OpenSUSE Install :: Unaccessible And Not Used 1.2 Tb Ghost Ext4 Partition Made During Installation?
Sep 16, 2010
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
View 9 Replies
ADVERTISEMENT
Feb 2, 2010
I have a question about ext4,remastersys backup : I have upgraded from 9.04 to 9.10 via the upgrade button in synaptics, so it means that the files system was not touched, which means that my system is still ext3 as it was when I installed the 9.04. I can make a backup of my system as it is configured right now (that's how i like it) using remastersys.
Can I install my system backup into my machine after formating it into ext4 or when I create a backup using remastersys it must stay in the files system as it was when it was backed up? The issue is that right now the 9.10 responds from some reason a little bit slower than my 9.04 responded (to everything e.g. open/close windows etc...) and I read in the forum that ext4 makes 9.10 run faster.
View 1 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Mar 24, 2010
After installing the recent kernel update and rebooting my machine I have found a horrible fact, my computer won't boot anymore. It seems my root partition was corrupted, and running fsck on it just sends me through a endless loop of "Ignore Errors {y}:" and "Force overwrite {y}:". I have already tried the use the repair system on the installation DVD but that doesn't do anything, the pop up asking if I want to repair the file system keeps coming up when I click repair.
View 1 Replies
View Related
Nov 11, 2010
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies
View Related
Jan 1, 2011
I have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies
View Related
Jan 4, 2010
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
View 9 Replies
View Related
May 1, 2010
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies
View Related
May 22, 2011
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies
View Related
Jan 14, 2010
I was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies
View Related
Jun 10, 2009
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies
View Related
Feb 9, 2011
Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
[code]....
View 9 Replies
View Related
Jan 19, 2010
I have been using GHOST for quite a few years to back up my Windoze partitions from NTFS to a series of images on a fat32 partition. I usually boot off a DOS7 bootable CD and simply ghost over to the fat32 partition.
I am rebuilding my laptops and desktops to dual boot Windows7 and Suse 11.2
My goal is to create restore images from my NTFS and ext3 partitions into directories on the fat32 partition for a restoration to my "gold baseline" build after any corruption.
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
5 = /
6 = /fat32
[Code]....
View 9 Replies
View Related
Feb 12, 2011
So I just found out how to install Ubuntu, and found something wrong. I made a partition for the install and when I went to install it, it already had 4 partitions. The recovery and other stuff, so that means the partition I made cannot be used. D: How do I fix this?
View 6 Replies
View Related
Sep 19, 2010
I have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
View 4 Replies
View Related
Jan 29, 2010
here is my current partition table
Code:
Disk /dev/sdb: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
View 1 Replies
View Related
May 19, 2010
I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
View 4 Replies
View Related
May 29, 2011
i have two hard drives,sda sdb. sda1 contains my xp,i want to work with windows on sdb1
bcoz of performance reason. ive used partimage to create an image and restore it to
sdb2 while doing so im getting an error that the sdb1 partition is too small ..,this makes me understand that partimage copies all the partition bit by bit with probably the boot sector as well. but thats not the behaivor i want. i belive what i did so far is like doing ghost with partition->to partition. it means the destination partition shuld be greater or the same.. is there any ghost partition->to image like in linux? partimage only works on partitions?(i.e cant do disk image) i think my answer is somewhere around copy the files with cp, and tar gz them.
View 5 Replies
View Related
May 12, 2011
Kubuntu 10.04, i386, new install. Can't access EXT4 partition on same HDD. Celeron, desktop.
View 14 Replies
View Related
Sep 12, 2010
I've got input/output error from files in encrypted ext4 partition (external hdd), and I cannot delete them. What can I do to fix this? I don't need to recover them, I just need to delete them
View 4 Replies
View Related
Jun 4, 2010
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies
View Related
Jul 26, 2011
I have tried countless things and am at a complete loss. I'm pretty new to Ubuntu and Linux in general, just so everyone knows. Here's my problem: I can run the 10.10 install disc as a Live CD and have perfectly functional internet. However, when I install into a clean ext4 partition, I have zero internet support. I have Googled the heck out of this problem, too.I've tried tinkering with IPv6 settings, I've tried scouring my BIOS for anything relating to "Wake-on-LAN" (It's enabled in Windows 7, by the way, which is what I dual-boot into), and several other network-related ideas I've read online. None have had any effectEDIT: Additional details: ethernet worked like a champ in 10.04, and in 10.10 when I did an upgrade instead of a clean install. I had this same ethernet problem in a clean 11.04 install (which also worked in Live CD form), too, which is why I tried 10.04 to begin with.
View 9 Replies
View Related
Jun 5, 2010
i tried to install f13 from live cd and failed. i have 2 questions. i do not understand how to setup partitions according to scottro's message. It says you need small ext3-formatted /boot partion and a ext4-formatted root partition. Does this configuration have to be setup before you boot into the live cd? If so, please tell me how to set this up. my pc is pentium d with 2 hard drives. The master hd is has xp, ubuntu8.04, and swap partitions. I would like to use one-half of the slave drive for f13.
Second question. I would like to be able to verify download of fedora-13-i686.iso. I downloaded it to my xp partition and installed Windows MD5summer. Where or how do i get the md5 file for this iso file?
View 14 Replies
View Related
Dec 14, 2009
I understand that the new 11.2 version has a new kernel optimized for desktop use. Can someone tell me or show me where I can find the new kernel configuration options? I would like to see what options they choose to change.
View 2 Replies
View Related
Feb 6, 2011
I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.
View 2 Replies
View Related
Feb 11, 2011
I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.
Tried to put WinXP on it just because I was that frustrated, no luck.
Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.
No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.
Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.
View 1 Replies
View Related
Jun 13, 2010
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
View 3 Replies
View Related
May 14, 2010
I can't seem to get past step 6 of he installation of Ubuntu 10.04. I get the error: The ext4 file system creation failed... on single partition (no raid). I chose ' / ' as the mount point, and have tried with and without a swap drive. I'm installing on a Sony VAIO VGN-NS160D, and the HDD was previously formatted to NTFS. There's no other OS so I don't see any way of getting a command line to try a sudo fdisk..
View 1 Replies
View Related
Oct 10, 2010
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
View 2 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
