OpenSUSE Hardware :: Opensuse 11.3 Lockup With KWin / Everything Will Freeze Except Mouse Pointer
Aug 30, 2010
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies
ADVERTISEMENT
Jul 19, 2010
I've just installed OpenSuse 11.3 on my two Sony Vaio VPCF11Z1E machines (which have a Geforce GT 330M graphics card).Both machines appear to setup correctly and behave normally, but at seemingly random intervals (of the order of magnitude of 15-30 minutes) the whole system locks up for no readily apparent reason. I can still move the mouse pointer around the screen, but I cannot click on anything, and the whole keyboard is unresponsive (including any reasonable ctrl-alt-xxx which might normally help). The only way to get out of this seems to be to press and hold the power button to shut the whole machine off (which is not ideal!)
View 9 Replies
View Related
Jan 11, 2011
Basically when I add more than a single 2gb RAM module, my computer starts randomly crashing every half hour or so, the screen freezes with no response. I have tested the RAM with memtest 86+, it only happens when there is more than one module. The system is openSuse 11.2 64bit and it had a single 2gb RAM module when I first installed it, and removing all but this seemingly fixes the issue. The following is the error message I get when the system crashes, It seems to continue messaging after the initial visual lockup.
Jan 11 16:34:50 eddie kernel: [ 3129.580690] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) fGldbg kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
[code]....
I don't know what the problem is, but from searching the web it could be a number of problems, the memory is not being allocated correctly or it maybe there's some conflict no between my ATI HD card/driver (latest driver from ATI repo).
View 8 Replies
View Related
Jan 4, 2011
I just reinstalled openSUSE 11.3 KDE 4.5, and my mouse pointer keeps auto-clicking. It's weird because it is not even happening 100% of the time, just _most_ of the time. I am using a touchpad, and I have disabled tapping.
I had this exact same issue with Kubuntu 10.10 yesterday before I removed it. I am currently on Windows 7 and all seems well, so it is probably is a Linux software issue.
View 7 Replies
View Related
Feb 19, 2010
No matter what kernel I select to boot into, eventually I lose the mouse pointer visibility. If I move the mouse around, stuff does get highlighted, I just can't see the pointer as it moves. CTRL/ALT/BKSP does bring up a logout menu (doesn't kill X, tho), and I can tab thru it...time wasting, although it does come back from a restart with all the windows as before.
I'm running Gnome. Cpu is AMD Athelon 64 3800+ OS is 32 bit. I didn't normally have this problem before. Do I need to return to 11.0 ? Is this a Gnome problem or an X problem. I seem to remember that KDE4 had a utility that would grab the pointer from the ether and stick it back on the screen
View 9 Replies
View Related
Nov 28, 2010
I'm using 11.2 > Gnome When I (re)login to the desktop there is no mouse pointer, however the mouse is working. Hover shows emphasis and I can click once hovered. I have to go into Configure Display Settings on the Display icon in the panel and hit Apply. That restores the pointer itself. No changes, just Apply. The login screen has a mouse. Mouse Properties > (all tabs) are all default values. The mouse works perfectly other than that.
View 4 Replies
View Related
Mar 2, 2010
I installed Suse 11.2 recently, and i have my laptop hooked up to a HD monitor.
When i choose the HD monitor, if the resolution is low, lets say 1280x800, same as my laptop, its fine. I see the mouse pointer.
But as soon as i change the resolution to 1920x1080, the pointer disappears. Mouse functionality works allright. Right click/left click works fine, and i can see the buttons getting highlighted on mouse-ever.
But the pointer is gone.
View 4 Replies
View Related
Nov 14, 2009
When computer idles for 20 minutes & I return, the cursor is completely gone & cannot be retrieved, though the mouse looks like it is working, just no cursor. Also my monitor keeps changing parameters, I tried to set Sax2 but it won't save changes? What do I do? I didn't notice the cursor thing until I set up the screensaver to go off at 6 minutes.
View 9 Replies
View Related
Dec 9, 2009
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies
View Related
Mar 21, 2011
Fresh install of 32-bit 11.3 on my father's computer.He needs me to enlarge the mouse pointer and/or make it a different color. I changed it in the settings/themes thing like you are supposed to, but it appears to only take effect in Mozilla.needs the larger mouse pointer for the entire system. Evolution appears to completely ignore the mouse theme settings.
View 1 Replies
View Related
May 7, 2011
I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
View 6 Replies
View Related
Nov 28, 2009
I am creating an openSUSE 11.2 Kiosk image. I have everything pretty much locked down but when I go into the gconf-editor under /apps/nautilius/preferences/show_desktop and uncheck the check box my mouse pointer changes to the circle icon that looks like it moves in a circle. Sortta like the busy or what it does during boot. Hard to describe by typing it out but if you make that change you'll see what I am talking about. I had this setup like this in previous versions of openSUSE so I am not sure what it is doing or what else I need to do to make the mouse pointer just the arrow like normally. I don't want the users to be able to right-click on the desktops to get a menu nor add icons so unchecking the show_desktop has served my needs.
View 3 Replies
View Related
Nov 7, 2010
I have a big problem with my openSUSE 11.2 32bit (but I have experimented the same error with other distributions), this problem consist in a temporarily freeze of my system after some seconds or some minutes if I don't move the mouse or I don't press any key... but when I move the mouse or press any key the system magically wake up and each applications begins to run from the point where was interrupted... this problem also affect on the system clock that loses every second that the system remain frozenMy computer is a notebook with: CPU Intel Core2 Duo T81004GB RAMGPU GeForce 8600M GT
View 2 Replies
View Related
Jun 3, 2011
Running updated 11.04 on a older Dell Precision 360n. Been having random system freezes for the past month that requires a hard restart (REISUB doesn't work) each time. Sometimes the caps lock and scroll lock LEDs blink, other times not. sometimes it happens during boot, other times during normal usage. There hasn't been anything in any of the logs (except once, which I'll post below). This happened running 10.04 and 10.10 as well. I've run PC-check a few times and all hardware diagnostics have passed. Until today, i've been able to boot and run Trinity Rescue Kit 3.4 to mount the disk and examine the logs (and do backups), but now TRK won't boot and spews kernel panics when loading.
[code]....
View 6 Replies
View Related
Jan 31, 2010
I am having a problem with lockups on a new FC12 box (dual core 3 ghz, 4 gb memory,nvidia 8400gs). This happens reliably when replaying MythTV videos, but also randomly at other times using other apps (I suspect also boot but I can't be sure; it just occasionally stalls part way through the boot display).
Usually but not always this is accompanied by a kernel panic (caps lock + scroll lock lights flash on keyboard).
I did a core dump with kdump and it reports: Thread 1 (<main task>): Cannot access memory at address 0xffff880028025b70I am in the process of running memtest86+ right now. It's been through several passes without errors. I'm going to let it run some more, but if that is dependable it's looking like the RAM sticks are not the problem.
View 9 Replies
View Related
May 16, 2010
I've been running F@H on my system for a while now, these specs:
ASUS Rampage Formula
Q9450 @ 3.6Ghz
4GB DDR2
8800GT 512MB
Fedora 12
Running various different nvidia drivers, with working 3D, and running the latest nvidia drivers with cuda for GPU2 folding + SMP folding.
I decided to add a 9800GT to the machine for more folding PPD, and I've run into some issues.
Firstly there were problems starting X, it would hang as it started or even before it started, so I switched to RPMFusion's repo drivers which have the VGA_ARB patch applied. This now gets me into X and working 2D.
The problem I have is, although the system is completely stable running folding on all four cores, SMP, 24/7, as soon as I start anything involving 3D (such as glxgears) it will run for 3 seconds then hardlock the machine. I mean seriously lock it, no switching to terminals, and an ssh session into it from another PC dies.
Its the same with any other driver that will boot into X with the VGA_ARB patch (talking nvidia binary here).
Both cards work perfectly individually, AND both cards work, including full 3D in Windows 7 when together, which would tend to rule out a hardware fault.
Here is my xorg.conf
Code:
View 1 Replies
View Related
Oct 4, 2010
anyone has experiment this? If I install KDE 4.5 on a PC without 3D support kwin crash, if I add a 3D capable video card it works O.o VampirD
Microsoft Windows is like air conditioning
Stops working when you open a window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
[Code]...
View 1 Replies
View Related
Jan 26, 2010
I am trying to find out where in the system are the files that store information on the following: 1. keyboard shortcuts, and 2. which applications and which windows were open before the session ended. Regarding (2): I really like the fact that when I log back in, OpenSuse pops up all the windows that I had open before I last logged out. I know that this information must be stored somewhere. And most probably in my home folder. But I can't seem to find it in ~/.kde or ~/.kde4 Regarding (1): Again, I really like the Mac-OS style behavior that one gets with Ctrl+F9/F10. But sometimes I invoke it inadvertently when - as far as I can remember - my fingers were on the trackpad only. I have not been able to figure out how I do it. But I would like to be able to do it consciously - without pressing Ctrl+F9/F10. Does anyone know what could be happening. i have an HP Pavilion dv4 laptop with an otherwise annoyingly sensitive track pad.
View 3 Replies
View Related
Aug 13, 2010
I am using openSUSE 11.2 x64 with KDE 4.3.5.I am experiencing sudden, sporadic drops in performance due to the kwin and Xorg processes suddenly consuming large amounts of CPU for a few minutes (maybe 30-40% each) before dropping back to normal (1-3% each). I am seeing this using top.
View 8 Replies
View Related
Mar 29, 2011
Is there a way to disable window drag from within the window? I mean, I want the window to be movable only from the title bar. But now even if you drag the window from the content, the drag action is fired.
View 2 Replies
View Related
Aug 15, 2010
I have installed Gnome to KDE and above mentioned problem discovered. Kontact was over the whole screen and rotation of display was to the left and right not above and down. After uninstalling compiz the mentioned problems are away.
View 4 Replies
View Related
Oct 28, 2010
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
View 1 Replies
View Related
Jul 18, 2011
I have a clean new installation of openSUSE 11.4, but I can't enable the desktop effects in it. My video is nVidia GTS250 and I haven't any issues with enabling desktop effects in the past.
Code:
ilian@linux-home:~> su
Password:
linux-home:/home/ilian # cat /etc/SuSE-release
openSUSE 11.4 (x86_64)
[Code]....
View 9 Replies
View Related
Jul 20, 2011
suse 11.4 tumbleweed, kde 4.6.5, on laptop dell latitude E6510, with intel i7, 4Mb ram, NVIDIA 3100 Yesterday all effects was working well, no update and no changes, and today I dont know why but plasma crashed at startup, after a couple of try I login on gnome and renamed /home/.kde4 folder, now kde starts but when I try to enable some effects, cube, wabbling windows and others, kwin message appear sayng that effects cannot be enabled.
View 3 Replies
View Related
May 6, 2011
Accidentally I pressed alt-shift-f11 (instead of f12) and kde notified me that I switched the window manager layout to spiral: now my panel is not transparent anymore (obviously, with effects enabled). I have a standard desktop install of opensuse 11.4, with the kde themes I found out of the box. How can I restore the previous situation? If I press alt-shift-f11 nothing changes, except enabling or disablin the tiling (was it activated by default?).
View 6 Replies
View Related
Oct 5, 2010
I just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
View 11 Replies
View Related
Aug 3, 2010
I am running KDE 4.4.4 Stable from the openSuSE Repository for KDE 4.4.4 stable as included with 11.3.At first after initial installation Kontact worked and I could access Email, Address Book, Calendar, etc. from the icon bar. Now, Kontact starts, opens the Summary page, but no selections respond, only the Kwin responds to terminate the application, it just seems to hang and has to be killed to terminate. Anyone have similar issue or ideas on what may be causing it? I can start KMail, Kaddressbook, as separate applications and all respond as normal.
View 4 Replies
View Related
Jul 9, 2010
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
View 14 Replies
View Related
Jul 2, 2011
I am not sure of which LibreOffice version I am using because I can't open the ****ed program. So here's what's happening: I start LibreOffice, my screen looks unusual (it tiles a section of the screen that is the same size as the LibreOffice window (I think) across both of my monitors) and my system locks up. I am unable to use Ctrl+Alt+Backspace, Ctrl+Alt+Delete, Ctrl+Alt+F1-F8, or any other keyboard combination. No mouse click registers and the cursor acts as if the mouse is in one location (if the system locked up with my cursor over a link, the cursor stays like that) BUT the mouse still moves. Also, if I am playing music when it locks up, I can continue to hear the music and the music continues to shuffle through my playlist.
I am able to access my machine normally through ssh and the only way I've been able to fix this is to hold down the power button or pull the power. I have not identified what action causes the system to lock up, the only thing I've noticed is that LibreOffice is open every time this happens (It's happened no matter if Writer or Calc is open). The system almost always locks up upon startup of LibreOffice if the recovery window pops up, otherwise it locks up at some point during my LibreOffice session no matter what. I have not touched LibreOffice on my other machine's openSUSE installation, so I don't know how reproducible the problem is. Let me know if you need any extra information or if there are any diagnostic commands I could run.
View 9 Replies
View Related
Mar 23, 2011
11.4 Boot Freeze That is there is a BUG: soft lockup - CPU#0 stuck message and the boot hangs.The modprobe/migration codes are not identical with the linked thread. I'm stuck with CPU#0 at [modprobe:138] and #1 stuck at [migration1:8]. Generally after 61 or 63s.
This is a zypper dup from latest 11.3.The machine boots with acpi=off, luckily. But I'd like to have it all working.The forum says I can't post attachments; hwinfo output seems a bit copious to quote inline. But I'd be happy to provide any additional info obviously.
View 5 Replies
View Related
