OpenSUSE Hardware :: 82801JI (ICH10 Family) HD Audio Controller On OpenSuse 11.1?
Jan 10, 2009
I am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
View 9 Replies
ADVERTISEMENT
Feb 12, 2011
I'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
View 3 Replies
View Related
Mar 14, 2010
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
View 4 Replies
View Related
Feb 17, 2010
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
View 8 Replies
View Related
Jul 7, 2010
I have an issue with my Sound on OS 11.2.It is correctly recognized under hardware and the driver seems to start properly as well when I do rcalsasound start.But under Control Center / Sound Preference there is no audio hardware listed (and hene no sound playing)
View 3 Replies
View Related
Aug 31, 2011
I have intel 82801G (ICH7 Family) High Definition Audio Controller on my Asus Eee PC 1005PXD. Unfortunately, mic recording gives very bad sound. I've tried changing sound levels but nothing has helped. My system is OpenSUSE 11.4 XFCE
View 2 Replies
View Related
Jan 16, 2010
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
View 5 Replies
View Related
Jan 11, 2011
I have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies
View Related
Mar 23, 2011
I'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
View 3 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Jun 18, 2010
I am wondering if it is possible to connect a Playstation 3 controller to OpenSUSE 11.2?
Is there any program or application that can do this, and if so what do I need in order to do this?
View 1 Replies
View Related
Apr 8, 2011
I am trying to set Empathy up and it takes my account on google talk so i can chat. But when I try to initiate an audio call it falls into an error:
"Can't establish audio stream.
There was a failure in the call engine.
Technical details:
Could not sync the state of the new nicesrc with its parent."
View 2 Replies
View Related
Feb 7, 2010
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies
View Related
Jul 3, 2009
I wonder if this is a regression, I have seen info that this bug had been in the SB600 and worked around with 2.6.26:
Here's my lspci:
uname:
This is happening on three out of three SATA disks in the system and, even though I can't explain how, seems to have caused data loss on the mdraid they support.
It would be great if someone has a good idea on this one.
adding smartctl -a, just in case
After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
View 5 Replies
View Related
Oct 27, 2010
How would i go about getting my PS2 controller working in 11.3? It's connected via a PSX to USB adapter.
View 1 Replies
View Related
Apr 16, 2010
I have the following problem: I can't authorize with my central WinNT 4.0 domain controller. I set up all parameters in YaST, but still can't see any shares or get inet access.I am using gnome and it shows several windows workgroups. While I am trying to open it, gnome shows a window to request my login credentials. I am setting up all thing right and then it shows it again. I tried smbclient utility to login, but still can't login.What can I do about it?Also I have some problems with my http proxy: suse doesn't sent it my login/password while I can easily work with proxy, that doesn't request it
View 1 Replies
View Related
Nov 27, 2009
Wine in F12 (we no longer have the i386 build, only the x86_64 build available in x86_64 systems as in F11) winecfg crashes when trying to configure any audio controller and one is installed? I remember seeing this very same behaviour happen in Fedora 11 when using the x86_64 build, but the i386 did not have this problem. As soon as you click the Audio tab and click OK to the dialog warning that there is no "Audio driver slected", Wine enters into an infinte loop trying to start the debugger.
When I have time, I'll report this to the Bugzilla, as I do not believe the x86_64 package of Wine to be a true x86_64 binary (as older releases), but the 32-bit Wine only wrapped in a Fedora x86_64 package (then again, I maight be wrong, and indeed this package is 64-bit capable, which would mean it could run 64-bit native Windows executables), at any rate, in its current state, not only does winecfg crashes when trying to poll (I think) the sound devices, but if one of the controllers is installed, also trying to run an application that has sound (a game or multimedia program) it will cause the same effect (or simply not have sound at all).
View 6 Replies
View Related
Apr 27, 2011
I need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies
View Related
Aug 19, 2010
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
View 9 Replies
View Related
Feb 11, 2011
I need to either force a redetection of my hardware or get the system to use the specific piece of hardware it is no longer using.
Details
Fedora 12
NVidia chipset/audio controller
Modprobe details of device "nVidia Corporation MCP79 High Definition Audio"
Tried installing kudzu but it does not install....
View 1 Replies
View Related
Sep 15, 2010
I am testing Suse 11.3 and have run into a problem with Intel's integrated graphics and resolution. Here is a dump of the hardware information I pulled from yast.
[Code]....
View 1 Replies
View Related
May 22, 2010
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
Code:
hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42
[code].....
View 7 Replies
View Related
Feb 17, 2011
I am new to Linux and ran into a problem with no sound after a fresh install of Debian 6.0.
Here is what I get from my I/Os. (yes speakers are on, plugged in and all volume controls have been toggled and tweaked in every which way.)
Code:
View 1 Replies
View Related
Jun 2, 2011
Yamaha 754 is not working with alsa and working with OSS Whats the problem
[Code]....
View 13 Replies
View Related
May 27, 2009
I am using a wireless Xbox 360 controller with openSUSE 11.1. I use it for some emulators and all buttons work fine. There is however an annoying problem, the Xbox controller left joystick controls the cursor and digital pad acts as mouse buttons. So while I play, the cursor moves all around the screen and bad things could happen. Why this behavior? In xorg.conf there seems to be only just 1 mouse. And if I go in Joystick via YaST, there is only a menu to select which joystick I have. But my wireless controller has been automatically detected, I didn't setup anything. Is there a config file that I can modify to stop controlling the mouse with my gamepad?
View 6 Replies
View Related
Mar 1, 2010
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
View 4 Replies
View Related
Feb 4, 2011
I'm running Debian 6.0 with the 2.6.32-5-686-bigmem kernel. I also have just moved to a new mobo which has an 82801JI based sound card. When the snd-hda-intel modules loads I get the following error:
[14966.475400] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[14966.475445] HDA Intel 0000:00:1b.0: setting latency timer to 64
[14966.504013] hda-intel: no codecs found!
[code]....
View 1 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
