since upgrading both my laptop (32bit) and my desktop (64 bit) to 11.2 I can no longer access the above camera either by Fspot or as a USB drive."The folder contents could not be displayed Sorry, could not display all the contents of "C770UZ": Failed to get file list: -1: Unspecified error".
View 9 RepliesHas anyone had any success with accessing stored files on any Olympus Cameras or Digital Recorders, which seem to be accessible only through "Microsoft Widows"? I thought I might have been able to access stored files by installing and running the Olympus access program in Wine but there is no communication through the USB connection. What am I missing or is it not possible?
View 4 Replies View RelatedP4 2.4ghz 2.0 ram openSUSE 11.2 KDE 4.3.5 CAMERA = olympus D575Zoom I am not sure that this post shouldn't be under the hardware section or if this only relates to digikam software. Have been using opensuse 11.2/kde4.3.5 for a few months now and for the most part its been good. It [machine and digikam] recognized my Canon xTi and I was able to download pics, no problem.
However, When I plug the usb connection into my Olympus nothing much happens. I had no problems whatsoever in opensuse 11.0 with this camera, it worked with out fail. So now when I plug the usb cable in and then plug in to the camera, this is what happens: The device notifier pops up but the device is not listed. If I open a terminal and do [mount -ls] or [lsusb] or [fdisk -l] these are my results:
[Code]....
Ubuntu 10.04
I have followed the steps here: [URL]
and here: [URL]
I have download the i386 version.
If I do: $ sudo odvr
I get the device listed: Model: VN-960PC
If I try to run a command however, I get:
Failed to open Olympus device: couldn't claim interface
I was looking to iphone and i was surprised the quality of such tiny camera.
Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.
I have a phone Fly Q110 which can be used in the web camera mode. Under Windows all works well out of the box, but under Linux no program can use it, neither Skype, nor Cheese does.Please tell me how can I make it work under Linux because buyng Windows will be more expensive than the phone itself.
View 5 Replies View RelatedWe need to export images to camera but digikam does not support this feature. Is there any linux program that supports export to camera. Open Suse 11.3
View 1 Replies View Relatedmounting usb camera and usb mp3?
[Code]...
After installing openSUSE 11.2 everything worked well (instead of wlan working not continuously, but that's not the topic). Now my computer stopped registering the camera (it's a Canon Power Shot A540). I already tried to add it with gphoto in digiKam - the automatic search did not find it - after a manual registration gphoto could not connect to it (although it was plugged and switched on). The order lshal dumped 103 devices from the global Device List The order lshal -m started monitoring device list, but comes to no end
fdisk -l shows me my hard drive with all particions plus a mobile hard drive (connected via USB) but no camera (it's still plugged and turned on) after many hours and reading of many forum threads I don't know any further - can anybody help me find the solution for my prob?
I can't use my webcam that is incorporated in my iMac, and I couldn't find a good solution on www.
View 9 Replies View RelatedI'he just arrived in Linux openSuse 11.3. Wy camera is not recognized by the system and i'm not able to see my photos: how can I do?
View 7 Replies View RelatedSony currently only supplies its NEX cameras with .exe binary firmware updates. Prior to purchasing the camera, I installed Wine and was able to execute the .exe. Of course, that doesn't guarantee that it'll work. Now, with the camera in hand, I actually tried to update the firmware. It didn't work. I tried using Wine 1.1.28 and 1.3.3 and even the cloned the Wine repository with git and compiling Wine with USB patches I found here: [URL] (Wine git, compile and install found here: USB - The Official Wine Wiki)
With the camera connected, I was able to use "wineconsole cmd" to open a dos shell. In the shell, I was able to see that the D: drive (which I assigned to /media/disk) was correctly accessing the camera as a mass storage device. I can only conclude that USB support works. However, it doesn't appear to work for updating the firmware. The firmware program from Sony searches for about a minute and doesn't find the camera. When I run the firmware updater with Wine, Wine produces these files:
[Code]....
The .dat file looks most likely to be the data I want to dump to the camera, but how? (I've done some research and have read that the data is probably encrypted.)
I am having trouble using my new HP Web-Cam I bought from at a local Wall-Mart, All I did was just hook it up to my computer and it will not work under my operating system which is OpenSUSE 11.1. I tried finding if it detected it by looking at the hardware information and I did not see it listed.
View 2 Replies View RelatedCode:
linux-a7xq:/home/daweed66 # hwinfo --block --short
disk:
/dev/sda IC25N020ATMR04-0
/dev/sdb Kingston DataTraveler 2.0
Samsung Digital Camera
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda3 Partition
/dev/sdb1 Partition
I'm using Samsung ES55 digital camera. As you can see in the above , Kingston flash memory is assigned with /dev/sdb disk (system disk is offcourse sda). My openSUSE 11.2 see's the camera , but the device can't be assigned to it. With opensuse 11.0 I did not have this problem, and camera was mounted normally as any other external device via USB.
It is not possible to download pictures from a USB connected camera in PTP mode (SuSE 11.2), though digikam detects the camera correctly upon turning it on. I tried this with digikam, picasa, and gtkam and various cameras (Nikon D200 , Traveller, ...). The PTP download mode worked flawlessly in previous releases (11.0). I know also from other people having the same problem. However, if the camera permits to switch the USB connection to Mass storage mode, then download of images is possible. This, however, cannot serve as a general solution to the problem, because there are cameras on the market, that only have PTP mode (e.g. Nikon D300). Furthermore controlling a camera via gtkam requires PTP mode.
View 5 Replies View RelatedI've got a strange issue. I used without problem my Olmypus camera with oS 11.2 and older but sinds 11.3 and the new KDE, nothing happens anymore when I plug my camera: nothing appears in the device notifier, nor in Dolphin. It did in the past, with oS 11.2 and KDE 4.3.x. But, in IceWM, with Dolphin and Digikam it does work (it appears like a USB stick). Not in KDE with the same applications.What I wrote in the bug report:
Steps to Reproduce:
1.Plug your digital photo camera in a USB port
2.Optional: open Dolphin
Actual Results:
Nothing happens
[Code]...
I have a recently upgraded OpenSuse 11.3 system (this problem also appeared to me in OpenSuse 11.2). I have a Sony DSC-W290 camera, and I would like to connect to this camera to get the photos. When I plug the camera to the USB the camera sets itself to "Memory Stick" but nothing happens on the Gnome Linux desktop. I assume that the system should automatically mount the filesystem as it does correctly with other devices (external USB disks and classical memory sticks).
This is the output of the last lines of 'dmesg'
[ 1948.494549] usb 1-7: new high speed USB device using ehci_hcd and address 7
[ 1948.612489] usb 1-7: New USB device found, idVendor=054c, idProduct=033e
[ 1948.612493] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1948.612495] usb 1-7: Product: DSC-W290
[ 1948.612497] usb 1-7: Manufacturer: Sony
[Code]....
I'm trying to get photos off my Canon PowerShot SD1100 IS but while Device Notifier pops up telling me I've attached a canon, and I can see it when I run lsusb, It's not actually being mounted anywhere, or creating a device for itself to be mounted with..I plug the camera in to the computer while it's still off, and I turn it off again before disconnecting (As I've heard this is the proper way to do this.) but I am still not getting a device. I've also tried the following advice (Although I'm obviously on openSUSE not Ubuntu).Ubuntu Forums - View Single Post - Unable to mount camera or import digital pictures.
View 9 Replies View Relatedi plug my camera into my laptop and it won't mount the camera's memory, when i plug the memory card directly to the laptop it mounts without problems.
1) a good DIVx/ wmv and DVD movies player?
2) audio/ mp3/ wav player
I have a Sony Camera Model DCR-IPE PAL. I have a firewire card on the computer, as well as an AV output connection.
I do not have a TV card.
I was wondering whether it was possible to capture video using my computer?
I'm giving windows 7 a break and have a fresh, updated install of opensuse 11.4. The problem I have is that when I plug my samsung galaxy S2 in I can't view the pictures I've taken with the camera.I get the popup box saying camera and giving me the option to view with gwenview, digikam and filemanager. Now i can see the folders including the DCIM folder that the images are stored in but it's empty?
View 6 Replies View RelatedIn short: the files in 11.2 of the memory card from my camera were lower case, and in 11.4 they are upper case. Thus, F-spot uploads all the photos again, and I get two copies of each, one low case (old), another upper case (new), without the comments or rotations that I had made. How can I make the system automount it again in lower case? I knew the proper options to do this manually in fstab, but not via udev or whatever it uses.
[Code]...
I am a proud owner of the Kleinweich WebCam VX 1000.
I want to use my camera with Skype under OpenSuse 11.1. The camera is listed in the yast2 hardware configuration.
I tried to test the camera with luvcview.
I only get an error message:
SDL information:
A way to get this very popular webcam working on his linux PC? If not, which camera is the perfect "LINUX" webcam?
I have a problem trying to compile v4l-dvb which is required to get my genius eye312 camera going. Fault when "make all" is issued reads make -C /home/jstocker/Applications/webcam/v4l-dvb-0b9c85378d2f/v4l all make[1]: Entering directory `/home/jstocker/Applications/webcam/v4l-dvb-0b9c85378d2f/v4l'Updating/Creating .config Preparing to compile for kernel version 2.6.27 File not found: /lib/modules/2.6.27.7-9-pae/build/.config at ./scripts/make_kconfig.pl line 32, <IN> line 4.
[Code]...
I am the owner of a webcam named "Microdia videocam NB 300", but the outcase says "Genius".
This camera DOES works on openSUSE 11.1 but not on 11.2 (my current setup) and after a lot of research i realise that the preblem is that the proper driver "sn9c102" for my webcam is not compiled on the new kernels.
# uname -r
2.6.31.12-0.2-desktop
# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code].....
I am absolutely new to linux env. I have installed opensuse 11.2 with KDE desktop on my HP pavilion dv9700 Laptop. But I am having problem configuring my webcam. I have skype installed on my laptop and webcam is working OK with skype but when I run Opensuse program Digikam, it doesnt detect any camera.
View 2 Replies View RelatedI have a Canon S95 digital camera that used to work just fine. I plugged it in, the device notifier showed a couple of actions for it, I chose digiKam and downloaded the photos. Now I tried to get new photos out of the device, but it's not showing in the device notifier any more. DigiKam shows "Canon Inc. Canon Digital Camera (auto-detected)" but doesn't do anything when selecting it.
In dmesg I see:
[ 988.197025] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 988.313730] usb 1-3: New USB device found, idVendor=04a9, idProduct=3212
[ 988.313734] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 988.313738] usb 1-3: Product: Canon Digital Camera
[ 988.313741] usb 1-3: Manufacturer: Canon Inc.
[ 988.313743] usb 1-3: SerialNumber: [number]
So it works but KDE doesn't seem to be able to notice it. I'm using openSuse 11.3 with KDE 4.6 RC1, and it might be that 4.6 betas/rc broke the functionality though I'm not sure.
I'm running 11.3 with KDE 4.4.4 and I'm trying to get my camera to work. DigiKam sees it and knows what it is but can't see or download any of the pictures on it. I'm wondering if there's some step or file that I'm missing.
View 1 Replies View RelatedI've recently upgraded from 10.3 to 11.2 (32 bit). On my 10.3 system I was able to sync my Palm Treo, plug in cameras and they'd pop us as filesystems etc. Now, although my printer, and ipod are recognised, anything else I plug in isn't.
* When I plug my camera in and turn it on, nothing happens
* When I try to sync my Palm Treo, it seems that the /dev/pilot device isn't created by kpilot.
What i am i doing wrong? i download these very good app's from yast
and at times i run into a problem when you click on the app and it looks like it wants to open,the application's icon is on the bottom panel and the icon is bouncing up and down where there cursor is and then eventually it disappears.Is it timing out?