Ubuntu 10.04
I have followed the steps here: [URL]
and here: [URL]
I have download the i386 version.
If I do: $ sudo odvr
I get the device listed: Model: VN-960PC
If I try to run a command however, I get:
Failed to open Olympus device: couldn't claim interface
Has anyone had any success with accessing stored files on any Olympus Cameras or Digital Recorders, which seem to be accessible only through "Microsoft Widows"? I thought I might have been able to access stored files by installing and running the Olympus access program in Wine but there is no communication through the USB connection. What am I missing or is it not possible?
View 4 Replies View RelatedP4 2.4ghz 2.0 ram openSUSE 11.2 KDE 4.3.5 CAMERA = olympus D575Zoom I am not sure that this post shouldn't be under the hardware section or if this only relates to digikam software. Have been using opensuse 11.2/kde4.3.5 for a few months now and for the most part its been good. It [machine and digikam] recognized my Canon xTi and I was able to download pics, no problem.
However, When I plug the usb connection into my Olympus nothing much happens. I had no problems whatsoever in opensuse 11.0 with this camera, it worked with out fail. So now when I plug the usb cable in and then plug in to the camera, this is what happens: The device notifier pops up but the device is not listed. If I open a terminal and do [mount -ls] or [lsusb] or [fdisk -l] these are my results:
[Code]....
since upgrading both my laptop (32bit) and my desktop (64 bit) to 11.2 I can no longer access the above camera either by Fspot or as a USB drive."The folder contents could not be displayed Sorry, could not display all the contents of "C770UZ": Failed to get file list: -1: Unspecified error".
View 9 Replies View RelatedI just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI'm running linux mint 8...(since it's based on ubuntu, I thought thats the place...)
I wanted to ask, how can I connect my N97 to the linux... and surf the web with it? 3G and stuff?
Every time I upload files into the web onto my ubuntuone account the ubuntuone folder can't connect and synchronize my data. In the folder when I click connect, it does not work.
View 2 Replies View RelatedI would just like to know how many page hits i am getting and to see where the IP is. How to i go about seeing this on the server ( i dont want to add a page counter or anything all i want is to see a list of IP's times when they made the connection and what they viewed ) Is there a command to see this?
View 1 Replies View RelatedI created a Live CD with Ubuntu 10.4 Desktop, in which everything seems to work except Firefox, or internet connections in general. I've tried several other Linux distros with the same results. The DSL modem is on and working (USB Westell Wirespeed duel connect modem), works with Windows XP (native OS on this computer) but not with this live cd.
Ive been inside the network manager, and have only one connection setup which is DSL and automatically connect. But when it looks for a connection, none is found (the tab on the upper right corner of the desktop with the exclamation mark).
The live cd connects at work, but it's through a server and connected to that via ethernet, so that's a completely different setup.
I've seen countless other instances of connectivity issues, and it all seems to involve hours of testing, command line editing, and other things that more often than not produce no results.
I am trying to run a script before starting to connect to a vpn (when clicking in the network manager applet). I googled: if-down.d if-post-down.d if-pre-up.d if-up.d But couldn't find any good info, only bug reports. And as I understand those will run when an interface (which one?) is upped|etc... I need to run the script BEFORE the vpn starts because it uses the command "host" and if the vpn has already started I cant access internet. The script setup routes for a list of host, so I would need to run another script to remove them after disconnecting the vpn or my normal connection wont work.
View 1 Replies View RelatedI have configured Ubuntu 10.04 to work on a Windows XP network that has 2 other XP desktops (wired to same router). Ubuntu sees the icons for each computer in the "network" tab of "places" and can access the shared files 1 of those desktops, no problem, but trying to access the other one gets the error "Unable to mount location-failed to retrieve share list from server" I have checked the XP computers and can't find what may be different about them.
View 9 Replies View Relatedi think i'm some of the way there to connecting to PostgresSQL- i dont know what it is or what it does but it is required for another program that i want to run. anyway when i run the program i get the error: "unable to connect to this database, please check the configuration". i am not entirely sure what the problem is and this might be a bigger problem than i am capable of dealing with right now as my skills in operating the terminal are not that great. so i have set up a new user and password by the terminal which im pretty sure i have done correctly.
View 1 Replies View RelatedI have 10.10 32 bit and 64 bit live CDs. Using the 32 bit, I can easily connect to my wireless router. However, the 64 bit CD, while recognizing the wireless connection, will not connect. My computer is 64 bit capable (I ran Karmic and Lucid using 64 bit). I have a 802.11 WiFi using the rt2800pci driver. Any ideas on how to get the wireless working for 10.10 64 bit? I would like to install it, just leery of wireless problems.
View 9 Replies View RelatedI recently got an app called Hipporemote and I'm trying to get it connected to my computer. Now I know that the VNC connection isn't good with security, but when you spend about 3 bucks on this software, you want it to work. Anyway, the Hipporemote sees my computer, but when I try to connect to it it keeps on saying that it doesn't have a VNC server installed, which it is by the way. how You installed or got this app working in ubuntu 10.10?
View 2 Replies View RelatedI use Ubuntu 10.10 x64 at home. My company uses Microsoft RDS (remote desktop services, aka terminal services) at work and I'd like to know if it's possible to connect from home.
On a Windows machine, there is an extra tab in the remote desktop client that allows you to specify a secure gateway to connect through - this means you don't need to establish a VPN connection beforehand, it simply just connects straight away via an SSL tunnel.
I've looked at quite a few Ubuntu RDP clients and none of them seem to have this option.
Does anyone know if it can be done? Either that or I'd like to get my hands on a copy of the 64 bit linux Cisco VPN client that works. I've found a few copies around the internet but they always fail to install.
Forgive me if this has been answered, but searches have been un-fruitful. I recently built a 64 bit Ubuntu 10.10 pc. It is sitting right next to my Windows 7 Premium 64 bit machine. They can't see each other. I disabled Homegroup on my network. Now, when I try to access Ubuntu from Windows, I am prompted for a username and password. Both systems have the SAME UW and PW. It doesn't connect.When I go from Ubuntu to connect to Windows, I am prompted or Workgroup passwords.
View 6 Replies View RelatedI was wondering if it is possible to SSH into my home PC and enable the VPN I have already set up there? After loads of Googling I have been unable to find the command!
View 2 Replies View RelatedI started usin ubuntu 10.4 only a week ago. I use reliance MG880+ for internet connection. The problem is that the modem sometimes connects and most of the times( usually when i put the system in hibernation and switch it back on or something like that) it doesn't.
View 1 Replies View RelatedI'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies View RelatedI have often connected to my machine's remotely through ssh. Today I noticed that when I connect, the "last login" IP seems a little weird to me. I'm on my home network, so I connect directly with the IP of the computer within the router. But after the IP I get this XXX.XX.X.XXX.dedicated.neoviatelecom.com.br What is the neoviatelecom part? Is that normal? I don't remember ever seeing that there before. If I connect a couple of times from my win7 laptop (through cygwin) I get the correct IP address, but followed with the other part. If I connect with my other desktop (running Karmi 9.10) I get the same neoviatelecom thing as above.
View 9 Replies View RelatedAfter installing 9.10 (clean install of the OS), each time I restart my laptop I have to "OK" the wireless connection prompt in order for it to activate. The prompt that appears is the 'wireless security' tab of the 'network connection' window--with EVERYTHING filled in as it should be.YES, I DEFINITELY have "connect automatically" checked.
View 3 Replies View RelatedI have put my record collection onto disc (Ubuntu+Audacity+Rythmbox) I would now like to play the MP3 files through my Hi-Fi. Is there a "media player" unit that can connect to a MONITOR? Note I do NOT have a TV and it looks as though these using can only connect via TV. I presume a cheap laptop would do the job but would I get Hi Fi quality sound by connecting one?
View 4 Replies View RelatedInstalled Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies View RelatedI recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies View RelatedAt work we have a Sybase Adaptiver Server 9.0 database running, it has to stay there for now, and we are developing a web application that will connect to it using PHP.I was already able to make it work using ODBC on Windows and using odbc_connect on PHP.But now we are moving to Ubuntu, and we are trying to get it to work on it.I already have Apache2 and PHP5 up and running.There are two ways (I can think of) we can do this, one is using ODBC and then use "odbc_connect" and the other is making "sybase_connect" work on PHP. Being the latter probably the best one since you wouldn't have ODBC as an intermediary.
Either way, as long as it works I'm happy. ODBC would be fine to meet our requirements for now.I already have ODBC Data Source Administrator but no idea how to create/include/add the Sybase driver.We also tried setting freetds up, but that didn't work either, we might be missing something.
I have an iPod nano (3rd generation), and I'm having issues in 10.04 (not sure if its closed to 10.04 as I cannot test on older vers.): The iPod is detecting fine and all programs recognize the iPod (Banshee, Rhythmbox and the file manager) with all the files. But when I go to delete music, the program will delete the files on the programs manager but not on my iPod. iPod is connecting but not actually making any changes?
View 2 Replies View RelatedI'm trying to connect 2 Ubuntu computers with a crossover cable (ethernet). I found the following thread:
[URL]
Its says to go to:
1. In System > Preferences > Network Connections
and under IPv4 tab, change Method to Link-Local Only.
The problem for me is I'm using Xubuntu 9.04 (on 1 of them) and I don't have "Network Connections". Is there a way to get this utility in Xubuntu 9.04 so I can set the method to 'Link local only' ?
I'm using ubuntu for about 3 years, and I update my machine each 6 months with the latest version. In the past, in order to be able to connect to IBM wireless network (LEAP) I had to enabled a restricted driver in the "System>Admin>Hardware Drivers" restricted drivers manager. I think it was Intrepid, or (Hardy), that since then the restricted driver to the wireless card is not appear in the restricted drivers manager. I'm using Thinkpad T60, Ubuntu 10.04, the Ethernet controller is Atheros Communications Inc. AR5212 802.11abg NIC (rev 01) (attached the output of lspci command) BTW - I have no problems connecting to regular wifi networks.
View 7 Replies View RelatedSituation: I can access Ubuntu from Windows XP but not XP from Ubuntu. When I try to access XP from Ubuntu I get message "Unable to mount location Failed to retrieve share list from server"
In System/Administration/Network Tools using Network device: Loopback Interface (lo) I can ping the IP address of the XP machine. Also, using Network device: Ethernet Interface (eth0) I can ping the XP by using its computer name.
In System/Preferences/Network Connections it shows under the Wired tab: Auto eth0 never used
Below are the settings in my smb.conf file.
## Browsing/Identification ###
workgroup = MSHOME
wins support = no
wins server = w.x.y.z
dns proxy = no
[Code]....
Not the best idea to dive into the Linux world on my first ever HTPC build. Anyway, here I am. I am trying to connect my computer with a fresh copy of Ubuntu 10.04 to an older CRT TV. My video card has (2) DVI ports as well as an S-Audio port. The TV has S-Audio and the white-yellow-red RCA's. I bought an S-Audio cable today but I cannot get the "detect monitor" option in system>preferences>monitor to detect anything other than the actual monitor I also have hooked up at the moment. I haven't even begun to focus on audio yet, but I expect that to be much smoother than the video side of it.
PC specs just in case:
Gigabyte P35-DS3L
Intel E8400
Generic (2) 2GB RAM
XFX 8800gts Alpha Dog
Razer Barracuda AC-1
WD 500GB