I plug my iPhone it and run dmesg | tail i get Code: [ 2348.832075] usb 1-3: new high speed USB device using ehci_hcd and address 6 [ 2348.970524] usb 1-3: configuration #1 chosen from 4 choices Dunno what configuration #1 is, but I guess it's no right. Further, if I run lsusb | grep Apple it correctly identifies my device: Code: Bus 001 Device 006: ID 05ac:1292 Apple, Inc. iPhone 3G If i run ideviceinfo, i get a TON if info including my iDevices model, UUID, serial #, etc etc....several screens of info.
I have uninstalled and reinstalled libimobiledevices and even tried iFuse. It used to work, and I did nothing that owuld have changed it's behavior. My only thought is something that was included in an update at some point caused this, but Ihave no way to track that down.
The fifth field in the /etc/fstab file specifies dump frequency isn't it ?now this value can be theoretically used by backup products isn't it ?
View 2 Replies View RelatedRecently when emailing my resume in openoffice .doc format some recipients are complaining that it is unreadable. This is bad for obvious reasons. I have no idea what is going on in the ms windows/office world. I run linux exclusively.
If I can't use openoffice formatted resumes, does anyone have suggestions for sending a resume that most recipients can read?
Ubuntu 9.10 karmic - 2.6.31-21-generic kernel Openoffice.org writer 3.1
i'm a web designer and I use adobe creative suite products for my work. I would like to know if Fidora is capable of running these applications with no problem at all as I am planning on installing a new operating system which is light and very secure. Please help me out on this one as I am really interested with Fidora's features.
View 5 Replies View RelatedI just wanted to know opensource & proprietary products/tools built using libvirt (like oVirt, AbiCloud, archipel). I am a linux newbie and in a new job wherein, this is my first task to work on libvirt and create a report on existing products n benefits. it will be nice if someone guides me on libvirt advantages. If this is not the right place to ask. do suggest me an alternative website to find the information.
View 1 Replies View RelatedI am running FC14 as my host OS and am trying to install a virtual environment for academic reasons. I have tried using several different varieties including VMware and VirtualBox, but none of them seem to have any modules for the FC14 kernel. Has anyone had any luck with virtualization with FC14 as the host, that may be able to point me in a viable direction?
View 12 Replies View RelatedCan anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies View RelatedI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedI installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies View RelatedThe rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for
[code]...
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
View 1 Replies View RelatedI am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies View RelatedWould a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedI have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies View RelatedI would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View Relatedright now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies View RelatedI'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
