I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 RepliesI have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
After installing the recent kernel update and rebooting my machine I have found a horrible fact, my computer won't boot anymore. It seems my root partition was corrupted, and running fsck on it just sends me through a endless loop of "Ignore Errors {y}:" and "Force overwrite {y}:". I have already tried the use the repair system on the installation DVD but that doesn't do anything, the pop up asking if I want to repair the file system keeps coming up when I click repair.
View 1 Replies View RelatedI have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies View RelatedI have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies View RelatedSometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies View RelatedI would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies View RelatedI am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
I did shrinking of windows drive to give 10 gb raw space for OpenSuSe 11.2 installation on my T60 laptop.OpenSuSe installer failed to create partitions out of single 10 gb RAW partition.Is there any other way to slice single RAW partition in to / , /home & swap?
View 3 Replies View RelatedSome times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
[code]....
I'm using 1TB BIOS Raid stripe 0 (Intel 82801ER ICH5R) and I want to use this configure to install Opensuse 11.2 is this correct?
1GB for /boot
5GB for swap
100GB for /
Rest of disk for /home
And other question is when I install on this configure sometimes setup hangs after finishing copying file and restart to enter configuration section.
I am about to install a test machine for testing out system configurations and software modifications.Instead of installing a virtual machine I wish to create a secondary partition which holds a "restore image" of the "clean" system. Also I would like to be able to select a system restore function in Grub while booting.
View 4 Replies View RelatedI am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
using Opensuse 11.3, I have used Ubuntu 9.10 in the past and have had a blast with Linux. I have to rehash some of my old skills that I have forgotten in the past several years..I installed 11.3, everything is working fine. However, I just releazed that after I installed it, I used my whole partition (Not Windows 7, or I would've been in hell). My Windows 7 is in Raid 0. My second HDD is 1 TB and 11.3 is on there. So, how can I trim down let's say 100 GB and just give the rest to Windows (800gbs). I need that much because I do editing for videos, etc. So, once again, how can I trim my partition and use it for Windows 7.
View 7 Replies View Relatedi want to dual boot, and create ubuntu on a second partition, and while im at it remove the windows partition that i dont use on here at all
also, i want to run chkdsk first, does anyone know how i can do that on linux?
Just installed 11.3 and upgraded kde to 4.5. Install is on Toshiba notebook with Win7 and Mepis 8.5.
Ntfs and all other partitions show in fstab and partition manager but not in Dolphin or Konqueror.
How to see and mount other partitions?
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View RelatedI've got input/output error from files in encrypted ext4 partition (external hdd), and I cannot delete them. What can I do to fix this? I don't need to recover them, I just need to delete them
View 4 Replies View RelatedI have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies View RelatedI haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
View 1 Replies View RelatedI am dual booting winxp and opensuse 11.2 on a 80gb harddrive with 3 partitions. first primary conatins xp, second logical and active contains opensuse and third primary holds data. i want to create another partition after /dev/sda3 using the free space from /dev/sda3.can u advise me if it is possible? and if yes, what do i need to consider. here is the output of fdisk -l
Code:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x285adb1d
[Code]...
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I just installed F13 x86_64 on a system that used to be running Windows 7.
The boot drive is a SATA drive attached to the motherboard which is working fine.
However, my data drive is an NTFS partition filling a 3.6TB SATA raid.
It's GPT--Gparted sees 3 unknown partitions, and gdisk shows:
Code:
How do I mount this in Fedora 13? I had intended to shrink the NTFS partition so that I can create an ext4 partition to move the data to. Will this be possible?
I've got a LOT of valuable data on this drive, and nothing else big enough to store it.
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies View RelatedI'm trying to dual-boot install ubuntu but when i start up the installer it doesn't see my ntfs windows 7 partiton (64 bit if that matters) but i can mount it in nautilus?
Also, the same exact thing happens in Pclinuxos and Sabayon.
explain the following behaviour on RHEL 5.3 in VM-ware?1. Installed RHEL 5.3 in 20 GB partition2. Not big enough3. Created 2nd. 20 GB virtual disk incl. 1 20 GB partition4. started a resuce CD5. copied / partition the new partition using "cp -R -preserver /mnt/oldpartition/* /mnt/newpartition/"6. exchanged this line in /etc/fstab:
LABEL=/ / ext3 defaults 1 1
whith this line:
/dev/sdb1 / ext3 defaults 1 1
[code]....