OpenSUSE Install :: Installed OpenSUSE On Pen Drive Persistence Doesn't Work?
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
ADVERTISEMENT
Oct 10, 2009
My CD drive is attached as secondary slave but it doesn't appear anywhere, eg. no /dev/hdd or /dev/cdrom. It is not listet in hwinfo either. I completely re-installed SuSE from network today, so it's the newest version. The drive always worked fine in SuSE 9.x and also booting the Network Setup CD worked properly.
May there be missing packages? What do I have to check next?
View 9 Replies
View Related
Mar 13, 2010
I am trying to make Liveusb with persistence i downloaded live gnome version which is in .iso format i also downloaded win32diskimager mentioned on this page Live USB stick - openSUSE but it only .img files i also tried unetbootin ,there is no option for 11.2 version my laptop doesn't have cd/dvd drive so to install on hardisk i have to do it by usb,so i thouht of going for live usb. are there any alternatives
View 9 Replies
View Related
Aug 31, 2010
I have a hard time mounting two external drives on my Suse 11.3. When I use the device notifier gadget both drives get mounted in /media/<drive name>, the vfat drive is read-only though. However, I would like to mount both drives under /<drive name> in separate directories and rw. I looked at the devices in /dev/ and entered the device name to fstab, set the mount point, file system (vfat, and ntfs-3g) and set 'rw,noauto,exec,user,sync 0 0'.
This way I could mount my vfat drive read-only under /<drive name>, but not the ntfs one. After a reboot i noticed that the external drives get different IDs in /dev. E.g. what I had in my fstab under /dev/sdc1 got /dev/sdf1, and /dev/sdc was unknown. I am doing something wrong here, what worked in 11.0 does not seem to work here.
[code]...
View 2 Replies
View Related
May 9, 2010
OpenSUSE 11.2 x86_64
KDE SC 4.4.3
Linux 2.6.34-rc6-29-desktop (from KERNEL:HEAD)
HAL 0.5.13-4.2.1
udisks 1.0.0.git20100224-11.1
ASRock G43Twins-FullHD LGA 775 Intel G43 Micro ATX Intel Motherboard
Samsung 22X DVDR DVD Burner Black SATA Model SH-S223Q (connected via SATA. detected as: /dev/sr0)
Discs are read by the drive when inserted (they are spun and the LED light on the drive lights up) but nothing happens after that.
I disconnected the SATA cable and tried a new SATA cable on a different SATA port and also tried a different SATA power cable but that did not fix anything.
View 9 Replies
View Related
Dec 27, 2009
Since I had a little time on my hand over christmas break, I decided to do my sister a favor and install linux on her computer (consentually, mind you). But so far, I've caused nothing but trouble, since I can't get Suse to boot. I've reinstalled over and over and over, but everytime I install and reboot, the computer complains that there is no operating system installed.
After a while of reinstalling, I tried to install a boot loader from the live cd instead, but when I open yast to do this, it compains that 'because of the partitions, the bootloader can't be installed properly'.
I've tried pretty much about everything, but nothing seems to work.
View 4 Replies
View Related
Mar 30, 2010
As stated, NO USB functions, not at all, the light on the mouse is on, but it does not move on screen, the PS2 keyboard does not function either. Nothing that would allow you to install it, works at all. I am absolutely shocked not one single person on here has mentioned this.
The last time I tried OpenSuse was version 10, it installed without issue, I noted the installer as the nicest one in the Linux world I had seen to date, only to be utterly let down by this USB fumble.I have Legacy USB support, Legacy Keyboard and Legacy Mouse USB support on, that isn't the issue, and this didn't happen with 10 on the same system.
View 7 Replies
View Related
Feb 16, 2010
I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies
View Related
Aug 23, 2010
I would like to have the opensuse 10.3 DVD for installing gcc. (I lost the original DVD and with opensuse 11 my laptop does not work) Do you know a webpage where I can download it? The official page doesn't work.
View 6 Replies
View Related
Apr 5, 2010
I am using this image of Debian: [URL]. But it doesn't matter what I do I fail to make it persistent.
I have tried this: [URL] But there is no "grub" on my "install" drive, apparently is an outdated notion.
I have tried this: [URL] (with conflicting info regarding the previous link). By booting with a knoppix USB with gparted. Doesn't matter if I leave the NTFS partition unnamed or call it home_rw, I get no persistence, even writing persistent while booting.
I have tried also changing this (while in knoppix): [URL]. Basically adding the word "persistent" after "live" but it does not work. All changes I make disappear. What it the current way of getting persistence with this package?
View 2 Replies
View Related
Feb 11, 2011
I think I broke something. I have been playing with SUSE 11.3 for 2 days now getting it ready for me to work on. Now that I want to put some pictures on, I notice my DVD/CD is not working at all. I can seethe icon in Nautilus but when I click on it nothing happens. I ran the hardware info from Yast and this is what came up.
55: SCSI 100.0: 10602 CD-ROM (DVD)
[Created at block.249]
Unique ID: KD9E.dkrhozW_Ty1
Parent ID: vuMS.iyIwgooRAo4
SysFS ID: /class/block/sr0
SysFS BusID: 1:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:0e.0/host1/target1:0:0/1:0:0:0
Hardware Class: cdrom .....
I cant seem or know how to mount it if need be. I opened the System Services and saw this. Start the autofs daemon for automatic mounting of filesystems. This is set to off. should it be on? I'm thinking it is just for HDs though. I have no clue. I was doing the live cd thing for a while and it worked great. Then I thought.. hey do a full install with dual boot and learn this linux stuff.
View 5 Replies
View Related
May 19, 2010
I've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
View 1 Replies
View Related
Apr 21, 2011
I've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.
Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc
It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.
I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.
how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.
ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.
View 2 Replies
View Related
Jan 29, 2010
i have a problem when i use test drive, it doesn't boot into the operating system. it just look like in dos when i login. what is wrong? shouldn't test drive let me see how its look when i use the live CD?
View 9 Replies
View Related
Jun 6, 2010
I have one problem with taking screenshots during SUSE installation. I am using 10.2 version. Button PrtSc does not work and Terminal is not available during installation (at least I think it isnt)Do you have any idea how to do it?
View 4 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Apr 20, 2011
The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Nov 23, 2010
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies
View Related
Sep 1, 2011
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
View 1 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Dec 21, 2008
I'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:
[Code]...
eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)
View 5 Replies
View Related
Feb 13, 2011
I installed openoffice. installation seemed to go well, but openoffice doesn't show up under main/applications/office. in fact - it doesn't show anywhere.
I did find it using "find files/folders" ...in the folder:
There's a file called soffice of Type: Shell script that runs openoffice. How do I add this to my menu?
View 5 Replies
View Related
Jun 14, 2010
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies
View Related
Jul 4, 2010
I have just installed a new freewrl software to use it in specific application and tried to test it by typing freewrl command in the terminal as the following:
Code:
Also I am trying to use it by clicking the freewrl icon in the kickof application launcher without any success.
I am using openSUSE11.2 with default KDE
View 5 Replies
View Related
Aug 25, 2010
using suse 11.3 and kde 4.5 I installed kvm, I tried to install widows xp, everything works well until when the windows cd restart, there kvm shows en error like no disk to boot and don't reboot to continue the installation.
View 1 Replies
View Related
Feb 17, 2010
I installed opensuse 11.2 64-bit edition. I installed all of the software I wanted.I now want to clone the installation to 6 other workstations that are 100% identical to the first.I used clonezilla to create the image, but all of the new workstations will not boot. This is due to the fact of the fstab being 100% cloned and other boot volume problems.Does anyone know of a good, easy way to clone opensuse 11.2 that will work?
View 9 Replies
View Related
Dec 15, 2010
Skype does not work in Suse 11.3. When i start in an terminal, i'm getting this error:
skype: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory
I looked for that library but didn't find it in the repositories.
PS. Running Smeegol on Samsung N150
View 9 Replies
View Related
Jan 4, 2010
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies
View Related
